Allwinner DAC seems to have a delay in the Speaker audio routing. When
playing a sound for the first time, the sound gets chopped. On a second
play the sound is played correctly. After some time (~5s) the issue gets
back.
This commit seems to be fixing the same issue as bf14da7 but
for another codepath.
This is the DTS that was used to debug the problem.
&codec {
allwinner,pa-gpios = <&r_pio 0 11 GPIO_ACTIVE_HIGH>; /* PL11 */
allwinner,audio-routing =
"Speaker", "LINEOUT";
status = "okay";
}
Signed-off-by: Georgii Staroselskii <georgii.staroselskii@xxxxxxxxx>
---
sound/soc/sunxi/sun4i-codec.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c
index f2deffe..9e1f00e 100644
--- a/sound/soc/sunxi/sun4i-codec.c
+++ b/sound/soc/sunxi/sun4i-codec.c
@@ -1320,6 +1320,15 @@ static int sun4i_codec_spk_event(struct snd_soc_dapm_widget *w,
gpiod_set_value_cansleep(scodec->gpio_pa,
!!SND_SOC_DAPM_EVENT_ON(event));
+ if (SND_SOC_DAPM_EVENT_ON(event)) {
+ /*
+ * Need a delay to wait for DAC to push the data. 700ms seems
+ * to be the best compromise not to feel this delay while
+ * playing a sound.
+ */
+ msleep(700);
+ }
+
return 0;
}
--
2.7.4
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
