From: Shuming Fan <shumingf@xxxxxxxxxxx>
There are two issues to fix:
- DC offset calibration data will be reset after stopping playback.
- DC offset calibration data should be applied in the initial setting.
Signed-off-by: Shuming Fan <shumingf@xxxxxxxxxxx>
---
sound/soc/codecs/rt1011.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/rt1011.c b/sound/soc/codecs/rt1011.c
index 5605b660f4bf..0a6ff13d76e1 100644
--- a/sound/soc/codecs/rt1011.c
+++ b/sound/soc/codecs/rt1011.c
@@ -39,7 +39,7 @@ static const struct reg_sequence init_list[] = {
{ RT1011_POWER_9, 0xa840 },
{ RT1011_ADC_SET_5, 0x0a20 },
- { RT1011_DAC_SET_2, 0xa232 },
+ { RT1011_DAC_SET_2, 0xa032 },
{ RT1011_ADC_SET_1, 0x2925 },
{ RT1011_SPK_PRO_DC_DET_1, 0xb00c },
@@ -1917,7 +1917,7 @@ static int rt1011_set_bias_level(struct snd_soc_component *component,
snd_soc_component_write(component,
RT1011_SYSTEM_RESET_2, 0x0000);
snd_soc_component_write(component,
- RT1011_SYSTEM_RESET_3, 0x0000);
+ RT1011_SYSTEM_RESET_3, 0x0001);
snd_soc_component_write(component,
RT1011_SYSTEM_RESET_1, 0x003f);
snd_soc_component_write(component,
--
2.22.0
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
