Re: WM8510 on i.MX6

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jukka,

thanks a lot for your response. Good to know about this issue and that 
there are some other users of WM8510 out there.

Unfortunately, for me your patch didn't make any difference. I still 
don't get sound. Probably there is still something else I'm missing, 
maybe on the SoC side.

The mclk to the codec is ok and I double checked all my devicetree 
settings, but still no luck.

Thanks,
Frieder

On 28.02.19 16:59, Hynninen Jukka wrote:
> Hello Frieder,
> 
> Perhaps this is because simple-card does not have capability of configuring WM8510 codec PLL and clock divisors? See this thread I started few years back:
> https://mailman.alsa-project.org/pipermail/alsa-devel/2017-September/125767.html
> 
> We ended up patching those three lines into WM8510 codec driver. We would still be interested to implement this missing link in a proper, generic manner, if we could just figure out what would be the correct place to do it.
> 
> 
> -Jukka
> 
> -----Original Message-----
> From: Alsa-devel <alsa-devel-bounces@xxxxxxxxxxxxxxxx> On Behalf Of Schrempf Frieder
> Sent: torstai 28. helmikuuta 2019 10.54
> To: alsa-devel@xxxxxxxxxxxxxxxx
> Subject: [SUSPICIOUS MESSAGE]  WM8510 on i.MX6
> 
> Hi,
> 
> I have a board with i.MX6 and a WM8510 codec and I can play audio using an old vendor kernel (3.14) and my own asoc machine driver [1].
> 
> Now I want to run this with something more recent (currently trying on
> 4.14) and upstream drivers like simple-card or fsl-asoc-card.
> 
> The problem is I'm only getting a little bit of noise from the speakers but nothing more.
> 
> I would really appreciate it if someone more knowledgeable could have a quick look and maybe come up with some ideas how I can proceed debugging.
> 
> Thanks,
> Frieder
> 
> [1] https://secure-web.cisco.com/1cEfWyuVF6-7tLBWcKcbV4q0wrmACgHA_c9qGq80VjziKKNT0jnOKl9HA7OiERigQZfZD9ylmZbHLXBpqXY90df-3pn3jr9BZepFQr83kRgawT4YcvpK2Rmd6kYx4UWXf3hIVZL3e-02lOxOrdYVI7GImecIacQ_2Gx2kb2G5XGXn9Xi9GS6M2V65XAjXYVTKFXao-2ySBapmt-qp4gKhBcNU_ehcsvW2s-arYmJFcStxcYBhoZCOp1SRT5961IeekyuBbWMmPetZ-BEc0pPE8uCFBjba4fWe0qfsyNEebgIMprRM72T9rqDsDrYRunRf5oO1y21_SiuSkvvTo0sQQMlKDH00GI54BcXvqaLnSRXM2Zfwun-9A3ZmAKa00mxy/https%3A%2F%2Fpaste.ee%2Fp%2FVuZbg
> 
> My devicetree setup for the simple-card approach looks like this:
> 
> sound {
> 	compatible = "simple-audio-card";
> 	simple-audio-card,name = "wm8510-audio";
> 	simple-audio-card,format = "i2s";
> 	simple-audio-card,bitclock-master = <&sound_codec>;
> 	simple-audio-card,frame-master = <&sound_codec>;
> 	simple-audio-card,widgets =
> 		"Speaker", "Ext Spk";
> 	simple-audio-card,routing =
> 		"Ext Spk", "SPKOUTP",
> 		"Ext Spk", "SPKOUTN";
> 
> 	assigned-clocks = <&clks IMX6QDL_CLK_CKO2_SEL>,
> 			  <&clks IMX6QDL_CLK_CKO2>;
> 	assigned-clock-parents = <&clks IMX6QDL_CLK_OSC>,
> 				 <&clks IMX6QDL_CLK_CKO2_PODF>;
> 	assigned-clock-rates = <0 24000000>;
> 
> 	sound_master: simple-audio-card,cpu {
> 		sound-dai = <&ssi2>;
> 	};
> 
> 	sound_codec: simple-audio-card,codec {
> 		sound-dai = <&codec>;
> 		clocks = <&clks IMX6QDL_CLK_CKO2>;
> 	};
> };
> 
> &audmux {
> 	pinctrl-names = "default";
> 	pinctrl-0 = <&pinctrl_audmux>;
> 	status = "okay";
> 
> 	ssi2 {
> 		fsl,audmux-port = <1>;
> 		fsl,port-config = <
> 			(IMX_AUDMUX_V2_PTCR_SYN |
> 			 IMX_AUDMUX_V2_PTCR_TFSEL(4) |
> 			 IMX_AUDMUX_V2_PTCR_TCSEL(4) |
> 			 IMX_AUDMUX_V2_PTCR_TFSDIR |
> 			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
> 			IMX_AUDMUX_V2_PDCR_RXDSEL(4)
> 		>;
> 	};
> 
> 	aud5 {
> 		fsl,audmux-port = <4>;
> 		fsl,port-config = <
> 			IMX_AUDMUX_V2_PTCR_SYN
> 			IMX_AUDMUX_V2_PDCR_RXDSEL(1)
> 		>;
> 	};
> };
> 
> &ssi2 {
> 	status = "okay";
> };
> 
> &i2c2 {
> 	status = "okay";
> 	clock-frequency = <100000>;
> 	pinctrl-names = "default";
> 	pinctrl-0 = <&pinctrl_i2c2>;
> 
> 	codec: wm8510@1a {
> 		#sound-dai-cells = <0>;
> 		compatible = "wlf,wm8510";
> 		reg = <0x1a>;
> 	};
> };
> 
> &iomuxc {
> 	pinctrl-names = "default";
> 	pinctrl-0 = <&pinctrl_sound_mclk>;
> 
> 	pinctrl_sound_mclk: sound {
> 		/* WM8510 MCLK */
> 		fsl,pins = <
> 			MX6QDL_PAD_NANDF_CS2__CCM_CLKO2	0x130b0
> 		>;
> 	};
> 
> 	pinctrl_audmux: audmux {
> 		fsl,pins = <
> 			MX6QDL_PAD_KEY_COL0__AUD5_TXC	0x130b0
> 			MX6QDL_PAD_KEY_COL1__AUD5_TXFS	0x130b0
> 			MX6QDL_PAD_KEY_ROW1__AUD5_RXD	0x130b0
> 			MX6QDL_PAD_KEY_ROW0__AUD5_TXD	0x130b0
> 		>;
> 	};
> };
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@xxxxxxxxxxxxxxxx
> https://secure-web.cisco.com/12rjkHN8w-zo4qdOKo1yt9xPPcmBaclCQR4WQF2k_Jj49zFHnCrViRkRAqrsmfCcWU39fS_DL_iZHc-IffMyz8RpVtMX0Vs0yiXUH0tWXkuHFgYtW7wXDRpBMdRYxoz3-p1lD5bujtMJ3yB7vcypNXtuKxDV22Hjku4wZ3gQ1K8jk9O0Guh8fRdtsYEuhLDg_luRoGMQ7RFaGd6OlP-yK60kgJN-KIN5g-Px7OF8RL_WEW5JG_5twI9C2fhE_a_ZlnV_k4eHPoN27A-vFf_l-kT_T5lzdFXL9HHb4qWXmK2h-euJq2BQmT-6uBcvaXLCX5NsRijFIkgrDb0HdoXGeF52UWGb5qjhQzwVbo3T0d6UtDfKHw2UBj0RRxXXaMLL63n3f5h9pP0O_gG6XYlHZ0w/https%3A%2F%2Fmailman.alsa-project.org%2Fmailman%2Flistinfo%2Falsa-devel
> 
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel



[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux