On Fri, 04 Jan 2019 00:16:42 +0100, Con Kolivas wrote: > > Hi Iwai-san. > > Added some relevant CCs. > > On Fri, 4 Jan 2019 at 00:23, Takashi Iwai <tiwai@xxxxxxx> wrote: > > > > On Thu, 03 Jan 2019 12:43:54 +0100, > > Con Kolivas wrote: > > > > > > Upon switching from 4.19.0 to 4.20.0, pulseaudio started complaining > > > that sinks that previously worked are no longer supported. > > > > > > On 4.19.0 trying 24 bit 88200, 176400, and 192000 I get the following > > > output from pulse. > > > resampler.c: Forcing resampler 'copy', because of fixed, identical > > > sample rates.sink-input.c: Created input 15 "Playback Stream" on > > > alsa_output.usb-DSPeaker_Anti-Mode_X4-00.iec958-stereo with sample > > > spec float32le 2ch 176400Hz and channel map front-left,front-right > > > > > > Switching to 4.20 gives me: > > > alsa-sink.c: Sink does not support sample rate of 176400 Hz > > > and > > > alsa-sink.c: Sink does not support sample rate of 88200 Hz > > > and > > > alsa-sink.c: Sink does not support sample rate of 192000 Hz > > > > > > Sample rates of 44100, 48000, and 96000 work fine, but 88200, 176400, > > > and 192000 no longer work > > > > > > Switching back to 4.19 immediately fixes the issue. > > > > > > > > > I tried looking through the alsa changelogs but there were too many to > > > give an obvious culprit, and haven't had time to do a git bisect. If > > > there's an obvious choice patch to back out I'd be grateful for the > > > heads up. > > > > Hm, through a quick glance, there hasn't been any relevant changes in > > USB-audio part (sound/usb/*). Also, the changes in sound/core/* are > > irrelevant with your problem. > > > > So I have no idea what went wrong. The bisection, or at least, > > narrowing down the commits would be helpful. > > I've done a git bisect and found the offending commit: > > commit f13912d3f014a7f2fa5c35d25ee8c3f96bda6272 (refs/bisect/bad) > Author: Saranya Gopal <saranya.gopal@xxxxxxxxx> > Date: Wed Sep 12 08:46:26 2018 +0530 > > usbcore: Select UAC3 configuration for audio if present > > USB audio class 3.0 specification introduced many significant > changes like > - new power domains, support for LPM/L1 > - new cluster descriptor > - new high capability and class-specific string descriptors > - BADD profiles > - ... and many other things (check spec from link below: > http://www.usb.org/developers/docs/devclass_docs/USB_Audio_v3.0.zip) > > Now that UAC3 is supported in linux, choose UAC3 > configuration for audio if the device supports it. > Selecting this configuration will enable the system to > save power by leveraging the new power domains and LPM L1 > capability and also support new codec types and data formats > for consumer audio applications. > > Signed-off-by: Saranya Gopal <saranya.gopal@xxxxxxxxx> > Reviewed-by: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx> > Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> > > Reverting this patch fixes the problem for me. [ Adding linux-usb ML to Cc, as it's a core USB issue ] So the device seems incorrectly advertising as if it were supporting UAC3 -- assuming the device is still not UAC3-capable. IOW, it's a buggy firmware. We need some blacklisting, or revert the commit for now, unless any real UAC3 device comes up to the market. thanks, Takashi _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel