On Mon, Aug 05, 2019 at 10:33:25AM -0500, Pierre-Louis Bossart wrote:
>
>
> On 8/5/19 4:56 AM, Sanyog Kale wrote:
> > On Thu, Jul 25, 2019 at 06:40:15PM -0500, Pierre-Louis Bossart wrote:
> > > When we disable the stream and then call hw_free, two bank switches
> > > will be handled and as a result we re-enable the stream on hw_free.
> > >
> >
> > I didnt quite get why there will be two bank switches as part of disable flow
> > which leads to enabling of stream?
>
> You have two bank switches, one to stop streaming and on in de-prepare. It's
> symmetrical with the start sequence, where we do a bank switch to prepare
> and another to enable.
Got it. I misunderstood it that two bank switches are performed as part of
disable_stream.
>
> Let's assume we are using bank0 when streaming.
>
> Before the first bank switch, the channel_enable is set to false in the
> alternate bank1. When the bank switch happens, bank1 become active and the
> streaming stops. But bank0 registers have not been modified so when we do
> the second bank switch in de-prepare we make bank0 active, and the ch_enable
> bits are still set so streaming will restart... When we stop streaming, we
> need to make sure the ch_enable bits are cleared in the two banks.
This is clear. Even though the channels remains enabled, i believe there
won't be any data pushed on lines as stream will be closed.
Regarding mirroring approach, I assume after bank switch we will take
snapshot of active bank and program same in inactive bank.
>
>
> >
> > > Make sure the stream is disabled on both banks.
> > >
> > > TODO: we need to completely revisit all this and make sure we have a
> > > mirroring mechanism between current and alternate banks.
> > >
> > > Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
> > > ---
> > > drivers/soundwire/stream.c | 19 ++++++++++++++++++-
> > > 1 file changed, 18 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c
> > > index 53f5e790fcd7..75b9ad1fb1a6 100644
> > > --- a/drivers/soundwire/stream.c
> > > +++ b/drivers/soundwire/stream.c
> > > @@ -1637,7 +1637,24 @@ static int _sdw_disable_stream(struct sdw_stream_runtime *stream)
> > > }
> > > }
> > > - return do_bank_switch(stream);
> > > + ret = do_bank_switch(stream);
> > > + if (ret < 0) {
> > > + dev_err(bus->dev, "Bank switch failed: %d\n", ret);
> > > + return ret;
> > > + }
> > > +
> > > + /* make sure alternate bank (previous current) is also disabled */
> > > + list_for_each_entry(m_rt, &stream->master_list, stream_node) {
> > > + bus = m_rt->bus;
> > > + /* Disable port(s) */
> > > + ret = sdw_enable_disable_ports(m_rt, false);
> > > + if (ret < 0) {
> > > + dev_err(bus->dev, "Disable port(s) failed: %d\n", ret);
> > > + return ret;
> > > + }
> > > + }
> > > +
> > > + return 0;
> > > }
> > > /**
> > > --
> > > 2.20.1
> > >
> >
--
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
