When DSP boots with timeout error try to reload firmware
to keep best user expeirience.
Signed-off-by: Szymon Mielczarek <szymonx.mielczarek@xxxxxxxxx>
Signed-off-by: Pawel Harlozinski <pawel.harlozinski@xxxxxxxxxxxxxxx>
---
sound/soc/intel/skylake/bxt-sst.c | 17 +++++++++++------
1 file changed, 11 insertions(+), 6 deletions(-)
diff --git a/sound/soc/intel/skylake/bxt-sst.c b/sound/soc/intel/skylake/bxt-sst.c
index 440bca7afbf1..dd0260557530 100644
--- a/sound/soc/intel/skylake/bxt-sst.c
+++ b/sound/soc/intel/skylake/bxt-sst.c
@@ -455,13 +455,19 @@ static int bxt_set_dsp_D0(struct sst_dsp *ctx, unsigned int core_id)
/* If core 1 was turned on for booting core 0, turn it off */
skl_dsp_core_power_down(ctx, SKL_DSP_CORE_MASK(1));
if (ret == 0) {
- dev_err(ctx->dev, "%s: DSP boot timeout\n", __func__);
- dev_err(ctx->dev, "Error code=0x%x: FW status=0x%x\n",
+ dev_warn(ctx->dev,
+ "DSP boot timeout: Error code=0x%x: FW status=0x%x\n",
sst_dsp_shim_read(ctx, BXT_ADSP_ERROR_CODE),
sst_dsp_shim_read(ctx, BXT_ADSP_FW_STATUS));
- dev_err(ctx->dev, "Failed to set core0 to D0 state\n");
- ret = -EIO;
- goto err;
+ dev_warn(ctx->dev,"Reloading FW\n");
+
+ ret = bxt_sst_init_fw(skl->dev, skl);
+ if (ret < 0) {
+ dev_err(ctx->dev, "Reload fw failed: %d\n", ret);
+ dev_err(ctx->dev, "Failed to set core0 to D0 state\n");
+ ret = -EIO;
+ goto err;
+ }
}
}
@@ -486,7 +492,6 @@ static int bxt_set_dsp_D0(struct sst_dsp *ctx, unsigned int core_id)
if (core_id == SKL_DSP_CORE0_ID)
core_mask |= SKL_DSP_CORE_MASK(1);
skl_dsp_disable_core(ctx, core_mask);
-
return ret;
}
--
2.17.1
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
