When we want to support more sample rate, for example 12kHz/24kHz
we need update the process_option table, if we want to support more
sample rate next time, the table need to be updated again. which
is not flexible.
We got a function fsl_asrc_sel_proc to replace the table, which can
give the pre-processing and post-processing options according to
the sample rate.
Signed-off-by: Shengjiu Wang <shengjiu.wang@xxxxxxx>
---
sound/soc/fsl/fsl_asrc.c | 78 +++++++++++++++++++++++++++++++++++-------------
1 file changed, 58 insertions(+), 20 deletions(-)
diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
index 0b937924d2e4..d34d539d01f2 100644
--- a/sound/soc/fsl/fsl_asrc.c
+++ b/sound/soc/fsl/fsl_asrc.c
@@ -26,24 +26,6 @@
#define pair_dbg(fmt, ...) \
dev_dbg(&asrc_priv->pdev->dev, "Pair %c: " fmt, 'A' + index, ##__VA_ARGS__)
-/* Sample rates are aligned with that defined in pcm.h file */
-static const u8 process_option[][12][2] = {
- /* 8kHz 11.025kHz 16kHz 22.05kHz 32kHz 44.1kHz 48kHz 64kHz 88.2kHz 96kHz 176kHz 192kHz */
- {{0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 5512Hz */
- {{0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 8kHz */
- {{0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 11025Hz */
- {{1, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 16kHz */
- {{1, 2}, {1, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0}, {0, 0}, {0, 0},}, /* 22050Hz */
- {{1, 2}, {2, 1}, {2, 1}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0}, {0, 0},}, /* 32kHz */
- {{2, 2}, {2, 2}, {2, 1}, {2, 1}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0},}, /* 44.1kHz */
- {{2, 2}, {2, 2}, {2, 1}, {2, 1}, {0, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0}, {0, 0},}, /* 48kHz */
- {{2, 2}, {2, 2}, {2, 2}, {2, 1}, {1, 2}, {0, 2}, {0, 2}, {0, 1}, {0, 1}, {0, 1}, {0, 1}, {0, 0},}, /* 64kHz */
- {{2, 2}, {2, 2}, {2, 2}, {2, 2}, {1, 2}, {1, 2}, {1, 2}, {1, 1}, {1, 1}, {1, 1}, {1, 1}, {1, 1},}, /* 88.2kHz */
- {{2, 2}, {2, 2}, {2, 2}, {2, 2}, {1, 2}, {1, 2}, {1, 2}, {1, 1}, {1, 1}, {1, 1}, {1, 1}, {1, 1},}, /* 96kHz */
- {{2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 1}, {2, 1}, {2, 1}, {2, 1}, {2, 1},}, /* 176kHz */
- {{2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 2}, {2, 1}, {2, 1}, {2, 1}, {2, 1}, {2, 1},}, /* 192kHz */
-};
-
/* Corresponding to process_option */
static int supported_input_rate[] = {
5512, 8000, 11025, 16000, 22050, 32000, 44100, 48000, 64000, 88200,
@@ -80,6 +62,54 @@
static unsigned char *clk_map[2];
/**
+ * Select the pre-processing and post-processing options
+ *
+ * inrate: input sample rate
+ * outrate: output sample rate
+ * pre_proc: return value for pre-processing option
+ * post_proc: return value for post-processing option
+ */
+static int fsl_asrc_sel_proc(int inrate, int outrate, int *pre_proc,
+ int *post_proc)
+{
+ bool post_proc_cond2;
+ bool post_proc_cond0;
+
+ /* Does not support cases: Tsout > 8.125 * Tsin */
+ if (inrate * 8 > 65 * outrate)
+ return -EINVAL;
+
+ /* Otherwise, select pre_proc between [0, 2] */
+ if (inrate * 8 > 33 * outrate)
+ *pre_proc = 2;
+ else if (inrate * 8 > 15 * outrate) {
+ if (inrate > 152000)
+ *pre_proc = 2;
+ else
+ *pre_proc = 1;
+ } else if (inrate < 76000)
+ *pre_proc = 0;
+ else if (inrate > 152000)
+ *pre_proc = 2;
+ else
+ *pre_proc = 1;
+
+ /* Condition for selection of post-processing */
+ post_proc_cond2 = (inrate * 15 > outrate * 16 && outrate < 56000) ||
+ (inrate > 56000 && outrate < 56000);
+ post_proc_cond0 = inrate * 23 < outrate * 8;
+
+ if (post_proc_cond2)
+ *post_proc = 2;
+ else if (post_proc_cond0)
+ *post_proc = 0;
+ else
+ *post_proc = 1;
+
+ return 0;
+}
+
+/**
* Request ASRC pair
*
* It assigns pair by the order of A->C->B because allocation of pair B,
@@ -239,8 +269,10 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair)
u32 inrate, outrate, indiv, outdiv;
u32 clk_index[2], div[2];
int in, out, channels;
+ int pre_proc, post_proc;
struct clk *clk;
bool ideal;
+ int ret;
if (!config) {
pair_err("invalid pair config\n");
@@ -289,6 +321,12 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair)
return -EINVAL;
}
+ ret = fsl_asrc_sel_proc(inrate, outrate, &pre_proc, &post_proc);
+ if (ret) {
+ pair_err("No supported pre-processing options\n");
+ return ret;
+ }
+
/* Validate input and output clock sources */
clk_index[IN] = clk_map[IN][config->inclk];
clk_index[OUT] = clk_map[OUT][config->outclk];
@@ -380,8 +418,8 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair)
/* Apply configurations for pre- and post-processing */
regmap_update_bits(asrc_priv->regmap, REG_ASRCFG,
ASRCFG_PREMODi_MASK(index) | ASRCFG_POSTMODi_MASK(index),
- ASRCFG_PREMOD(index, process_option[in][out][0]) |
- ASRCFG_POSTMOD(index, process_option[in][out][1]));
+ ASRCFG_PREMOD(index, pre_proc) |
+ ASRCFG_POSTMOD(index, post_proc));
return fsl_asrc_set_ideal_ratio(pair, inrate, outrate);
}
--
1.9.1
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
