On Tue, Aug 06, 2019 at 06:12:12PM +0300, Daniel Baluta wrote: > New IP version introduces Version ID and Parameter registers > and optionally added Timestamp feature. > > VERID and PARAM registers are placed at the top of registers > address space and some registers are shifted according to > the following table: > > Tx/Rx data registers and Tx/Rx FIFO registers keep their > addresses, all other registers are shifted by 8. > > SAI Memory map is described in chapter 13.10.4.1.1 I2S Memory map > of the Reference Manual [1]. > > In order to make as less changes as possible we attach an offset > to each register offset to each changed register definition. The > offset is read from each board private data. > > [1]https://cache.nxp.com/secured/assets/documents/en/reference-manual/IMX8MDQLQRM.pdf?__gda__=1563728701_38bea7f0f726472cc675cb141b91bec7&fileExt=.pdf > > Signed-off-by: Mihai Serban <mihai.serban@xxxxxxx> > [initial coding in the NXP internal tree] > Signed-off-by: Shengjiu Wang <shengjiu.wang@xxxxxxx> > [bugfixing and cleanups] > Signed-off-by: Daniel Baluta <daniel.baluta@xxxxxxx> > [adapted to linux-next] Acked-by: Nicolin Chen <nicoleotsuka@xxxxxxxxx> One small request that we can do with a separate patch later: > struct fsl_sai_soc_data { > bool use_imx_pcm; > unsigned int fifo_depth; > + unsigned int reg_offset; > }; I think we need a list of comments for the structure defines. It might be okay for the old two entries but reg_offset isn't that explicit any more. _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
