Re: [PATCH] ASoC: Intel: Boards: move the codec PLL configuration to _init

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12/5/18 4:11 AM, mac.chiang@xxxxxxxxx wrote:
From: Mac Chiang <mac.chiang@xxxxxxxxx>

move the codec PLL to rt5682_codec_init, because codec only need to config the clock source/PLL once.
As the result, remove the platform_clock_controls since no need to control clock anymore.

Signed-off-by: Shuming Fan <shumingf@xxxxxxxxxxx>
Signed-off-by: Mac Chiang <mac.chiang@xxxxxxxxx>

Looks like I forgot to ack this patch which was reviewed internally and feedback from Bard Liao applied.

Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>


---
  sound/soc/intel/boards/glk_rt5682_max98357a.c | 45 +++++----------------------
  1 file changed, 7 insertions(+), 38 deletions(-)

diff --git a/sound/soc/intel/boards/glk_rt5682_max98357a.c b/sound/soc/intel/boards/glk_rt5682_max98357a.c
index c74c4f1..8f83b18 100644
--- a/sound/soc/intel/boards/glk_rt5682_max98357a.c
+++ b/sound/soc/intel/boards/glk_rt5682_max98357a.c
@@ -55,39 +55,6 @@ enum {
  	GLK_DPCM_AUDIO_HDMI3_PB,
  };
-static int platform_clock_control(struct snd_soc_dapm_widget *w,
-					struct snd_kcontrol *k, int  event)
-{
-	struct snd_soc_dapm_context *dapm = w->dapm;
-	struct snd_soc_card *card = dapm->card;
-	struct snd_soc_dai *codec_dai;
-	int ret = 0;
-
-	codec_dai = snd_soc_card_get_codec_dai(card, GLK_REALTEK_CODEC_DAI);
-	if (!codec_dai) {
-		dev_err(card->dev, "Codec dai not found; Unable to set/unset codec pll\n");
-		return -EIO;
-	}
-
-	if (SND_SOC_DAPM_EVENT_OFF(event)) {
-		ret = snd_soc_dai_set_sysclk(codec_dai, 0, 0, 0);
-		if (ret)
-			dev_err(card->dev, "failed to stop sysclk: %d\n", ret);
-	} else if (SND_SOC_DAPM_EVENT_ON(event)) {
-		ret = snd_soc_dai_set_pll(codec_dai, 0, RT5682_PLL1_S_MCLK,
-					GLK_PLAT_CLK_FREQ, RT5682_PLL_FREQ);
-		if (ret < 0) {
-			dev_err(card->dev, "can't set codec pll: %d\n", ret);
-			return ret;
-		}
-	}
-
-	if (ret)
-		dev_err(card->dev, "failed to start internal clk: %d\n", ret);
-
-	return ret;
-}
-
  static const struct snd_kcontrol_new geminilake_controls[] = {
  	SOC_DAPM_PIN_SWITCH("Headphone Jack"),
  	SOC_DAPM_PIN_SWITCH("Headset Mic"),
@@ -102,14 +69,10 @@ static const struct snd_soc_dapm_widget geminilake_widgets[] = {
  	SND_SOC_DAPM_SPK("HDMI1", NULL),
  	SND_SOC_DAPM_SPK("HDMI2", NULL),
  	SND_SOC_DAPM_SPK("HDMI3", NULL),
-	SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0,
-			platform_clock_control, SND_SOC_DAPM_PRE_PMU |
-			SND_SOC_DAPM_POST_PMD),
  };
static const struct snd_soc_dapm_route geminilake_map[] = {
  	/* HP jack connectors - unknown if we have jack detection */
-	{ "Headphone Jack", NULL, "Platform Clock" },
  	{ "Headphone Jack", NULL, "HPOL" },
  	{ "Headphone Jack", NULL, "HPOR" },
@@ -117,7 +80,6 @@ static const struct snd_soc_dapm_route geminilake_map[] = {
  	{ "Spk", NULL, "Speaker" },
/* other jacks */
-	{ "Headset Mic", NULL, "Platform Clock" },
  	{ "IN1P", NULL, "Headset Mic" },
/* digital mics */
@@ -177,6 +139,13 @@ static int geminilake_rt5682_codec_init(struct snd_soc_pcm_runtime *rtd)
  	struct snd_soc_jack *jack;
  	int ret;
+ ret = snd_soc_dai_set_pll(codec_dai, 0, RT5682_PLL1_S_MCLK,
+					GLK_PLAT_CLK_FREQ, RT5682_PLL_FREQ);
+	if (ret < 0) {
+		dev_err(rtd->dev, "can't set codec pll: %d\n", ret);
+		return ret;
+	}
+
  	/* Configure sysclk for codec */
  	ret = snd_soc_dai_set_sysclk(codec_dai, RT5682_SCLK_S_PLL1,
  					RT5682_PLL_FREQ, SND_SOC_CLOCK_IN);


_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel



[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux