The rt5677 driver is using the wrong property names to read from ACPI.
Update the property names to match those from _DSD, so that the correct
GPIO pin numbers are read and that plug-detection works.
With this patch, plugging and unplugging the headphone jack switches
between headphones and speakers automatically.
Signed-off-by: Fletcher Woodruff <fletcherw@xxxxxxxxxxxx>
---
sound/soc/codecs/rt5677.c | 27 ++++++---------------------
1 file changed, 6 insertions(+), 21 deletions(-)
diff --git a/sound/soc/codecs/rt5677.c b/sound/soc/codecs/rt5677.c
index 33380f82b7008f..1f725086cee39c 100644
--- a/sound/soc/codecs/rt5677.c
+++ b/sound/soc/codecs/rt5677.c
@@ -4998,25 +4998,6 @@ static const struct acpi_device_id rt5677_acpi_match[] = {
};
MODULE_DEVICE_TABLE(acpi, rt5677_acpi_match);
-static void rt5677_read_acpi_properties(struct rt5677_priv *rt5677,
- struct device *dev)
-{
- u32 val;
-
- if (!device_property_read_u32(dev, "DCLK", &val))
- rt5677->pdata.dmic2_clk_pin = val;
-
- rt5677->pdata.in1_diff = device_property_read_bool(dev, "IN1");
- rt5677->pdata.in2_diff = device_property_read_bool(dev, "IN2");
- rt5677->pdata.lout1_diff = device_property_read_bool(dev, "OUT1");
- rt5677->pdata.lout2_diff = device_property_read_bool(dev, "OUT2");
- rt5677->pdata.lout3_diff = device_property_read_bool(dev, "OUT3");
-
- device_property_read_u32(dev, "JD1", &rt5677->pdata.jd1_gpio);
- device_property_read_u32(dev, "JD2", &rt5677->pdata.jd2_gpio);
- device_property_read_u32(dev, "JD3", &rt5677->pdata.jd3_gpio);
-}
-
static void rt5677_read_device_properties(struct rt5677_priv *rt5677,
struct device *dev)
{
@@ -5273,19 +5254,23 @@ static int rt5677_i2c_probe(struct i2c_client *i2c)
if (match_id)
rt5677->type = (enum rt5677_type)match_id->data;
- rt5677_read_device_properties(rt5677, &i2c->dev);
} else if (ACPI_HANDLE(&i2c->dev)) {
const struct acpi_device_id *acpi_id;
+ u32 val;
acpi_id = acpi_match_device(rt5677_acpi_match, &i2c->dev);
if (acpi_id)
rt5677->type = (enum rt5677_type)acpi_id->driver_data;
- rt5677_read_acpi_properties(rt5677, &i2c->dev);
+ if (!device_property_read_u32(&i2c->dev,
+ "realtek,dmic2_clk_pin", &val))
+ rt5677->pdata.dmic2_clk_pin = val;
} else {
return -EINVAL;
}
+ rt5677_read_device_properties(rt5677, &i2c->dev);
+
/* pow-ldo2 and reset are optional. The codec pins may be statically
* connected on the board without gpios. If the gpio device property
* isn't specified, devm_gpiod_get_optional returns NULL.
--
2.21.0.392.gf8f6787159e-goog
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
