The current tlv320aic32x4 code sets the various clock parameters by
looking in a static table in the kernel. This works well enough,
but it has a few disadvantages.
1) If the master clock doesn't match one of the precalculated values
the driver cannot work. This could be because the designer
decided to use a different crystal, or because the clock comes
from a PLL that can't quite achieve the proper frequency
exactly.
2) The driver only supports certain pre-calculated sample rates.
The actual hardware can support many more. These changes
enable those rates. Additionally, certain sample rates at
certain clock rates were previously unavailable as
combinations.
This patch dynamically calculates the various PLL and divider
values to find something that works.
Additionally, to enable much of this, the clock tree is
modeled as a part of the Common Clock Framework. This allows
for easier debugigng as you can use the standard tools such as
/sys/kernel/debug/clk/clk_summary. It also simplifies enabling
the entirety of the clock tree needed, and makes sure unused
clocks become disabled.
These patches have been tested and are working on a Raspberry Pi
with the simplecard driver.
Changes in v2:
- Update 0002 patch to change Kconfig to add dependency on CCF
- Update 0002 patch to correct the SPDX identifier
- Update 0002 patch to use EXPORT_SYMBOL_GPL() instead of
EXPORT_SYMBOL()
- Update patches 0002, 0004 and 0005 to use prepare/unprepare
instead of enable/disable since the i2c operations are not
atomic
- Update 0004 patch to fix indentation in commit message
- Drop patch 0009 because it is a duplicate of the already
committed patch in 667e9334
- Update 0019 patch to keep aic32x4_set_dai_sysclk but to have
it use clk_set_rate to set the master clock rate
Changes in v3:
- Rebase on current for-next
- Move "Properly Set Processing Blocks" to the start of the
patches so that it can potentially be applied as a bug
fix
Changes in v4:
- Rabase on current for-next
- Regenerate patches to get them to apply correctly.
Verified with git-am on for-next and they appear
to work here.
Annaliese McDermond (10):
ASoC: tlv320aic32x4: Model PLL in CCF
ASoC: tlv320aic32x4: Model CODEC_CLKIN in CCF
ASoC: tlv320aic32x4: Model DAC/ADC dividers in CCF
ASoC: tlv320aic32x4: Model BDIV divider in CCF
ASoC: tlv320aic32x4: Control clock gating with CCF
ASoC: tlv320aic32x4: Move aosr and dosr setting to separate functions
ASoC: tlv320aic32x4: Dynamically Determine Clocking
ASoC: tlv320aic32x4: Restructure set_dai_sysclk
ASoC: tlv320aic32x4: Remove mclk references
ASoC: tlv320aic32x4: Allow 192000 Sample Rate
sound/soc/codecs/Kconfig | 1 +
sound/soc/codecs/Makefile | 2 +-
sound/soc/codecs/tlv320aic32x4-clk.c | 483 +++++++++++++++++++++++++++
sound/soc/codecs/tlv320aic32x4.c | 427 +++++++++++------------
sound/soc/codecs/tlv320aic32x4.h | 11 +
5 files changed, 692 insertions(+), 232 deletions(-)
create mode 100644 sound/soc/codecs/tlv320aic32x4-clk.c
--
2.19.1
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
