Add name to component driver so it is possible to lookup the component
when needed.
Signed-off-by: Curtis Malainey <cujomalainey@xxxxxxxxxxxx>
---
sound/soc/codecs/rt5677.c | 7 ++++---
sound/soc/codecs/rt5677.h | 2 ++
2 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/sound/soc/codecs/rt5677.c b/sound/soc/codecs/rt5677.c
index 6fc70e441458..44071c7a4670 100644
--- a/sound/soc/codecs/rt5677.c
+++ b/sound/soc/codecs/rt5677.c
@@ -4650,7 +4650,7 @@ static int rt5677_to_irq(struct gpio_chip *chip, unsigned offset)
}
static const struct gpio_chip rt5677_template_chip = {
- .label = "rt5677",
+ .label = RT5677_DRV_NAME,
.owner = THIS_MODULE,
.direction_output = rt5677_gpio_direction_out,
.set = rt5677_gpio_set,
@@ -4958,6 +4958,7 @@ static struct snd_soc_dai_driver rt5677_dai[] = {
};
static const struct snd_soc_component_driver soc_component_dev_rt5677 = {
+ .name = RT5677_DRV_NAME,
.probe = rt5677_probe,
.remove = rt5677_remove,
.suspend = rt5677_suspend,
@@ -5079,7 +5080,7 @@ static struct regmap_irq rt5677_irqs[] = {
};
static struct regmap_irq_chip rt5677_irq_chip = {
- .name = "rt5677",
+ .name = RT5677_DRV_NAME,
.irqs = rt5677_irqs,
.num_irqs = ARRAY_SIZE(rt5677_irqs),
@@ -5267,7 +5268,7 @@ static int rt5677_i2c_remove(struct i2c_client *i2c)
static struct i2c_driver rt5677_i2c_driver = {
.driver = {
- .name = "rt5677",
+ .name = RT5677_DRV_NAME,
.of_match_table = rt5677_of_match,
.acpi_match_table = ACPI_PTR(rt5677_acpi_match),
},
diff --git a/sound/soc/codecs/rt5677.h b/sound/soc/codecs/rt5677.h
index 183d92b03045..11a2ffceec3b 100644
--- a/sound/soc/codecs/rt5677.h
+++ b/sound/soc/codecs/rt5677.h
@@ -1674,6 +1674,8 @@
#define RT5677_FIRMWARE1 "rt5677_dsp_fw1.bin"
#define RT5677_FIRMWARE2 "rt5677_dsp_fw2.bin"
+#define RT5677_DRV_NAME "rt5677"
+
/* System Clock Source */
enum {
RT5677_SCLK_S_MCLK,
--
2.21.0.1020.gf2820cf01a-goog
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
