It has been replaced with the newer Ingenic NAND driver.
Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
Tested-by: Artur Rojek <contact@xxxxxxxxxxxxxx>
---
drivers/mtd/nand/raw/ingenic/Kconfig | 7 -
drivers/mtd/nand/raw/ingenic/Makefile | 1 -
drivers/mtd/nand/raw/ingenic/jz4740_nand.c | 536 ---------------------
3 files changed, 544 deletions(-)
delete mode 100644 drivers/mtd/nand/raw/ingenic/jz4740_nand.c
diff --git a/drivers/mtd/nand/raw/ingenic/Kconfig b/drivers/mtd/nand/raw/ingenic/Kconfig
index 66b7cffdb0c2..e30feb56b650 100644
--- a/drivers/mtd/nand/raw/ingenic/Kconfig
+++ b/drivers/mtd/nand/raw/ingenic/Kconfig
@@ -1,11 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-only
-config MTD_NAND_JZ4740
- tristate "JZ4740 NAND controller"
- depends on MACH_JZ4740 || COMPILE_TEST
- depends on HAS_IOMEM
- help
- Enables support for NAND Flash on JZ4740 SoC based boards.
-
config MTD_NAND_JZ4780
tristate "JZ4780 NAND controller"
depends on JZ4780_NEMC
diff --git a/drivers/mtd/nand/raw/ingenic/Makefile b/drivers/mtd/nand/raw/ingenic/Makefile
index b63d36889263..4c53f5e759c3 100644
--- a/drivers/mtd/nand/raw/ingenic/Makefile
+++ b/drivers/mtd/nand/raw/ingenic/Makefile
@@ -1,5 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
obj-$(CONFIG_MTD_NAND_JZ4780) += ingenic_nand.o
ingenic_nand-y += ingenic_nand_drv.o
diff --git a/drivers/mtd/nand/raw/ingenic/jz4740_nand.c b/drivers/mtd/nand/raw/ingenic/jz4740_nand.c
deleted file mode 100644
index acdf674fcc87..000000000000
--- a/drivers/mtd/nand/raw/ingenic/jz4740_nand.c
+++ /dev/null
@@ -1,536 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2009-2010, Lars-Peter Clausen <lars@xxxxxxxxxx>
- * JZ4740 SoC NAND controller driver
- */
-
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/partitions.h>
-
-#include <linux/gpio/consumer.h>
-
-#include <linux/platform_data/jz4740/jz4740_nand.h>
-
-#define JZ_REG_NAND_CTRL 0x50
-#define JZ_REG_NAND_ECC_CTRL 0x100
-#define JZ_REG_NAND_DATA 0x104
-#define JZ_REG_NAND_PAR0 0x108
-#define JZ_REG_NAND_PAR1 0x10C
-#define JZ_REG_NAND_PAR2 0x110
-#define JZ_REG_NAND_IRQ_STAT 0x114
-#define JZ_REG_NAND_IRQ_CTRL 0x118
-#define JZ_REG_NAND_ERR(x) (0x11C + ((x) << 2))
-
-#define JZ_NAND_ECC_CTRL_PAR_READY BIT(4)
-#define JZ_NAND_ECC_CTRL_ENCODING BIT(3)
-#define JZ_NAND_ECC_CTRL_RS BIT(2)
-#define JZ_NAND_ECC_CTRL_RESET BIT(1)
-#define JZ_NAND_ECC_CTRL_ENABLE BIT(0)
-
-#define JZ_NAND_STATUS_ERR_COUNT (BIT(31) | BIT(30) | BIT(29))
-#define JZ_NAND_STATUS_PAD_FINISH BIT(4)
-#define JZ_NAND_STATUS_DEC_FINISH BIT(3)
-#define JZ_NAND_STATUS_ENC_FINISH BIT(2)
-#define JZ_NAND_STATUS_UNCOR_ERROR BIT(1)
-#define JZ_NAND_STATUS_ERROR BIT(0)
-
-#define JZ_NAND_CTRL_ENABLE_CHIP(x) BIT((x) << 1)
-#define JZ_NAND_CTRL_ASSERT_CHIP(x) BIT(((x) << 1) + 1)
-#define JZ_NAND_CTRL_ASSERT_CHIP_MASK 0xaa
-
-#define JZ_NAND_MEM_CMD_OFFSET 0x08000
-#define JZ_NAND_MEM_ADDR_OFFSET 0x10000
-
-struct jz_nand {
- struct nand_chip chip;
- void __iomem *base;
- struct resource *mem;
-
- unsigned char banks[JZ_NAND_NUM_BANKS];
- void __iomem *bank_base[JZ_NAND_NUM_BANKS];
- struct resource *bank_mem[JZ_NAND_NUM_BANKS];
-
- int selected_bank;
-
- struct gpio_desc *busy_gpio;
- bool is_reading;
-};
-
-static inline struct jz_nand *mtd_to_jz_nand(struct mtd_info *mtd)
-{
- return container_of(mtd_to_nand(mtd), struct jz_nand, chip);
