On Sun, Jul 28, 2019 at 10:24:25PM +0300, Daniel Baluta wrote: > SAI supports up to 8 Rx/Tx data lines which can be enabled > using TCE/RCE bits of TCR3/RCR3 registers. > > Data lines to be enabled are read from DT fsl,dl-mask property. > By default (if no DT entry is provided) only data line 0 is enabled. > > Signed-off-by: Daniel Baluta <daniel.baluta@xxxxxxx> > --- > sound/soc/fsl/fsl_sai.c | 11 ++++++++++- > sound/soc/fsl/fsl_sai.h | 4 +++- > 2 files changed, 13 insertions(+), 2 deletions(-) > > diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c > index 637b1d12a575..5e7cb7fd29f5 100644 > --- a/sound/soc/fsl/fsl_sai.c > +++ b/sound/soc/fsl/fsl_sai.c > @@ -601,7 +601,7 @@ static int fsl_sai_startup(struct snd_pcm_substream *substream, > > regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx), > FSL_SAI_CR3_TRCE_MASK, > - FSL_SAI_CR3_TRCE); > + FSL_SAI_CR3_TRCE(sai->soc_data->dl_mask[tx]); > > ret = snd_pcm_hw_constraint_list(substream->runtime, 0, > SNDRV_PCM_HW_PARAM_RATE, &fsl_sai_rate_constraints); > @@ -888,6 +888,15 @@ static int fsl_sai_probe(struct platform_device *pdev) > } > } > > + /* > + * active data lines mask for TX/RX, defaults to 1 (only the first > + * data line is enabled > + */ > + sai->dl_mask[RX] = 1; > + sai->dl_mask[TX] = 1; > + of_property_read_u32_index(np, "fsl,dl-mask", RX, &sai->dl_mask[RX]); > + of_property_read_u32_index(np, "fsl,dl-mask", TX, &sai->dl_mask[TX]); Just curious what if we enable 8 data lines through DT bindings while an audio file only has 1 or 2 channels. Will TRCE bits be okay to stay with 8 data channels configurations? Btw, how does DMA work for the data registers? ESAI has one entry at a fixed address for all data channels while SAI seems to have different data registers. _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
