On Thu, Jul 25, 2019 at 06:02:13PM -0400, Paul Cercueil wrote:
> The JZ4740 boards now use the iio-hwmon driver.
>
> Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
> Tested-by: Artur Rojek <contact@xxxxxxxxxxxxxx>
Acked-by: Guenter Roeck <linux@xxxxxxxxxxxx>
> ---
> drivers/hwmon/Kconfig | 10 ---
> drivers/hwmon/Makefile | 1 -
> drivers/hwmon/jz4740-hwmon.c | 135 -----------------------------------
> 3 files changed, 146 deletions(-)
> delete mode 100644 drivers/hwmon/jz4740-hwmon.c
>
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 650dd71f9724..2199ac1d0ba7 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -660,16 +660,6 @@ config SENSORS_IT87
> This driver can also be built as a module. If so, the module
> will be called it87.
>
> -config SENSORS_JZ4740
> - tristate "Ingenic JZ4740 SoC ADC driver"
> - depends on MACH_JZ4740 && MFD_JZ4740_ADC
> - help
> - If you say yes here you get support for reading adc values from the ADCIN
> - pin on Ingenic JZ4740 SoC based boards.
> -
> - This driver can also be built as a module. If so, the module will be
> - called jz4740-hwmon.
> -
> config SENSORS_JC42
> tristate "JEDEC JC42.4 compliant memory module temperature sensors"
> depends on I2C
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index 8db472ea04f0..1e82e912a5c4 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -85,7 +85,6 @@ obj-$(CONFIG_SENSORS_INA2XX) += ina2xx.o
> obj-$(CONFIG_SENSORS_INA3221) += ina3221.o
> obj-$(CONFIG_SENSORS_IT87) += it87.o
> obj-$(CONFIG_SENSORS_JC42) += jc42.o
> -obj-$(CONFIG_SENSORS_JZ4740) += jz4740-hwmon.o
> obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o
> obj-$(CONFIG_SENSORS_K10TEMP) += k10temp.o
> obj-$(CONFIG_SENSORS_LINEAGE) += lineage-pem.o
> diff --git a/drivers/hwmon/jz4740-hwmon.c b/drivers/hwmon/jz4740-hwmon.c
> deleted file mode 100644
> index bec5befd1d8b..000000000000
> --- a/drivers/hwmon/jz4740-hwmon.c
> +++ /dev/null
> @@ -1,135 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-or-later
> -/*
> - * Copyright (C) 2009-2010, Lars-Peter Clausen <lars@xxxxxxxxxx>
> - * JZ4740 SoC HWMON driver
> - */
> -
> -#include <linux/err.h>
> -#include <linux/interrupt.h>
> -#include <linux/kernel.h>
> -#include <linux/module.h>
> -#include <linux/mutex.h>
> -#include <linux/platform_device.h>
> -#include <linux/slab.h>
> -#include <linux/io.h>
> -
> -#include <linux/completion.h>
> -#include <linux/mfd/core.h>
> -
> -#include <linux/hwmon.h>
> -
> -struct jz4740_hwmon {
> - void __iomem *base;
> - int irq;
> - const struct mfd_cell *cell;
> - struct platform_device *pdev;
> - struct completion read_completion;
> - struct mutex lock;
> -};
> -
> -static irqreturn_t jz4740_hwmon_irq(int irq, void *data)
> -{
> - struct jz4740_hwmon *hwmon = data;
> -
> - complete(&hwmon->read_completion);
> - return IRQ_HANDLED;
> -}
> -
> -static ssize_t in0_input_show(struct device *dev,
> - struct device_attribute *dev_attr, char *buf)
> -{
> - struct jz4740_hwmon *hwmon = dev_get_drvdata(dev);
> - struct platform_device *pdev = hwmon->pdev;
> - struct completion *completion = &hwmon->read_completion;
> - long t;
> - unsigned long val;
> - int ret;
> -
> - mutex_lock(&hwmon->lock);
> -
> - reinit_completion(completion);
> -
> - enable_irq(hwmon->irq);
> - hwmon->cell->enable(pdev);
> -
> - t = wait_for_completion_interruptible_timeout(completion, HZ);
> -
> - if (t > 0) {
> - val = readw(hwmon->base) & 0xfff;
> - val = (val * 3300) >> 12;
> - ret = sprintf(buf, "%lu\n", val);
> - } else {
> - ret = t ? t : -ETIMEDOUT;
> - }
> -
> - hwmon->cell->disable(pdev);
> - disable_irq(hwmon->irq);
> -
> - mutex_unlock(&hwmon->lock);
> -
> - return ret;
> -}
> -
> -static DEVICE_ATTR_RO(in0_input);
> -
> -static struct attribute *jz4740_attrs[] = {
> - &dev_attr_in0_input.attr,
> - NULL
> -};
> -
> -ATTRIBUTE_GROUPS(jz4740);
> -
> -static int jz4740_hwmon_probe(struct platform_device *pdev)
> -{
> - int ret;
> - struct device *dev = &pdev->dev;
> - struct jz4740_hwmon *hwmon;
> - struct device *hwmon_dev;
> -
> - hwmon = devm_kzalloc(dev, sizeof(*hwmon), GFP_KERNEL);
> - if (!hwmon)
> - return -ENOMEM;
> -
> - hwmon->cell = mfd_get_cell(pdev);
> -
> - hwmon->irq = platform_get_irq(pdev, 0);
> - if (hwmon->irq < 0) {
> - dev_err(&pdev->dev, "Failed to get platform irq: %d\n",
> - hwmon->irq);
> - return hwmon->irq;
> - }
> -
> - hwmon->base = devm_platform_ioremap_resource(pdev, 0);
> - if (IS_ERR(hwmon->base))
> - return PTR_ERR(hwmon->base);
> -
> - hwmon->pdev = pdev;
> - init_completion(&hwmon->read_completion);
> - mutex_init(&hwmon->lock);
> -
> - ret = devm_request_irq(dev, hwmon->irq, jz4740_hwmon_irq, 0,
> - pdev->name, hwmon);
> - if (ret) {
> - dev_err(&pdev->dev, "Failed to request irq: %d\n", ret);
> - return ret;
> - }
> - disable_irq(hwmon->irq);
> -
> - hwmon_dev = devm_hwmon_device_register_with_groups(dev, "jz4740", hwmon,
> - jz4740_groups);
> - return PTR_ERR_OR_ZERO(hwmon_dev);
> -}
> -
> -static struct platform_driver jz4740_hwmon_driver = {
> - .probe = jz4740_hwmon_probe,
> - .driver = {
> - .name = "jz4740-hwmon",
> - },
> -};
> -
> -module_platform_driver(jz4740_hwmon_driver);
> -
> -MODULE_DESCRIPTION("JZ4740 SoC HWMON driver");
> -MODULE_AUTHOR("Lars-Peter Clausen <lars@xxxxxxxxxx>");
> -MODULE_LICENSE("GPL");
> -MODULE_ALIAS("platform:jz4740-hwmon");
> --
> 2.21.0.593.g511ec345e18
>
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
