SAI supports up to 8 data lines. This property let the user configure how many data lines should be used per transfer direction (Tx/Rx). Signed-off-by: Daniel Baluta <daniel.baluta@xxxxxxx> --- Documentation/devicetree/bindings/sound/fsl-sai.txt | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt b/Documentation/devicetree/bindings/sound/fsl-sai.txt index 2e726b983845..59f4d965a5fb 100644 --- a/Documentation/devicetree/bindings/sound/fsl-sai.txt +++ b/Documentation/devicetree/bindings/sound/fsl-sai.txt @@ -49,6 +49,11 @@ Optional properties: - big-endian : Boolean property, required if all the SAI registers are big-endian rather than little-endian. + - fsl,dl_mask : list of two integers (bitmask, first for RX, second + for TX) representing enabled datalines. Bit 0 + represents first data line, bit 1 represents second + data line and so on. Data line is enabled if + corresponding bit is set to 1. Optional properties (for mx6ul): -- 2.17.1 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
