On Sun, 20 Jan 2019 09:25:44 +0100, Takashi Sakamoto wrote: > > Hi, > > In 2012, RME GmbH shipped Fireface UFX. This model is one of latter > models of Fireface series and support both of IEEE 1394 bus and USB. > Furthermore, it supports two types of remote control unit (Basic > Remote and Advanced Remote Control) with by 9pin mini-din connector. > > This patchset adds support for this model, as a part of devices > by ALSA firewire stack (therefore it's not a device of USB). At > present, maintain of isochronous communication and synchronization > status are cleared but asynchronous communication for MIDI messages > are not yet, therefore this commit adds support for isochronous > communication for PCM frames. > > This work is based on my packet analysis from rent device for a short > term (2 weeks). I'm happy to get your responses till next weekend. > Driver code in a remote branch is available for backport till Linux > kernel v4.17 or later for your test. > https://github.com/takaswie/snd-firewire-improve/tree/topic/ff800-midi > > Regards > > Takashi Sakamoto (9): > ALSA: fireface: rename protocol layer for former models > ALSA: fireface: unify protocol layer for FF400/FF800 > ALSA: fireface: obsolete proc node to leave one node > ALSA: fireface: add protocol-dependent operation to dump status > ALSA: fireface: add protocol-dependent operation to switch mode to > fetch PCM frame > ALSA: fireface: add protocol-dependent operation to get clock status > ALSA: fireface: code refactoring for dump of sync status > ALSA: fireface: code refactoring to parse of clock configuration > ALSA: fireface: add support for Fireface UCX Applied all patches now. Thanks. Takashi _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
