From: Rander Wang <rander.wang@xxxxxxxxxxxxxxx> The existing code uses an OR operation which would mix the original divider setting with the new one, resulting in an invalid configuration that can make codecs hang. Add the mask definition and use cdns_updatel to update divider Signed-off-by: Rander Wang <rander.wang@xxxxxxxxxxxxxxx> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx> --- drivers/soundwire/cadence_master.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/soundwire/cadence_master.c b/drivers/soundwire/cadence_master.c index 10ebcef2e84e..18c6ac026e85 100644 --- a/drivers/soundwire/cadence_master.c +++ b/drivers/soundwire/cadence_master.c @@ -57,6 +57,7 @@ #define CDNS_MCP_SSP_CTRL1 0x28 #define CDNS_MCP_CLK_CTRL0 0x30 #define CDNS_MCP_CLK_CTRL1 0x38 +#define CDNS_MCP_CLK_MCLKD_MASK GENMASK(7, 0) #define CDNS_MCP_STAT 0x40 @@ -988,9 +989,11 @@ int sdw_cdns_init(struct sdw_cdns *cdns) /* Set clock divider */ divider = (prop->mclk_freq / prop->max_clk_freq) - 1; val = cdns_readl(cdns, CDNS_MCP_CLK_CTRL0); - val |= divider; - cdns_writel(cdns, CDNS_MCP_CLK_CTRL0, val); - cdns_writel(cdns, CDNS_MCP_CLK_CTRL1, val); + + cdns_updatel(cdns, CDNS_MCP_CLK_CTRL0, + CDNS_MCP_CLK_MCLKD_MASK, divider); + cdns_updatel(cdns, CDNS_MCP_CLK_CTRL1, + CDNS_MCP_CLK_MCLKD_MASK, divider); pr_err("plb: mclk %d max_freq %d divider %d register %x\n", prop->mclk_freq, @@ -1064,8 +1067,7 @@ int cdns_bus_conf(struct sdw_bus *bus, struct sdw_bus_params *params) mcp_clkctrl_off = CDNS_MCP_CLK_CTRL0; mcp_clkctrl = cdns_readl(cdns, mcp_clkctrl_off); - mcp_clkctrl |= divider; - cdns_writel(cdns, mcp_clkctrl_off, mcp_clkctrl); + cdns_updatel(cdns, mcp_clkctrl_off, CDNS_MCP_CLK_MCLKD_MASK, divider); pr_err("plb: mclk * 2 %d curr_dr_freq %d divider %d register %x\n", prop->mclk_freq * SDW_DOUBLE_RATE_FACTOR, -- 2.20.1 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx https://mailman.alsa-project.org/mailman/listinfo/alsa-devel