From: Shuming Fan <shumingf@xxxxxxxxxxx>
We enable the silence detection function in initial settings.
PDB control changes to manual mode, hence the driver could
fully control the AMP output on/off.
Signed-off-by: Shuming Fan <shumingf@xxxxxxxxxxx>
---
sound/soc/codecs/rt1308.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/sound/soc/codecs/rt1308.c b/sound/soc/codecs/rt1308.c
index 19d255e01827..cf3d72f99705 100644
--- a/sound/soc/codecs/rt1308.c
+++ b/sound/soc/codecs/rt1308.c
@@ -40,10 +40,10 @@ static const struct reg_sequence init_list[] = {
{ RT1308_VREF, 0x18100000 },
{ RT1308_IV_SENSE, 0x87010000 },
{ RT1308_DUMMY_REG, 0x00000200 },
- { RT1308_SIL_DET, 0x61c30000 },
+ { RT1308_SIL_DET, 0xe1c30000 },
{ RT1308_DC_CAL_2, 0x00ffff00 },
{ RT1308_CLK_DET, 0x01000000 },
- { RT1308_POWER_STATUS, 0x00800000 },
+ { RT1308_POWER_STATUS, 0x08800000 },
{ RT1308_DAC_SET, 0xafaf0700 },
};
@@ -308,12 +308,13 @@ static int rt1308_classd_event(struct snd_soc_dapm_widget *w,
case SND_SOC_DAPM_POST_PMU:
msleep(30);
snd_soc_component_update_bits(component, RT1308_POWER_STATUS,
- RT1308_POW_PDB_REG_BIT, RT1308_POW_PDB_REG_BIT);
+ RT1308_POW_PDB_REG_BIT | RT1308_POW_PDB_MN_BIT,
+ RT1308_POW_PDB_REG_BIT | RT1308_POW_PDB_MN_BIT);
msleep(40);
break;
case SND_SOC_DAPM_PRE_PMD:
snd_soc_component_update_bits(component, RT1308_POWER_STATUS,
- RT1308_POW_PDB_REG_BIT, 0);
+ RT1308_POW_PDB_REG_BIT | RT1308_POW_PDB_MN_BIT, 0);
usleep_range(150000, 200000);
break;
--
2.22.0
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
