From: Liam Girdwood <liam.r.girdwood@xxxxxxxxxxxxxxx>
Add HDA specific IPC mechanism for Intel DSP HW.
Signed-off-by: Keyon Jie <yang.jie@xxxxxxxxxxxxxxx>
Signed-off-by: Liam Girdwood <liam.r.girdwood@xxxxxxxxxxxxxxx>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
---
sound/soc/sof/intel/hda-ipc.c | 402 ++++++++++++++++++++++++++++++++++
1 file changed, 402 insertions(+)
create mode 100644 sound/soc/sof/intel/hda-ipc.c
diff --git a/sound/soc/sof/intel/hda-ipc.c b/sound/soc/sof/intel/hda-ipc.c
new file mode 100644
index 000000000000..4d978666db5a
--- /dev/null
+++ b/sound/soc/sof/intel/hda-ipc.c
@@ -0,0 +1,402 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+//
+// This file is provided under a dual BSD/GPLv2 license. When using or
+// redistributing this file, you may do so under either license.
+//
+// Copyright(c) 2018 Intel Corporation. All rights reserved.
+//
+// Authors: Liam Girdwood <liam.r.girdwood@xxxxxxxxxxxxxxx>
+// Ranjani Sridharan <ranjani.sridharan@xxxxxxxxxxxxxxx>
+// Rander Wang <rander.wang@xxxxxxxxx>
+// Keyon Jie <yang.jie@xxxxxxxxxxxxxxx>
+//
+
+/*
+ * Hardware interface for generic Intel audio DSP HDA IP
+ */
+
+#include "../ops.h"
+#include "hda.h"
+
+int hda_dsp_ipc_cmd_done(struct snd_sof_dev *sdev, int dir)
+{
+ if (dir == SOF_IPC_HOST_REPLY) {
+ /*
+ * tell DSP cmd is done - clear busy
+ * interrupt and send reply msg to dsp
+ */
+ snd_sof_dsp_update_bits_forced(sdev, HDA_DSP_BAR,
+ HDA_DSP_REG_HIPCT,
+ HDA_DSP_REG_HIPCT_BUSY,
+ HDA_DSP_REG_HIPCT_BUSY);
+
+ /* unmask BUSY interrupt */
+ snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR,
+ HDA_DSP_REG_HIPCCTL,
+ HDA_DSP_REG_HIPCCTL_BUSY,
+ HDA_DSP_REG_HIPCCTL_BUSY);
+ } else {
+ /*
+ * set DONE bit - tell DSP we have received the reply msg
+ * from DSP, and processed it, don't send more reply to host
+ */
+ snd_sof_dsp_update_bits_forced(sdev, HDA_DSP_BAR,
+ HDA_DSP_REG_HIPCIE,
+ HDA_DSP_REG_HIPCIE_DONE,
+ HDA_DSP_REG_HIPCIE_DONE);
+
+ /* unmask Done interrupt */
+ snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR,
+ HDA_DSP_REG_HIPCCTL,
+ HDA_DSP_REG_HIPCCTL_DONE,
+ HDA_DSP_REG_HIPCCTL_DONE);
+ }
+
+ return 0;
+}
+
+int hda_dsp_ipc_send_msg(struct snd_sof_dev *sdev, struct snd_sof_ipc_msg *msg)
+{
+ u32 cmd = msg->header;
+
+ /* send IPC message to DSP */
+ sof_mailbox_write(sdev, sdev->host_box.offset, msg->msg_data,
+ msg->msg_size);
+ snd_sof_dsp_write(sdev, HDA_DSP_BAR, HDA_DSP_REG_HIPCI,
+ cmd | HDA_DSP_REG_HIPCI_BUSY);
+
+ return 0;
+}
+
+int hda_dsp_ipc_get_reply(struct snd_sof_dev *sdev,
+ struct snd_sof_ipc_msg *msg)
+{
+ struct sof_ipc_reply reply;
+ struct sof_ipc_cmd_hdr *hdr;
+ int ret = 0;
+ u32 size;
+
+ hdr = msg->msg_data;
+ if (hdr->cmd == (SOF_IPC_GLB_PM_MSG | SOF_IPC_PM_CTX_SAVE)) {
+ /*
+ * memory windows are powered off before sending IPC reply,
+ * so we can't read the mailbox for CTX_SAVE reply.
+ */
+ reply.error = 0;
+ reply.hdr.cmd = SOF_IPC_GLB_REPLY;
+ reply.hdr.size = sizeof(reply);
+ } else {
+ /* get IPC reply from DSP in the mailbox */
+ sof_mailbox_read(sdev, sdev->host_box.offset, &reply,
+ sizeof(reply));
+ }
+ if (reply.error < 0) {
+ size = sizeof(reply);
+ ret = reply.error;
+ } else {
+ /* reply correct size ? */
+ if (reply.hdr.size != msg->reply_size) {
+ dev_err(sdev->dev, "error: reply expected 0x%zx got 0x%x bytes\n",
+ msg->reply_size, reply.hdr.size);
+ size = msg->reply_size;
+ ret = -EINVAL;
+ } else {
+ size = reply.hdr.size;
+ }
+ }
+
+ /* read the message */
+ if (msg->msg_data && size > 0)
+ sof_mailbox_read(sdev, sdev->host_box.offset,
+ msg->reply_data, size);
+
+ return ret;
+}
+
+/* IPC handler thread */
+irqreturn_t hda_dsp_ipc_irq_thread(int irq, void *context)
+{
+ struct snd_sof_dev *sdev = (struct snd_sof_dev *)context;
+ u32 hipci;
+ u32 hipcie;
+ u32 hipct;
+ u32 hipcte;
+ u32 hipcctl;
+ u32 msg;
+ u32 msg_ext;
+ irqreturn_t ret = IRQ_NONE;
+ int reply = -EINVAL;
+
+ /* here we handle IPC interrupts only */
+ if (!(sdev->irq_status & HDA_DSP_ADSPIS_IPC))
+ return ret;
+
+ /* read IPC status */
+ hipcie = snd_sof_dsp_read(sdev, HDA_DSP_BAR,
+ HDA_DSP_REG_HIPCIE);
+ hipct = snd_sof_dsp_read(sdev, HDA_DSP_BAR, HDA_DSP_REG_HIPCT);
+ hipcctl = snd_sof_dsp_read(sdev, HDA_DSP_BAR, HDA_DSP_REG_HIPCCTL);
+
+ /* is this a reply message from the DSP */
+ if (hipcie & HDA_DSP_REG_HIPCIE_DONE &&
+ hipcctl & HDA_DSP_REG_HIPCCTL_DONE) {
+
+ hipci = snd_sof_dsp_read(sdev, HDA_DSP_BAR,
+ HDA_DSP_REG_HIPCI);
+ msg = hipci & HDA_DSP_REG_HIPCI_MSG_MASK;
+ msg_ext = hipcie & HDA_DSP_REG_HIPCIE_MSG_MASK;
+
+ dev_vdbg(sdev->dev,
+ "ipc: firmware response, msg:0x%x, msg_ext:0x%x\n",
+ msg, msg_ext);
+
+ /* mask Done interrupt */
+ snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR,
+ HDA_DSP_REG_HIPCCTL,
+ HDA_DSP_REG_HIPCCTL_DONE, 0);
+
+ /* handle immediate reply from DSP core - ignore ROM messages */
+ if (msg != 0x1004000)
+ reply = snd_sof_ipc_reply(sdev, msg);
+
+ /*
+ * handle immediate reply from DSP core. If the msg is
+ * found, set done bit in cmd_done which is called at the
+ * end of message processing function, else set it here
+ * because the done bit can't be set in cmd_done function
+ * which is triggered by msg
+ */
+ if (reply)
+ hda_dsp_ipc_cmd_done(sdev, SOF_IPC_DSP_REPLY);
+
+ ret = IRQ_HANDLED;
+ }
+
+ /* is this a new message from DSP */
+ if (hipct & HDA_DSP_REG_HIPCT_BUSY &&
+ hipcctl & HDA_DSP_REG_HIPCCTL_BUSY) {
+
+ hipcte = snd_sof_dsp_read(sdev, HDA_DSP_BAR,
+ HDA_DSP_REG_HIPCTE);
+ msg = hipct & HDA_DSP_REG_HIPCT_MSG_MASK;
+ msg_ext = hipcte & HDA_DSP_REG_HIPCTE_MSG_MASK;
+
+ dev_vdbg(sdev->dev,
