Hi Nicolin,
On Sb, 2019-04-20 at 22:54 -0700, Nicolin Chen wrote:
> On Sat, Apr 20, 2019 at 03:59:05PM +0000, Daniel Baluta wrote:
> >
> > Turn off/on clocks when device enters suspend/resume. This
> > helps saving power.
> >
> > @@ -934,6 +933,25 @@ static int fsl_sai_runtime_suspend(struct device *dev)
> > static int fsl_sai_runtime_resume(struct device *dev)
> > {
> > struct fsl_sai *sai = dev_get_drvdata(dev);
> > + int ret;
> > +
> > + ret = clk_prepare_enable(sai->bus_clk);
> > + if (ret) {
> > + dev_err(dev, "failed to enable bus clock: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + if (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_PLAYBACK)) {
> > + ret = clk_prepare_enable(sai->mclk_clk[sai->mclk_id[1]]);
> > + if (ret)
> > + goto disable_bus_clk;
> > + }
> > +
> > + if (sai->mclk_streams & BIT(SNDRV_PCM_STREAM_CAPTURE)) {
> > + ret = clk_prepare_enable(sai->mclk_clk[sai->mclk_id[0]]);
> > + if (ret)
> > + goto disable_tx_clk;
> > + }
> The driver only enables mclk_clks for I2S master mode. But this
> change enables them for I2S slave mode also. It doesn't sound a
> right thing to me since we are supposed to save power?
This change does not enable them for I2S slave mode, please check "fsl_sai_hw_params"
and "fsl_sai_hw_free" functions: the field "sai->mclk_streams" is modified only for
the case when "if (!sai->is_slave_mode)";
Regards,
Viorel
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
