On Tue, 2019-05-21 at 13:36 +0300, Oleksandr Suvorov wrote:
> If VDDA != VDDIO and any of them is greater than 3.1V, charge pump
> source can be assigned automatically.
>
> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@xxxxxxxxxxx>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@xxxxxxxxxxx>
> ---
>
> sound/soc/codecs/sgtl5000.c | 14 +++++++++-----
> 1 file changed, 9 insertions(+), 5 deletions(-)
>
> diff --git sound/soc/codecs/sgtl5000.c sound/soc/codecs/sgtl5000.c
> index e813a37910af..ee1e4bf61322 100644
> --- sound/soc/codecs/sgtl5000.c
> +++ sound/soc/codecs/sgtl5000.c
> @@ -1174,12 +1174,16 @@ static int sgtl5000_set_power_regs(struct
> snd_soc_component *component)
> SGTL5000_INT_OSC_EN);
> /* Enable VDDC charge pump */
> ana_pwr |= SGTL5000_VDDC_CHRGPMP_POWERUP;
> - } else if (vddio >= 3100 && vdda >= 3100) {
> + } else {
> ana_pwr &= ~SGTL5000_VDDC_CHRGPMP_POWERUP;
> - /* VDDC use VDDIO rail */
> - lreg_ctrl |= SGTL5000_VDDC_ASSN_OVRD;
> - lreg_ctrl |= SGTL5000_VDDC_MAN_ASSN_VDDIO <<
> - SGTL5000_VDDC_MAN_ASSN_SHIFT;
> + /* if vddio == vdda the source of charge pump should be
> + * assigned manually to VDDIO
> + */
> + if (vddio == vdda) {
> + lreg_ctrl |= SGTL5000_VDDC_ASSN_OVRD;
> + lreg_ctrl |= SGTL5000_VDDC_MAN_ASSN_VDDIO <<
> + SGTL5000_VDDC_MAN_ASSN_SHIFT;
> + }
> }
>
> snd_soc_component_write(component, SGTL5000_CHIP_LINREG_CTRL,
> lreg_ctrl);
> --
> 2.20.1
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
