Hi,
I'm looking to port the sun4i-i2s drivers for Allwinner H6, but
regarding the quirks I found strange that H3 and A64 was so different.
I have analyzed the datasheet and using human reading comparison, I
have found only 3 minor differences in the registers.
H3 reference i have used : H3 Datasheet(Revision 1.0)
For A64 : A64 User Manual(Revision 1.1)
H3 is identical to A64 except H3 has new :
LRCKR_OUT bit(16) in PCM_CONTROL_REG
SDI_sync_sel Bit(31) in PCM_FMT0_REG
LRCKR_PERIOD Mask(29:20) in PCM_FMT0_REG
Regarding the quirks struct in the drivers and the commit log
sha1: 66ecce3325383c8304063e7d5a30f4374ef5a33e
ASoC: sun4i-i2s: Add compatibility with A64 codec I2S
The I2S block used for the audio codec in the A64 differs from other 3
I2S modules in A64 and isn't compatible with H3. But it is very similar
to what is found in A10(sun4i). However, its TX FIFO is
located at a different address.
It said that A64 is really different which I disagree, for me the H3
use the same IP as A64 with a little improvement.
Which seems logical because "The A64 is basically an Allwinner H3 with
the Cortex-A7 cores replaced with Cortex-A53 cores" (source
linux-sunxi.org)
I'm okay to send a patch to fix that but I don't have an H3 nor A64 to
test the modification.
Thanks,
Clement
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
