On 2019-07-12 16:56, Oleksandr Suvorov wrote:
+enum {
+ HP_POWER_EVENT,
+ DAC_POWER_EVENT,
+ ADC_POWER_EVENT
+};
+
+struct sgtl5000_mute_state {
+ u16 hp_event;
+ u16 dac_event;
+ u16 adc_event;
+};
+
/* sgtl5000 private structure in codec */
struct sgtl5000_priv {
int sysclk; /* sysclk rate */
@@ -137,8 +156,109 @@ struct sgtl5000_priv {
u8 micbias_voltage;
u8 lrclk_strength;
u8 sclk_strength;
+ struct sgtl5000_mute_state mute_state;
Why not array instead?
u16 mute_state[ADC_POWER_EVENT+1];
-or-
u16 mute_state[LAST_POWER_EVENT+1]; (if you choose to add explicit LAST
enum constant).
Enables simplification, see below.
@@ -170,40 +290,79 @@ static int mic_bias_event(struct snd_soc_dapm_widget *w,
return 0;
}
-/*
- * As manual described, ADC/DAC only works when VAG powerup,
- * So enabled VAG before ADC/DAC up.
- * In power down case, we need wait 400ms when vag fully ramped down.
- */
-static int power_vag_event(struct snd_soc_dapm_widget *w,
- struct snd_kcontrol *kcontrol, int event)
+static void vag_and_mute_control(struct snd_soc_component *component,
+ int event, int event_source,
+ u16 mute_mask, u16 *mute_reg)
{
- struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
- const u32 mask = SGTL5000_DAC_POWERUP | SGTL5000_ADC_POWERUP;
-
switch (event) {
- case SND_SOC_DAPM_POST_PMU:
- snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER,
- SGTL5000_VAG_POWERUP, SGTL5000_VAG_POWERUP);
- msleep(400);
+ case SND_SOC_DAPM_PRE_PMU:
+ *mute_reg = mute_output(component, mute_mask);
+ break;
+ case SND_SOC_DAPM_POST_PMU:
+ vag_power_on(component, event_source);
+ restore_output(component, mute_mask, *mute_reg);
break;
-
case SND_SOC_DAPM_PRE_PMD:
- /*
- * Don't clear VAG_POWERUP, when both DAC and ADC are
- * operational to prevent inadvertently starving the
- * other one of them.
- */
- if ((snd_soc_component_read32(component, SGTL5000_CHIP_ANA_POWER) &
- mask) != mask) {
- snd_soc_component_update_bits(component, SGTL5000_CHIP_ANA_POWER,
- SGTL5000_VAG_POWERUP, 0);
- msleep(400);
- }
+ *mute_reg = mute_output(component, mute_mask);
+ vag_power_off(component, event_source);
+ break;
+ case SND_SOC_DAPM_POST_PMD:
+ restore_output(component, mute_mask, *mute_reg);
break;
default:
break;
}
+}
+
+/*
+ * Mute Headphone when power it up/down.
+ * Control VAG power on HP power path.
+ */
+static int headphone_pga_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_component *component =
+ snd_soc_dapm_to_component(w->dapm);
+ struct sgtl5000_priv *sgtl5000 =
+ snd_soc_component_get_drvdata(component);
+
+ vag_and_mute_control(component, event, HP_POWER_EVENT,
+ SGTL5000_HP_MUTE,
+ &sgtl5000->mute_state.hp_event);
+
+ return 0;
+}
+
+/* As manual describes, ADC/DAC powering up/down requires
+ * to mute outputs to avoid pops.
+ * Control VAG power on ADC/DAC power path.
+ */
+static int adc_updown_depop(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_component *component =
+ snd_soc_dapm_to_component(w->dapm);
+ struct sgtl5000_priv *sgtl5000 =
+ snd_soc_component_get_drvdata(component);
+
+ vag_and_mute_control(component, event, ADC_POWER_EVENT,
+ SGTL5000_OUTPUTS_MUTE,
+ &sgtl5000->mute_state.adc_event);
+
+ return 0;
+}
+
+static int dac_updown_depop(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *kcontrol, int event)
+{
+ struct snd_soc_component *component =
+ snd_soc_dapm_to_component(w->dapm);
+ struct sgtl5000_priv *sgtl5000 =
+ snd_soc_component_get_drvdata(component);
+
+ vag_and_mute_control(component, event, DAC_POWER_EVENT,
+ SGTL5000_OUTPUTS_MUTE,
+ &sgtl5000->mute_state.dac_event);
return 0;
}
With array approach you can simplify these 3 callbacks:
- remove local declaration of sgtl5000
- remove the need for "u16 *mute_reg" param for vag_and_mute_control
(you always provide the xxx_event field of mute_state corresponding to
given XXX_POWER_EVENT anyway)
The sgtl5000 local ptr would be declared within common handler, which
vag_and_mute_control clearly is. Said handler declaration could be
updated to again require widget rather than component.
Cherry on top: relocation of "return 0;" directly to
vag_and_mute_control. Leaving it void (as it is), however, might also be
appropriate (explicit).
Czarek
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
