The patch ASoC: stm32: sai: fix oversampling mode has been applied to the asoc tree at https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 71d9537fada47762a1a1b33a8a1f95a92d7edc11 Mon Sep 17 00:00:00 2001 From: Olivier Moysan <olivier.moysan@xxxxxx> Date: Thu, 28 Feb 2019 14:19:24 +0100 Subject: [PATCH] ASoC: stm32: sai: fix oversampling mode Set OSR bit if mclk/fs ratio is 512. Signed-off-by: Olivier Moysan <olivier.moysan@xxxxxx> Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> --- sound/soc/stm/stm32_sai_sub.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/sound/soc/stm/stm32_sai_sub.c b/sound/soc/stm/stm32_sai_sub.c index cad415e03b5e..cb658463ccd1 100644 --- a/sound/soc/stm/stm32_sai_sub.c +++ b/sound/soc/stm/stm32_sai_sub.c @@ -913,7 +913,7 @@ static int stm32_sai_configure_clock(struct snd_soc_dai *cpu_dai, struct snd_pcm_hw_params *params) { struct stm32_sai_sub_data *sai = snd_soc_dai_get_drvdata(cpu_dai); - int div = 0; + int div = 0, cr1 = 0; int sai_clk_rate, mclk_ratio, den; unsigned int rate = params_rate(params); @@ -958,13 +958,19 @@ static int stm32_sai_configure_clock(struct snd_soc_dai *cpu_dai, } else { if (sai->mclk_rate) { mclk_ratio = sai->mclk_rate / rate; - if ((mclk_ratio != 512) && - (mclk_ratio != 256)) { + if (mclk_ratio == 512) { + cr1 = SAI_XCR1_OSR; + } else if (mclk_ratio != 256) { dev_err(cpu_dai->dev, "Wrong mclk ratio %d\n", mclk_ratio); return -EINVAL; } + + regmap_update_bits(sai->regmap, + STM_SAI_CR1_REGX, + SAI_XCR1_OSR, cr1); + div = stm32_sai_get_clk_div(sai, sai_clk_rate, sai->mclk_rate); if (div < 0) -- 2.20.1 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