+ "ipc: firmware initiated, msg:0x%x, msg_ext:0x%x\n",
+ msg, msg_ext);
+
+ /* mask BUSY interrupt */
+ snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR,
+ HDA_DSP_REG_HIPCCTL,
+ HDA_DSP_REG_HIPCCTL_BUSY, 0);
+
+ /* handle messages from DSP */
+ if ((hipct & SOF_IPC_PANIC_MAGIC_MASK) == SOF_IPC_PANIC_MAGIC) {
+ /* this is a PANIC message !! */
+ snd_sof_dsp_panic(sdev, HDA_DSP_PANIC_OFFSET(msg_ext));
+ } else {
+ /* normal message - process normally*/
+ snd_sof_ipc_msgs_rx(sdev);
+ }
+
+ ret = IRQ_HANDLED;
+ }
+
+ if (ret == IRQ_HANDLED) {
+ /* reenable IPC interrupt */
+ snd_sof_dsp_update_bits(sdev, HDA_DSP_BAR, HDA_DSP_REG_ADSPIC,
+ HDA_DSP_ADSPIC_IPC, HDA_DSP_ADSPIC_IPC);
+ }
+
+ /* wake up sleeper if we are loading code */
+ if (sdev->code_loading) {
+ sdev->code_loading = 0;
+ wake_up(&sdev->waitq);
+ }
+
+ return ret;
+}
+
+/* is this IRQ for ADSP ? - we only care about IPC here */
+irqreturn_t hda_dsp_ipc_irq_handler(int irq, void *context)
+{
+ struct snd_sof_dev *sdev = (struct snd_sof_dev *)context;
+ int ret = IRQ_NONE;
+
+ spin_lock(&sdev->hw_lock);
+
+ /* store status */
+ sdev->irq_status = snd_sof_dsp_read(sdev, HDA_DSP_BAR,
+ HDA_DSP_REG_ADSPIS);
+
+ /* invalid message ? */
+ if (sdev->irq_status == 0xffffffff)
+ goto out;
+
+ /* IPC message ? */
+ if (sdev->irq_status & HDA_DSP_ADSPIS_IPC) {
+ /* disable IPC interrupt */
+ snd_sof_dsp_update_bits_unlocked(sdev, HDA_DSP_BAR,
+ HDA_DSP_REG_ADSPIC,
+ HDA_DSP_ADSPIC_IPC, 0);
+ ret = IRQ_WAKE_THREAD;
+ }
+
+out:
+ spin_unlock(&sdev->hw_lock);
+ return ret;
+}
+
+/*
+ * IPC Firmware ready.
+ */
+
+static void ipc_get_windows(struct snd_sof_dev *sdev)
+{
+ struct sof_ipc_window_elem *elem;
+ u32 outbox_offset = 0;
+ u32 stream_offset = 0;
+ u32 inbox_offset = 0;
+ u32 outbox_size = 0;
+ u32 stream_size = 0;
+ u32 inbox_size = 0;
+ int i;
+
+ if (!sdev->info_window) {
+ dev_err(sdev->dev, "error: have no window info\n");
+ return;
+ }
+
+ for (i = 0; i < sdev->info_window->num_windows; i++) {
+ elem = &sdev->info_window->window[i];
+
+ switch (elem->type) {
+ case SOF_IPC_REGION_UPBOX:
+ inbox_offset =
+ elem->offset + SRAM_WINDOW_OFFSET(elem->id);
+ inbox_size = elem->size;
+ snd_sof_debugfs_io_item(sdev,
+ sdev->bar[HDA_DSP_BAR] +
+ inbox_offset,
+ elem->size, "inbox",
+ SOF_DEBUGFS_ACCESS_D0_ONLY);
+ break;
+ case SOF_IPC_REGION_DOWNBOX:
+ outbox_offset =
+ elem->offset + SRAM_WINDOW_OFFSET(elem->id);
+ outbox_size = elem->size;
+ snd_sof_debugfs_io_item(sdev,
+ sdev->bar[HDA_DSP_BAR] +
+ outbox_offset,
+ elem->size, "outbox",
+ SOF_DEBUGFS_ACCESS_D0_ONLY);
+ break;
+ case SOF_IPC_REGION_TRACE:
+ snd_sof_debugfs_io_item(sdev,
+ sdev->bar[HDA_DSP_BAR] +
+ elem->offset +
+ SRAM_WINDOW_OFFSET
+ (elem->id),
+ elem->size, "etrace",
+ SOF_DEBUGFS_ACCESS_D0_ONLY);
+ break;
+ case SOF_IPC_REGION_DEBUG:
+ snd_sof_debugfs_io_item(sdev,
+ sdev->bar[HDA_DSP_BAR] +
+ elem->offset +
+ SRAM_WINDOW_OFFSET
+ (elem->id),
+ elem->size, "debug",
+ SOF_DEBUGFS_ACCESS_D0_ONLY);
+ break;
+ case SOF_IPC_REGION_STREAM:
+ stream_offset =
+ elem->offset + SRAM_WINDOW_OFFSET(elem->id);
+ stream_size = elem->size;
+ snd_sof_debugfs_io_item(sdev,
+ sdev->bar[HDA_DSP_BAR] +
+ elem->offset +
+ SRAM_WINDOW_OFFSET
+ (elem->id),
+ elem->size, "stream",
+ SOF_DEBUGFS_ACCESS_D0_ONLY);
+ break;
+ case SOF_IPC_REGION_REGS:
+ snd_sof_debugfs_io_item(sdev,
+ sdev->bar[HDA_DSP_BAR] +
+ elem->offset +
+ SRAM_WINDOW_OFFSET
+ (elem->id),
+ elem->size, "regs",
+ SOF_DEBUGFS_ACCESS_D0_ONLY);
+ break;
+ case SOF_IPC_REGION_EXCEPTION:
+ sdev->dsp_oops_offset = elem->offset +
+ SRAM_WINDOW_OFFSET(elem->id);
+ snd_sof_debugfs_io_item(sdev,
+ sdev->bar[HDA_DSP_BAR] +
+ elem->offset +
+ SRAM_WINDOW_OFFSET
+ (elem->id),
+ elem->size, "exception",
+ SOF_DEBUGFS_ACCESS_D0_ONLY);
+ break;
+ default:
+ dev_err(sdev->dev, "error: get illegal window info\n");
+ return;
+ }
+ }
+
+ if (outbox_size == 0 || inbox_size == 0) {
+ dev_err(sdev->dev, "error: get illegal mailbox window\n");
+ return;
+ }
+
+ snd_sof_dsp_mailbox_init(sdev, inbox_offset, inbox_size,
+ outbox_offset, outbox_size);
+ sdev->stream_box.offset = stream_offset;
+ sdev->stream_box.size = stream_size;
+
+ dev_dbg(sdev->dev, " mailbox upstream 0x%x - size 0x%x\n",
+ inbox_offset, inbox_size);
+ dev_dbg(sdev->dev, " mailbox downstream 0x%x - size 0x%x\n",
+ outbox_offset, outbox_size);
+ dev_dbg(sdev->dev, " stream region 0x%x - size 0x%x\n",
+ stream_offset, stream_size);
+}
+
+/* check for ABI compatibility and create memory windows on first boot */
+int hda_dsp_ipc_fw_ready(struct snd_sof_dev *sdev, u32 msg_id)
+{
+ struct sof_ipc_fw_ready *fw_ready = &sdev->fw_ready;
+ u32 offset;
+ int ret;
+
+ /* mailbox must be on 4k boundary */
+ offset = HDA_DSP_MBOX_UPLINK_OFFSET;
+
+ dev_dbg(sdev->dev, "ipc: DSP is ready 0x%8.8x offset 0x%x\n",
+ msg_id, offset);
+
+ /* no need to re-check version/ABI for subsequent boots */
+ if (!sdev->first_boot)
+ return 0;
+
+ /* copy data from the DSP FW ready offset */
+ sof_block_read(sdev, sdev->mmio_bar, offset, fw_ready,
+ sizeof(*fw_ready));
+
+ /* make sure ABI version is compatible */
+ ret = snd_sof_ipc_valid(sdev);
+ if (ret < 0)
+ return ret;
+
+ /* now check for extended data */
+ snd_sof_fw_parse_ext_data(sdev, sdev->mmio_bar,
+ HDA_DSP_MBOX_UPLINK_OFFSET +
+ sizeof(struct sof_ipc_fw_ready));
+
+ ipc_get_windows(sdev);
+
+ return 0;
+}
--
2.17.1
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
