Hi Rob, On Vi, 2018-12-28 at 17:32 -0600, Rob Herring wrote: > On Tue, Dec 18, 2018 at 04:30:01PM +0000, Viorel Suman wrote: > > > > This patch implements Audio Mixer CPU DAI driver for NXP iMX8 SOCs. > > The Audio Mixer is a on-chip functional module that allows mixing > > of > > two audio streams into a single audio stream. > > > > Audio Mixer datasheet is available here: > > https://www.nxp.com/docs/en/reference-manual/IMX8DQXPRM.pdf > > > > Signed-off-by: Viorel Suman <viorel.suman@xxxxxxx> > > --- > > .../devicetree/bindings/sound/fsl,amix.txt | 45 ++ > This should be a separate patch. Ok, thank you, will split this into several patches. > > > > > sound/soc/fsl/Kconfig | 7 + > > sound/soc/fsl/Makefile | 3 + > > sound/soc/fsl/fsl_amix.c | 554 > > +++++++++++++++++++++ > > sound/soc/fsl/fsl_amix.h | 101 ++++ > > 5 files changed, 710 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/sound/fsl,amix.txt > > create mode 100644 sound/soc/fsl/fsl_amix.c > > create mode 100644 sound/soc/fsl/fsl_amix.h > > > > diff --git a/Documentation/devicetree/bindings/sound/fsl,amix.txt > > b/Documentation/devicetree/bindings/sound/fsl,amix.txt > > new file mode 100644 > > index 0000000..049144f > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/sound/fsl,amix.txt > > @@ -0,0 +1,45 @@ > > +NXP Audio Mixer (AMIX). > > + > > +The Audio Mixer is a on-chip functional module that allows mixing > > of two > > +audio streams into a single audio stream. Audio Mixer has two > > input serial > > +audio interfaces. These are driven by two Synchronous Audio > > interface > > +modules (SAI). Each input serial interface carries 8 audio > > channels in its > > +frame in TDM manner. Mixer mixes audio samples of corresponding > > channels > > +from two interfaces into a single sample. Before mixing, audio > > samples of > > +two inputs can be attenuated based on configuration. The output of > > the > > +Audio Mixer is also a serial audio interface. Like input > > interfaces it has > > +the same TDM frame format. This output is used to drive the serial > > DAC TDM > > +interface of audio codec and also sent to the external pins along > > with the > > +receive path of normal audio SAI module for readback by the CPU. > > + > > +The output of Audio mixer can be selected from any of the three > > streams > > + - serial audio input 1 > > + - serial audio input 2 > > + - Mixed audio > > + > > +Mixing operation is independent of audio sample rate but the two > > audio > > +input streams must have same audio sample rate with same number of > > channels > > +in TDM frame to be eligible for mixing. > > + > > +Device driver required properties: > > +================================= > > + - compatible : Compatible list, contains > > "fsl,imx8qm-amix" > > + > > + - reg : Offset and length of the register > > set for the device. > > + > > + - clocks : Must contain an entry for each entry > > in clock-names. > > + > > + - clock-names : Must include the "ipg" for > > register access. > Humm, no audio related clocks? Right, no audio related clocks - Audio Mixer operates on the clocks supplied by input Synchronous Audio Interfaces. > > > > > > + > > + - power-domains : Must contain the phandle to the AMIX > > power domain node > > + > > +Device driver configuration example: > > +====================================== > > + amix: amix@59840000 { > > + compatible = "fsl,imx8qm-amix"; > > + reg = <0x0 0x59840000 0x0 0x10000>; > > + clocks = <&clk IMX8QXP_AUD_AMIX_IPG>; > > + clock-names = "ipg"; > > + power-domains = <&pd_amix>; > > + }; > > + Regards, Viorel _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
