Currently on each driver reload internal counter is being increased. It
causes failure to enumerate driver devices, as they have hardcoded:
.codec_name = "ehdaudio0D2",
As there is currently no devices with multiple hda codecs and there is
currently no established way to reliably differentiate, between them,
always assign bus->idx = 0;
This fixes a problem when we unload and reload machine driver idx gets
incremented, so .codec_name would've needed to be set to "ehdaudio1D2"
after first reload and so on.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@xxxxxxxxxxxxxxx>
---
sound/hda/ext/hdac_ext_bus.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/sound/hda/ext/hdac_ext_bus.c b/sound/hda/ext/hdac_ext_bus.c
index a3a113ef5d56..4f9f1d2a2ec5 100644
--- a/sound/hda/ext/hdac_ext_bus.c
+++ b/sound/hda/ext/hdac_ext_bus.c
@@ -85,7 +85,6 @@ int snd_hdac_ext_bus_init(struct hdac_bus *bus, struct device *dev,
const struct hdac_ext_bus_ops *ext_ops)
{
int ret;
- static int idx;
/* check if io ops are provided, if not load the defaults */
if (io_ops == NULL)
@@ -96,7 +95,12 @@ int snd_hdac_ext_bus_init(struct hdac_bus *bus, struct device *dev,
return ret;
bus->ext_ops = ext_ops;
- bus->idx = idx++;
+ /* FIXME:
+ * Currently only one bus is supported, if there is device with more
+ * buses, bus->idx should be greater than 0, but there needs to be a
+ * reliable way to always assign same number.
+ */
+ bus->idx = 0;
bus->cmd_dma_state = true;
return 0;
--
2.17.1
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
