On 26.06.2019 14:23, Mark Brown wrote: > On Wed, Jun 26, 2019 at 01:49:47PM +0300, Codrin Ciubotariu wrote: >> Since the ad193x codecs have no software reset, we have to reinitialize the >> registers after a hardware reset. For example, if we change the >> device-tree between these resets, changing the audio format of the DAI link >> from DSP_A with 8 TDM channels to I2S 2 channels, DAC Control 1 register >> will remain configured for 8 channels. This patch resets this register at >> probe to its default value. > > Would it not be more robust/complete to have a set of register defaults > and write the whole lot out rather than individually going through and > adding writes for specific registers as needed? > It would indeed. I will make two patches, one that implements what you suggested, for the registers that we touch only, and another one that will add AD193X_DAC_CTRL1 to these defaults. You can drop this patch. Thanks and best regards, Codrin _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
