Add a switch for setting common mode voltage. This can allow
for higher drive levels on the amplifier outputs.
Signed-off-by: Annaliese McDermond <nh6z@xxxxxxxx>
---
sound/soc/codecs/tlv320aic32x4.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/sound/soc/codecs/tlv320aic32x4.c b/sound/soc/codecs/tlv320aic32x4.c
index aec86fd6ac15..77df2cbdf5f4 100644
--- a/sound/soc/codecs/tlv320aic32x4.c
+++ b/sound/soc/codecs/tlv320aic32x4.c
@@ -242,6 +242,12 @@ static DECLARE_TLV_DB_SCALE(tlv_driver_gain, -600, 100, 0);
/* -12dB min, 0.5dB steps */
static DECLARE_TLV_DB_SCALE(tlv_adc_vol, -1200, 50, 0);
+static const char * const lo_cm_text[] = {
+ "Full Chip", "1.65V",
+};
+
+static SOC_ENUM_SINGLE_DECL(lo_cm_enum, AIC32X4_CMMODE, 3, lo_cm_text);
+
static const struct snd_kcontrol_new aic32x4_snd_controls[] = {
SOC_DOUBLE_R_S_TLV("PCM Playback Volume", AIC32X4_LDACVOL,
AIC32X4_RDACVOL, 0, -0x7f, 0x30, 7, 0, tlv_pcm),
@@ -255,6 +261,7 @@ static const struct snd_kcontrol_new aic32x4_snd_controls[] = {
AIC32X4_HPRGAIN, 6, 0x01, 1),
SOC_DOUBLE_R("LO DAC Playback Switch", AIC32X4_LOLGAIN,
AIC32X4_LORGAIN, 6, 0x01, 1),
+ SOC_ENUM("LO Playback Common Mode Switch", lo_cm_enum),
SOC_DOUBLE_R("Mic PGA Switch", AIC32X4_LMICPGAVOL,
AIC32X4_RMICPGAVOL, 7, 0x01, 1),
--
2.19.1
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