-}
-
-static void jz_nand_select_chip(struct nand_chip *chip, int chipnr)
-{
- struct jz_nand *nand = mtd_to_jz_nand(nand_to_mtd(chip));
- uint32_t ctrl;
- int banknr;
-
- ctrl = readl(nand->base + JZ_REG_NAND_CTRL);
- ctrl &= ~JZ_NAND_CTRL_ASSERT_CHIP_MASK;
-
- if (chipnr == -1) {
- banknr = -1;
- } else {
- banknr = nand->banks[chipnr] - 1;
- chip->legacy.IO_ADDR_R = nand->bank_base[banknr];
- chip->legacy.IO_ADDR_W = nand->bank_base[banknr];
- }
- writel(ctrl, nand->base + JZ_REG_NAND_CTRL);
-
- nand->selected_bank = banknr;
-}
-
-static void jz_nand_cmd_ctrl(struct nand_chip *chip, int dat,
- unsigned int ctrl)
-{
- struct jz_nand *nand = mtd_to_jz_nand(nand_to_mtd(chip));
- uint32_t reg;
- void __iomem *bank_base = nand->bank_base[nand->selected_bank];
-
- BUG_ON(nand->selected_bank < 0);
-
- if (ctrl & NAND_CTRL_CHANGE) {
- BUG_ON((ctrl & NAND_ALE) && (ctrl & NAND_CLE));
- if (ctrl & NAND_ALE)
- bank_base += JZ_NAND_MEM_ADDR_OFFSET;
- else if (ctrl & NAND_CLE)
- bank_base += JZ_NAND_MEM_CMD_OFFSET;
- chip->legacy.IO_ADDR_W = bank_base;
-
- reg = readl(nand->base + JZ_REG_NAND_CTRL);
- if (ctrl & NAND_NCE)
- reg |= JZ_NAND_CTRL_ASSERT_CHIP(nand->selected_bank);
- else
- reg &= ~JZ_NAND_CTRL_ASSERT_CHIP(nand->selected_bank);
- writel(reg, nand->base + JZ_REG_NAND_CTRL);
- }
- if (dat != NAND_CMD_NONE)
- writeb(dat, chip->legacy.IO_ADDR_W);
-}
-
-static int jz_nand_dev_ready(struct nand_chip *chip)
-{
- struct jz_nand *nand = mtd_to_jz_nand(nand_to_mtd(chip));
- return gpiod_get_value_cansleep(nand->busy_gpio);
-}
-
-static void jz_nand_hwctl(struct nand_chip *chip, int mode)
-{
- struct jz_nand *nand = mtd_to_jz_nand(nand_to_mtd(chip));
- uint32_t reg;
-
- writel(0, nand->base + JZ_REG_NAND_IRQ_STAT);
- reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL);
-
- reg |= JZ_NAND_ECC_CTRL_RESET;
- reg |= JZ_NAND_ECC_CTRL_ENABLE;
- reg |= JZ_NAND_ECC_CTRL_RS;
-
- switch (mode) {
- case NAND_ECC_READ:
- reg &= ~JZ_NAND_ECC_CTRL_ENCODING;
- nand->is_reading = true;
- break;
- case NAND_ECC_WRITE:
- reg |= JZ_NAND_ECC_CTRL_ENCODING;
- nand->is_reading = false;
- break;
- default:
- break;
- }
-
- writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL);
-}
-
-static int jz_nand_calculate_ecc_rs(struct nand_chip *chip, const uint8_t *dat,
- uint8_t *ecc_code)
-{
- struct jz_nand *nand = mtd_to_jz_nand(nand_to_mtd(chip));
- uint32_t reg, status;
- int i;
- unsigned int timeout = 1000;
- static uint8_t empty_block_ecc[] = {0xcd, 0x9d, 0x90, 0x58, 0xf4,
- 0x8b, 0xff, 0xb7, 0x6f};
-
- if (nand->is_reading)
- return 0;
-
- do {
- status = readl(nand->base + JZ_REG_NAND_IRQ_STAT);
- } while (!(status & JZ_NAND_STATUS_ENC_FINISH) && --timeout);
-
- if (timeout == 0)
- return -1;
-
- reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL);
- reg &= ~JZ_NAND_ECC_CTRL_ENABLE;
- writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL);
-
- for (i = 0; i < 9; ++i)
- ecc_code[i] = readb(nand->base + JZ_REG_NAND_PAR0 + i);
-
- /* If the written data is completly 0xff, we also want to write 0xff as
- * ecc, otherwise we will get in trouble when doing subpage writes. */
- if (memcmp(ecc_code, empty_block_ecc, 9) == 0)
- memset(ecc_code, 0xff, 9);
-
- return 0;
-}
-
-static void jz_nand_correct_data(uint8_t *dat, int index, int mask)
-{
- int offset = index & 0x7;
- uint16_t data;
-
