From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx> ADG is using clk_get_rate() under atomic context, thus, we might have scheduling issue. To avoid this issue, we need to get/keep clk rate under non atomic context. We need to handle ADG as special device at Renesas Sound driver. >From SW point of view, we want to impletent it as rsnd_mod_ops :: prepare, but it makes code just complicate. To avoid complicated code/patch, this patch adds new clk_rate[] array, and keep clk IN rate when rsnd_adg_clk_enable() was called. Reported-by: Leon Kong <Leon.KONG@xxxxxxxxxxxx> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx> Tested-by: Leon Kong <Leon.KONG@xxxxxxxxxxxx> --- sound/soc/sh/rcar/adg.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) diff --git a/sound/soc/sh/rcar/adg.c b/sound/soc/sh/rcar/adg.c index fce4e05..b9aacf3 100644 --- a/sound/soc/sh/rcar/adg.c +++ b/sound/soc/sh/rcar/adg.c @@ -30,6 +30,7 @@ struct rsnd_adg { struct clk *clkout[CLKOUTMAX]; struct clk_onecell_data onecell; struct rsnd_mod mod; + int clk_rate[CLKMAX]; u32 flags; u32 ckr; u32 rbga; @@ -114,9 +115,9 @@ static void __rsnd_adg_get_timesel_ratio(struct rsnd_priv *priv, unsigned int val, en; unsigned int min, diff; unsigned int sel_rate[] = { - clk_get_rate(adg->clk[CLKA]), /* 0000: CLKA */ - clk_get_rate(adg->clk[CLKB]), /* 0001: CLKB */ - clk_get_rate(adg->clk[CLKC]), /* 0010: CLKC */ + adg->clk_rate[CLKA], /* 0000: CLKA */ + adg->clk_rate[CLKB], /* 0001: CLKB */ + adg->clk_rate[CLKC], /* 0010: CLKC */ adg->rbga_rate_for_441khz, /* 0011: RBGA */ adg->rbgb_rate_for_48khz, /* 0100: RBGB */ }; @@ -302,7 +303,7 @@ int rsnd_adg_clk_query(struct rsnd_priv *priv, unsigned int rate) * AUDIO_CLKA/AUDIO_CLKB/AUDIO_CLKC/AUDIO_CLKI. */ for_each_rsnd_clk(clk, adg, i) { - if (rate == clk_get_rate(clk)) + if (rate == adg->clk_rate[i]) return sel_table[i]; } @@ -369,10 +370,18 @@ void rsnd_adg_clk_control(struct rsnd_priv *priv, int enable) for_each_rsnd_clk(clk, adg, i) { ret = 0; - if (enable) + if (enable) { ret = clk_prepare_enable(clk); - else + + /* + * We shouldn't use clk_get_rate() under + * atomic context. Let's keep it when + * rsnd_adg_clk_enable() was called + */ + adg->clk_rate[i] = clk_get_rate(adg->clk[i]); + } else { clk_disable_unprepare(clk); + } if (ret < 0) dev_warn(dev, "can't use clk %d\n", i); -- 2.7.4 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx https://mailman.alsa-project.org/mailman/listinfo/alsa-devel