On 12/18/18 2:24 AM, Rander Wang wrote:
For some reason this field was set to zero when all other drivers use
.dynamic = 1 for front-ends. This change was tested on Dell XPS13 and
has no impact with the existing legacy driver. The SOF driver also works
with this change which enables it to override the fixed topology.
Signed-off-by: Rander Wang <rander.wang@xxxxxxxxxxxxxxx>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
Note that this change is not needed for the bdw-rt5677 machine driver,
the "Loopback" front-end is not exposed.
---
sound/soc/intel/boards/broadwell.c | 2 +-
sound/soc/intel/boards/haswell.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/intel/boards/broadwell.c b/sound/soc/intel/boards/broadwell.c
index 68e6543e6cb0..99f2a0156ae8 100644
--- a/sound/soc/intel/boards/broadwell.c
+++ b/sound/soc/intel/boards/broadwell.c
@@ -192,7 +192,7 @@ static struct snd_soc_dai_link broadwell_rt286_dais[] = {
.stream_name = "Loopback",
.cpu_dai_name = "Loopback Pin",
.platform_name = "haswell-pcm-audio",
- .dynamic = 0,
+ .dynamic = 1,
.codec_name = "snd-soc-dummy",
.codec_dai_name = "snd-soc-dummy-dai",
.trigger = {SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST},
diff --git a/sound/soc/intel/boards/haswell.c b/sound/soc/intel/boards/haswell.c
index eab1f439dd3f..a4022983a7ce 100644
--- a/sound/soc/intel/boards/haswell.c
+++ b/sound/soc/intel/boards/haswell.c
@@ -146,7 +146,7 @@ static struct snd_soc_dai_link haswell_rt5640_dais[] = {
.stream_name = "Loopback",
.cpu_dai_name = "Loopback Pin",
.platform_name = "haswell-pcm-audio",
- .dynamic = 0,
+ .dynamic = 1,
.codec_name = "snd-soc-dummy",
.codec_dai_name = "snd-soc-dummy-dai",
.trigger = {SND_SOC_DPCM_TRIGGER_POST, SND_SOC_DPCM_TRIGGER_POST},
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