- index += (index >> 3);
-
- data = dat[index];
- data |= dat[index+1] << 8;
-
- mask ^= (data >> offset) & 0x1ff;
- data &= ~(0x1ff << offset);
- data |= (mask << offset);
-
- dat[index] = data & 0xff;
- dat[index+1] = (data >> 8) & 0xff;
-}
-
-static int jz_nand_correct_ecc_rs(struct nand_chip *chip, uint8_t *dat,
- uint8_t *read_ecc, uint8_t *calc_ecc)
-{
- struct jz_nand *nand = mtd_to_jz_nand(nand_to_mtd(chip));
- int i, error_count, index;
- uint32_t reg, status, error;
- unsigned int timeout = 1000;
-
- for (i = 0; i < 9; ++i)
- writeb(read_ecc[i], nand->base + JZ_REG_NAND_PAR0 + i);
-
- reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL);
- reg |= JZ_NAND_ECC_CTRL_PAR_READY;
- writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL);
-
- do {
- status = readl(nand->base + JZ_REG_NAND_IRQ_STAT);
- } while (!(status & JZ_NAND_STATUS_DEC_FINISH) && --timeout);
-
- if (timeout == 0)
- return -ETIMEDOUT;
-
- reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL);
- reg &= ~JZ_NAND_ECC_CTRL_ENABLE;
- writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL);
-
- if (status & JZ_NAND_STATUS_ERROR) {
- if (status & JZ_NAND_STATUS_UNCOR_ERROR)
- return -EBADMSG;
-
- error_count = (status & JZ_NAND_STATUS_ERR_COUNT) >> 29;
-
- for (i = 0; i < error_count; ++i) {
- error = readl(nand->base + JZ_REG_NAND_ERR(i));
- index = ((error >> 16) & 0x1ff) - 1;
- if (index >= 0 && index < 512)
- jz_nand_correct_data(dat, index, error & 0x1ff);
- }
-
- return error_count;
- }
-
- return 0;
-}
-
-static int jz_nand_ioremap_resource(struct platform_device *pdev,
- const char *name, struct resource **res, void __iomem **base)
-{
- int ret;
-
- *res = platform_get_resource_byname(pdev, IORESOURCE_MEM, name);
- if (!*res) {
- dev_err(&pdev->dev, "Failed to get platform %s memory\n", name);
- ret = -ENXIO;
- goto err;
- }
-
- *res = request_mem_region((*res)->start, resource_size(*res),
- pdev->name);
- if (!*res) {
- dev_err(&pdev->dev, "Failed to request %s memory region\n", name);
- ret = -EBUSY;
- goto err;
- }
-
- *base = ioremap((*res)->start, resource_size(*res));
- if (!*base) {
- dev_err(&pdev->dev, "Failed to ioremap %s memory region\n", name);
- ret = -EBUSY;
- goto err_release_mem;
- }
-
- return 0;
-
-err_release_mem:
- release_mem_region((*res)->start, resource_size(*res));
-err:
- *res = NULL;
- *base = NULL;
- return ret;
-}
-
-static inline void jz_nand_iounmap_resource(struct resource *res,
- void __iomem *base)
-{
- iounmap(base);
- release_mem_region(res->start, resource_size(res));
-}
-
-static int jz_nand_detect_bank(struct platform_device *pdev,
- struct jz_nand *nand, unsigned char bank,
- size_t chipnr, uint8_t *nand_maf_id,
- uint8_t *nand_dev_id)
-{
- int ret;
- char res_name[6];
- uint32_t ctrl;
- struct nand_chip *chip = &nand->chip;
- struct mtd_info *mtd = nand_to_mtd(chip);
- struct nand_memory_organization *memorg;
- u8 id[2];
-
- memorg = nanddev_get_memorg(&chip->base);
-
- /* Request I/O resource. */
- sprintf(res_name, "bank%d", bank);
- ret = jz_nand_ioremap_resource(pdev, res_name,
- &nand->bank_mem[bank - 1],
- &nand->bank_base[bank - 1]);
- if (ret)
- return ret;
-
- /* Enable chip in bank. */
- ctrl = readl(nand->base + JZ_REG_NAND_CTRL);
- ctrl |= JZ_NAND_CTRL_ENABLE_CHIP(bank - 1);
- writel(ctrl, nand->base + JZ_REG_NAND_CTRL);
-
- if (chipnr == 0) {
- /* Detect first chip. */
- ret = nand_scan(chip, 1);
- if (ret)
- goto notfound_id;
-
- /* Retrieve the IDs from the first chip. */
- nand_select_target(chip, 0);
- nand_reset_op(chip);
- nand_readid_op(chip, 0, id, sizeof(id));
- *nand_maf_id = id[0];
- *nand_dev_id = id[1];
- } else {
- /* Detect additional chip. */
- nand_select_target(chip, chipnr);
- nand_reset_op(chip);
- nand_readid_op(chip, 0, id, sizeof(id));
- if (*nand_maf_id != id[0] || *nand_dev_id != id[1]) {
- ret = -ENODEV;
- goto notfound_id;
- }
-
- /* Update size of the MTD. */
- memorg->ntargets++;
- mtd->size += nanddev_target_size(&chip->base);
- }
-
- dev_info(&pdev->dev, "Found chip %zu on bank %i\n", chipnr, bank);
- return 0;
-
-notfound_id:
- dev_info(&pdev->dev, "No chip found on bank %i\n", bank);
- ctrl &= ~(JZ_NAND_CTRL_ENABLE_CHIP(bank - 1));
- writel(ctrl, nand->base + JZ_REG_NAND_CTRL);
- jz_nand_iounmap_resource(nand->bank_mem[bank - 1],
- nand->bank_base[bank - 1]);
- return ret;
-}
-
-static int jz_nand_attach_chip(struct nand_chip *chip)
-{
- struct mtd_info *mtd = nand_to_mtd(chip);
- struct device *dev = mtd->dev.parent;
- struct jz_nand_platform_data *pdata = dev_get_platdata(dev);
- struct platform_device *pdev = to_platform_device(dev);
-
- if (pdata && pdata->ident_callback)
- pdata->ident_callback(pdev, mtd, &pdata->partitions,
- &pdata->num_partitions);
-
- return 0;
-}
-
-static const struct nand_controller_ops jz_nand_controller_ops = {
- .attach_chip = jz_nand_attach_chip,
-};
-
-static int jz_nand_probe(struct platform_device *pdev)
-{
- int ret;
- struct jz_nand *nand;
- struct nand_chip *chip;
- struct mtd_info *mtd;
- struct jz_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
- size_t chipnr, bank_idx;
- uint8_t nand_maf_id = 0, nand_dev_id = 0;
-
- nand = kzalloc(sizeof(*nand), GFP_KERNEL);
- if (!nand)
- return -ENOMEM;
-
- ret = jz_nand_ioremap_resource(pdev, "mmio", &nand->mem, &nand->base);
- if (ret)
- goto err_free;
-
- nand->busy_gpio = devm_gpiod_get_optional(&pdev->dev, "busy", GPIOD_IN);
- if (IS_ERR(nand->busy_gpio)) {
- ret = PTR_ERR(nand->busy_gpio);
- dev_err(&pdev->dev, "Failed to request busy gpio %d\n",
- ret);
- goto err_iounmap_mmio;
- }
-
- chip = &nand->chip;
- mtd = nand_to_mtd(chip);
- mtd->dev.parent = &pdev->dev;
- mtd->name = "jz4740-nand";
-
- chip->ecc.hwctl = jz_nand_hwctl;
- chip->ecc.calculate = jz_nand_calculate_ecc_rs;
- chip->ecc.correct = jz_nand_correct_ecc_rs;
- chip->ecc.mode = NAND_ECC_HW_OOB_FIRST;
- chip->ecc.size = 512;
- chip->ecc.bytes = 9;
- chip->ecc.strength = 4;
- chip->ecc.options = NAND_ECC_GENERIC_ERASED_CHECK;
-
- chip->legacy.chip_delay = 50;
- chip->legacy.cmd_ctrl = jz_nand_cmd_ctrl;
- chip->legacy.select_chip = jz_nand_select_chip;
- chip->legacy.dummy_controller.ops = &jz_nand_controller_ops;
-
- if (nand->busy_gpio)
- chip->legacy.dev_ready = jz_nand_dev_ready;
-
- platform_set_drvdata(pdev, nand);
-
- /* We are going to autodetect NAND chips in the banks specified in the
- * platform data. Although nand_scan_ident() can detect multiple chips,
- * it requires those chips to be numbered consecuitively, which is not
- * always the case for external memory banks. And a fixed chip-to-bank
- * mapping is not practical either, since for example Dingoo units
- * produced at different times have NAND chips in different banks.
- */
- chipnr = 0;
- for (bank_idx = 0; bank_idx < JZ_NAND_NUM_BANKS; bank_idx++) {
- unsigned char bank;
-
- /* If there is no platform data, look for NAND in bank 1,
- * which is the most likely bank since it is the only one
- * that can be booted from.
- */
- bank = pdata ? pdata->banks[bank_idx] : bank_idx ^ 1;
- if (bank == 0)
- break;
- if (bank > JZ_NAND_NUM_BANKS) {
- dev_warn(&pdev->dev,
- "Skipping non-existing bank: %d\n", bank);
- continue;
- }
- /* The detection routine will directly or indirectly call
- * jz_nand_select_chip(), so nand->banks has to contain the
- * bank we're checking.
- */
- nand->banks[chipnr] = bank;
- if (jz_nand_detect_bank(pdev, nand, bank, chipnr,
- &nand_maf_id, &nand_dev_id) == 0)
- chipnr++;
- else
- nand->banks[chipnr] = 0;
- }
- if (chipnr == 0) {
- dev_err(&pdev->dev, "No NAND chips found\n");
- goto err_iounmap_mmio;
- }
-
- ret = mtd_device_register(mtd, pdata ? pdata->partitions : NULL,
- pdata ? pdata->num_partitions : 0);
-
- if (ret) {
- dev_err(&pdev->dev, "Failed to add mtd device\n");
- goto err_cleanup_nand;
- }
-
- dev_info(&pdev->dev, "Successfully registered JZ4740 NAND driver\n");
-
- return 0;
-
-err_cleanup_nand:
- nand_cleanup(chip);
- while (chipnr--) {
- unsigned char bank = nand->banks[chipnr];
- jz_nand_iounmap_resource(nand->bank_mem[bank - 1],
- nand->bank_base[bank - 1]);
- }
- writel(0, nand->base + JZ_REG_NAND_CTRL);
-err_iounmap_mmio:
- jz_nand_iounmap_resource(nand->mem, nand->base);
-err_free:
- kfree(nand);
- return ret;
-}
-
-static int jz_nand_remove(struct platform_device *pdev)
-{
- struct jz_nand *nand = platform_get_drvdata(pdev);
- size_t i;
-
- nand_release(&nand->chip);
-
- /* Deassert and disable all chips */
- writel(0, nand->base + JZ_REG_NAND_CTRL);
-
- for (i = 0; i < JZ_NAND_NUM_BANKS; ++i) {
- unsigned char bank = nand->banks[i];
- if (bank != 0) {
- jz_nand_iounmap_resource(nand->bank_mem[bank - 1],
- nand->bank_base[bank - 1]);
- }
- }
-
- jz_nand_iounmap_resource(nand->mem, nand->base);
-
- kfree(nand);
-
- return 0;
-}
-
-static struct platform_driver jz_nand_driver = {
- .probe = jz_nand_probe,
- .remove = jz_nand_remove,
- .driver = {
- .name = "jz4740-nand",
- },
-};
-
-module_platform_driver(jz_nand_driver);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Lars-Peter Clausen <lars@xxxxxxxxxx>");
-MODULE_DESCRIPTION("NAND controller driver for JZ4740 SoC");
-MODULE_ALIAS("platform:jz4740-nand");
--
2.21.0.593.g511ec345e18
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
