Re: auto_mute for early patch issue

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 01 Feb 2019 10:18:45 +0100,
Kailang wrote:
> 
> Hi Takashi,
> 
> I forgot it solved this issue for ALC283 before. It was also chrome OS case.
> I cooked attach patch. It will not need to move spec->suppress_auto_mute check line.
> Many thanks.

OK, I'll queue this to for-linus branch, as it fixes real bugs.

OTOH, I find filling hp_pins[] unconditionally makes sense.
So, for 5.1 development, maybe it'd be better to drop this change
again and apply the change to move the spec->suppress_auto_mute
check.

But the remaining question is whether moving the check helped at all;
it wasn't clear from your previous replies...


thanks,

Takashi


> 
> BR,
> Kailang
> 
> -----Original Message-----
> From: Takashi Iwai <tiwai@xxxxxxx> 
> Sent: Thursday, January 31, 2019 7:02 PM
> To: Kailang <kailang@xxxxxxxxxxx>
> Cc: (alsa-devel@xxxxxxxxxxxxxxxx) <alsa-devel@xxxxxxxxxxxxxxxx>
> Subject: Re: auto_mute for early patch issue
> 
> On Thu, 31 Jan 2019 11:50:26 +0100,
> Kailang wrote:
> > 
> > Hi Takashi,
> > 
> > spec->suppress_auto_mute = 1;
> > This will cause spec->gen.autocfg.hp_pins [0] = 0.
> > This will cause alc2??_init() and alc2??_shutup() and dell headset mode not run errors.
> 
> That's the result with your suggested change (moving
> spec->supress_auto_mute_mode in check_auto_mute_availability()) ??
> 
> 
> Takashi
> 
> > 
> > Does it has other place to store pin NID? 
> > Or just only this place hp_pin = spec->gen.autocfg.hp_pins[0]; to get headphone NID.
> > 
> > BR,
> > Kailang
> > 
> > -----Original Message-----
> > From: Takashi Iwai <tiwai@xxxxxxx> 
> > Sent: Thursday, January 31, 2019 4:23 PM
> > To: Kailang <kailang@xxxxxxxxxxx>
> > Cc: (alsa-devel@xxxxxxxxxxxxxxxx) <alsa-devel@xxxxxxxxxxxxxxxx>
> > Subject: Re: auto_mute for early patch issue
> > 
> > On Thu, 31 Jan 2019 09:00:36 +0100,
> > Kailang wrote:
> > > 
> > > Hi Takashi,
> > > 
> > > I move check line to below. It will show value for hp_pins[0].
> > > As I know, search from verb table in function snd_hda_parse_pin_defcfg().
> > > It will fill pins at auto_pin_cfg.
> > > Why it need to run below function to get cfg->hp_pins?
> > 
> > It's just because hp_pins[] and speaker_pins[] are used for the case with the auto-mute, so far, not for other evaluations :)
> > 
> > The change below looks safe, so if this works for you, feel fee to apply like that.
> > 
> > 
> > thanks,
> > 
> > Takashi
> > 
> > 
> > > static int check_auto_mute_availability(struct hda_codec *codec) {
> > > 	struct hda_gen_spec *spec = codec->spec;
> > > 	struct auto_pin_cfg *cfg = &spec->autocfg;
> > > 	int present = 0;
> > > 	int i, err;
> > > 
> > > -	if (spec->suppress_auto_mute)
> > > -		return 0;
> > > 
> > > 	if (cfg->hp_pins[0])
> > > 		present++;
> > > 	if (cfg->line_out_pins[0])
> > > 		present++;
> > > 	if (cfg->speaker_pins[0])
> > > 		present++;
> > > 	if (present < 2) /* need two different output types */
> > > 		return 0;
> > > 
> > > 	if (!cfg->speaker_pins[0] &&
> > > 	    cfg->line_out_type == AUTO_PIN_SPEAKER_OUT) {
> > > 		memcpy(cfg->speaker_pins, cfg->line_out_pins,
> > > 		       sizeof(cfg->speaker_pins));
> > > 		cfg->speaker_outs = cfg->line_outs;
> > > 	}
> > > 
> > > 	if (!cfg->hp_pins[0] &&
> > > 	    cfg->line_out_type == AUTO_PIN_HP_OUT) {
> > > 		memcpy(cfg->hp_pins, cfg->line_out_pins,
> > > 		       sizeof(cfg->hp_pins));
> > > 		cfg->hp_outs = cfg->line_outs;
> > > 	}
> > > 
> > > +	if (spec->suppress_auto_mute)
> > > +		return 0;
> > > 
> > > ......
> > > .....
> > > ......
> > > }
> > > 
> > > BR,
> > > Kailang
> > > 
> > > -----Original Message-----
> > > From: Kailang
> > > Sent: Thursday, January 31, 2019 12:08 PM
> > > To: Takashi Iwai (tiwai@xxxxxxx) <tiwai@xxxxxxx>
> > > Cc: (alsa-devel@xxxxxxxxxxxxxxxx) <alsa-devel@xxxxxxxxxxxxxxxx>
> > > Subject: auto_mute for early patch issue
> > > 
> > > Hi Takashi,
> > > 
> > > Chrome OS use early patch firmware file to load model and use auto_mute =no hint options.
> > > I find an issue for early patch issue about hint option auto_mute = no.
> > > 
> > > This will cause all spec->init_hook can't get hp_pin values.
> > > 
> > > For example: alc225_init() alc225_shutup() alc256_init() alc256_shutup() Early patch file hint auto_mute = no equal spec->suppress_auto_mute = 1 It will return function check_auto_mute_availability() in had_generic.c.
> > > 
> > > hp_pin = spec->gen.autocfg.hp_pins[0];  ==> It will get value 0.
> > > 
> > > I think this issue was for a long time.
> > > Please see the attach dmesg. One is kill hint auto_mute option. 
> > > 
> > > BR,
> > > Kailang
> > > 
> > 
> > ------Please consider the environment before printing this e-mail.
> > 
> [2 0000-fix-lose-hp-pins.patch <application/octet-stream (base64)>]
> 
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel



[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux