>
> On Mon, Feb 25, 2019 at 02:48:18AM +0000, S.j. Wang wrote:
> > There is very low possibility ( < 0.1% ) that channel swap happened in
> > beginning when multi output/input pin is enabled. The issue is that
> > hardware can't send data to correct pin in the beginning with the
> > normal enable flow.
> >
> > This is hardware issue, but there is no errata, the workaround flow is
> > that: Each time playback/recording, firstly clear the xSMA/xSMB, then
> > enable TE/RE, then enable xSMB and xSMA (xSMB must be enabled
> before
> > xSMA). Which is to use the xSMA as the trigger start register,
> > previously the xCR_TE or xCR_RE is the bit for starting.
> >
> > Fixes 43d24e76b698 ("ASoC: fsl_esai: Add ESAI CPU DAI driver")
> > Cc: <stable@xxxxxxxxxxxxxxx>
> > Reviewed-by: Fabio Estevam <festevam@xxxxxxxxx>
> > Signed-off-by: Shengjiu Wang <shengjiu.wang@xxxxxxx>
> > ---
> > Changes in v2
> > - update commit comments.
> >
> > sound/soc/fsl/fsl_esai.c | 32 ++++++++++++++++++++++----------
> > 1 file changed, 22 insertions(+), 10 deletions(-)
> >
> > diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c index
> > afe67c865330..23bd0ad4ac31 100644
> > --- a/sound/soc/fsl/fsl_esai.c
> > +++ b/sound/soc/fsl/fsl_esai.c
> > @@ -54,6 +54,8 @@ struct fsl_esai {
> > u32 fifo_depth;
> > u32 slot_width;
> > u32 slots;
> > + u32 tx_mask;
> > + u32 rx_mask;
> > u32 hck_rate[2];
> > u32 sck_rate[2];
> > bool hck_dir[2];
> > @@ -361,21 +363,13 @@ static int fsl_esai_set_dai_tdm_slot(struct
> snd_soc_dai *dai, u32 tx_mask,
> > regmap_update_bits(esai_priv->regmap, REG_ESAI_TCCR,
> > ESAI_xCCR_xDC_MASK, ESAI_xCCR_xDC(slots));
> >
> > - regmap_update_bits(esai_priv->regmap, REG_ESAI_TSMA,
> > - ESAI_xSMA_xS_MASK, ESAI_xSMA_xS(tx_mask));
> > - regmap_update_bits(esai_priv->regmap, REG_ESAI_TSMB,
> > - ESAI_xSMB_xS_MASK, ESAI_xSMB_xS(tx_mask));
> > -
> > regmap_update_bits(esai_priv->regmap, REG_ESAI_RCCR,
> > ESAI_xCCR_xDC_MASK, ESAI_xCCR_xDC(slots));
> >
> > - regmap_update_bits(esai_priv->regmap, REG_ESAI_RSMA,
> > - ESAI_xSMA_xS_MASK, ESAI_xSMA_xS(rx_mask));
> > - regmap_update_bits(esai_priv->regmap, REG_ESAI_RSMB,
> > - ESAI_xSMB_xS_MASK, ESAI_xSMB_xS(rx_mask));
> > -
> > esai_priv->slot_width = slot_width;
> > esai_priv->slots = slots;
> > + esai_priv->tx_mask = tx_mask;
> > + esai_priv->rx_mask = rx_mask;
>
> The two masks only got values here. If a machine driver doesn't have a
> set_dai_tdm_slot() call, they will be remained as 0 and then will seemly
> clean those four registers.
>
> Thanks
> Nicolin
Then I think we need to add default value for tx_mask and rx_mask, that is
In the probe function to add:
esai_priv->tx_mask = 0xFFFFFFFF;
esai_priv->rx_mask = 0xFFFFFFFF;
best regards
wang shengjiu
>
> >
> > return 0;
> > }
> > @@ -596,6 +590,7 @@ static int fsl_esai_trigger(struct
> snd_pcm_substream *substream, int cmd,
> > bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
> > u8 i, channels = substream->runtime->channels;
> > u32 pins = DIV_ROUND_UP(channels, esai_priv->slots);
> > + u32 mask;
> >
> > switch (cmd) {
> > case SNDRV_PCM_TRIGGER_START:
> > @@ -611,12 +606,23 @@ static int fsl_esai_trigger(struct
> snd_pcm_substream *substream, int cmd,
> > regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx),
> > tx ? ESAI_xCR_TE_MASK :
> ESAI_xCR_RE_MASK,
> > tx ? ESAI_xCR_TE(pins) :
> ESAI_xCR_RE(pins));
> > + mask = tx ? esai_priv->tx_mask : esai_priv->rx_mask;
> > +
> > + regmap_update_bits(esai_priv->regmap,
> REG_ESAI_xSMB(tx),
> > + ESAI_xSMB_xS_MASK,
> ESAI_xSMB_xS(mask));
> > + regmap_update_bits(esai_priv->regmap,
> REG_ESAI_xSMA(tx),
> > + ESAI_xSMA_xS_MASK,
> ESAI_xSMA_xS(mask));
> > +
> > break;
> > case SNDRV_PCM_TRIGGER_SUSPEND:
> > case SNDRV_PCM_TRIGGER_STOP:
> > case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
> > regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx),
> > tx ? ESAI_xCR_TE_MASK :
> ESAI_xCR_RE_MASK, 0);
> > + regmap_update_bits(esai_priv->regmap,
> REG_ESAI_xSMA(tx),
> > + ESAI_xSMA_xS_MASK, 0);
> > + regmap_update_bits(esai_priv->regmap,
> REG_ESAI_xSMB(tx),
> > + ESAI_xSMB_xS_MASK, 0);
> >
> > /* Disable and reset FIFO */
> > regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx),
> @@ -906,6
> > +912,12 @@ static int fsl_esai_probe(struct platform_device *pdev)
> > return ret;
> > }
> >
> > + /* Clear the TSMA, TSMB, RSMA, RSMB */
> > + regmap_write(esai_priv->regmap, REG_ESAI_TSMA, 0);
> > + regmap_write(esai_priv->regmap, REG_ESAI_TSMB, 0);
> > + regmap_write(esai_priv->regmap, REG_ESAI_RSMA, 0);
> > + regmap_write(esai_priv->regmap, REG_ESAI_RSMB, 0);
> > +
> > ret = devm_snd_soc_register_component(&pdev->dev,
> &fsl_esai_component,
> > &fsl_esai_dai, 1);
> > if (ret) {
> > --
> > 1.9.1
> >
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
