Use alsa snd_pcm_hw_constraint_single service to manage
channels restriction. This provides better status on driver
limitations, to the application.
Signed-off-by: Olivier Moysan <olivier.moysan@xxxxxx>
---
sound/soc/stm/stm32_i2s.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/sound/soc/stm/stm32_i2s.c b/sound/soc/stm/stm32_i2s.c
index 783b33497435..06bbbef74b3a 100644
--- a/sound/soc/stm/stm32_i2s.c
+++ b/sound/soc/stm/stm32_i2s.c
@@ -496,12 +496,6 @@ static int stm32_i2s_configure(struct snd_soc_dai *cpu_dai,
unsigned int fthlv;
int ret;
- if ((params_channels(params) == 1) &&
- ((i2s->fmt & SND_SOC_DAIFMT_FORMAT_MASK) != SND_SOC_DAIFMT_DSP_A)) {
- dev_err(cpu_dai->dev, "Mono mode supported only by DSP_A\n");
- return -EINVAL;
- }
-
switch (format) {
case 16:
cfgr = I2S_CGFR_DATLEN_SET(I2S_I2SMOD_DATLEN_16);
@@ -551,6 +545,10 @@ static int stm32_i2s_startup(struct snd_pcm_substream *substream,
i2s->substream = substream;
spin_unlock_irqrestore(&i2s->irq_lock, flags);
+ if ((i2s->fmt & SND_SOC_DAIFMT_FORMAT_MASK) != SND_SOC_DAIFMT_DSP_A)
+ snd_pcm_hw_constraint_single(substream->runtime,
+ SNDRV_PCM_HW_PARAM_CHANNELS, 2);
+
ret = clk_prepare_enable(i2s->i2sclk);
if (ret < 0) {
dev_err(cpu_dai->dev, "Failed to enable clock: %d\n", ret);
--
2.7.4
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
