On Tue, Jan 08, 2019 at 01:05:51PM +0000, Viorel Suman wrote: > Add the DT binding documentation for Audio Mixer > machine driver. > > Signed-off-by: Viorel Suman <viorel.suman@xxxxxxx> > --- > .../devicetree/bindings/sound/imx-audmix.txt | 24 ++++++++++++++++++++++ > 1 file changed, 24 insertions(+) > create mode 100644 Documentation/devicetree/bindings/sound/imx-audmix.txt > > diff --git a/Documentation/devicetree/bindings/sound/imx-audmix.txt b/Documentation/devicetree/bindings/sound/imx-audmix.txt > new file mode 100644 > index 0000000..6ac1230 > --- /dev/null > +++ b/Documentation/devicetree/bindings/sound/imx-audmix.txt > @@ -0,0 +1,24 @@ > +NXP Audio Mixer (AUDMIX) machine driver. > + > +Required properties: > +=================================== > + - compatible : Compatible list, contains "fsl,imx-audmix" > + > + - model : Short audio card description. > + > + - dais : Must contain a list of phandles to AUDMIX connected > + DAIs. The current implementation requires two phandles > + to SAI interfaces to be provided, the first SAI in the > + list being used to route the AUDMIX output. > + > + - audmix-controller : Must contain the phandle to the AUDMIX device node. I don't think you need 2 nodes for this as this one is just a virtual device. Just add the dais property to the audmix node. Rob _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
