The current SKYLAKE kconfig is a all-you-can-eat selection that will
support all known plaforms. This is however not necessarily a good
thing: most platforms for SKL and KBL don't support the DSP, but a
number of CNL/WHL ones do. Selecting this driver in all cases isn't
really smart and will require users to muck with blacklists.
Partition the configs to allow distributions to select on which
platform this driver is used. Keep the existing SND_SOC_INTEL_SKYLAKE
config to select everything for backwards compatibility. This patch does
not provide new functionality, only finer-grained choices in supported
platforms.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
---
v2: solve Kconfig conflict with Hui Wang's patchset for KBL/RT5660 support
sound/soc/intel/Kconfig | 73 ++++++++++++++++++++++++++++++----
sound/soc/intel/boards/Kconfig | 16 +++++++-
sound/soc/intel/skylake/skl.c | 12 ++++++
3 files changed, 92 insertions(+), 9 deletions(-)
diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig
index 18e717703685..99a62ba409df 100644
--- a/sound/soc/intel/Kconfig
+++ b/sound/soc/intel/Kconfig
@@ -102,15 +102,74 @@ config SND_SST_ATOM_HIFI2_PLATFORM_ACPI
recommended option
config SND_SOC_INTEL_SKYLAKE
- tristate "SKL/BXT/KBL/GLK/CNL... Platforms"
+ tristate "All Skylake/SST Platforms"
depends on PCI && ACPI
- select SND_SOC_INTEL_SKYLAKE_COMMON
+ select SND_SOC_INTEL_SKL
+ select SND_SOC_INTEL_APL
+ select SND_SOC_INTEL_KBL
+ select SND_SOC_INTEL_GLK
+ select SND_SOC_INTEL_CNL
+ select SND_SOC_INTEL_CFL
help
- If you have a Intel Skylake/Broxton/ApolloLake/KabyLake/
- GeminiLake or CannonLake platform with the DSP enabled in the BIOS
- then enable this option by saying Y or m.
+ This is a backwards-compatible option to select all devices
+ supported by the Intel SST/Skylake driver. This option is no
+ longer recommended and will be deprecated when the SOF
+ driver is introduced. Distributions should explicitly
+ select which platform uses this driver.
+
+config SND_SOC_INTEL_SKL
+ tristate "Skylake Platforms"
+ depends on PCI && ACPI
+ select SND_SOC_INTEL_SKYLAKE_FAMILY
+ help
+ If you have a Intel Skylake platform with the DSP enabled
+ in the BIOS then enable this option by saying Y or m.
+
+config SND_SOC_INTEL_APL
+ tristate "Broxton/ApolloLake Platforms"
+ depends on PCI && ACPI
+ select SND_SOC_INTEL_SKYLAKE_FAMILY
+ help
+ If you have a Intel Broxton/ApolloLake platform with the DSP
+ enabled in the BIOS then enable this option by saying Y or m.
+
+config SND_SOC_INTEL_KBL
+ tristate "Kabylake Platforms"
+ depends on PCI && ACPI
+ select SND_SOC_INTEL_SKYLAKE_FAMILY
+ help
+ If you have a Intel Kabylake platform with the DSP
+ enabled in the BIOS then enable this option by saying Y or m.
+
+config SND_SOC_INTEL_GLK
+ tristate "GeminiLake Platforms"
+ depends on PCI && ACPI
+ select SND_SOC_INTEL_SKYLAKE_FAMILY
+ help
+ If you have a Intel GeminiLake platform with the DSP
+ enabled in the BIOS then enable this option by saying Y or m.
+
+config SND_SOC_INTEL_CNL
+ tristate "CannonLake/WhiskyLake Platforms"
+ depends on PCI && ACPI
+ select SND_SOC_INTEL_SKYLAKE_FAMILY
+ help
+ If you have a Intel CNL/WHL platform with the DSP
+ enabled in the BIOS then enable this option by saying Y or m.
+
+config SND_SOC_INTEL_CFL
+ tristate "CoffeeLake Platforms"
+ depends on PCI && ACPI
+ select SND_SOC_INTEL_SKYLAKE_FAMILY
+ help
+ If you have a Intel CoffeeLake platform with the DSP
+ enabled in the BIOS then enable this option by saying Y or m.
+
+config SND_SOC_INTEL_SKYLAKE_FAMILY
+ tristate
+ select SND_SOC_INTEL_SKYLAKE_COMMON
-if SND_SOC_INTEL_SKYLAKE
+if SND_SOC_INTEL_SKYLAKE_FAMILY
config SND_SOC_INTEL_SKYLAKE_SSP_CLK
tristate
@@ -135,7 +194,7 @@ config SND_SOC_INTEL_SKYLAKE_COMMON
GeminiLake or CannonLake platform with the DSP enabled in the BIOS
then enable this option by saying Y or m.
-endif ## SND_SOC_INTEL_SKYLAKE
+endif ## SND_SOC_INTEL_SKYLAKE_FAMILY
config SND_SOC_ACPI_INTEL_MATCH
tristate
diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig
index 3839d6205fcf..0a7e40d06395 100644
--- a/sound/soc/intel/boards/Kconfig
+++ b/sound/soc/intel/boards/Kconfig
@@ -172,7 +172,7 @@ config SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH
endif ## SND_SST_ATOM_HIFI2_PLATFORM
-if SND_SOC_INTEL_SKYLAKE
+if SND_SOC_INTEL_SKL
config SND_SOC_INTEL_SKL_RT286_MACH
tristate "SKL with RT286 I2S mode"
@@ -212,6 +212,10 @@ config SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH
Say Y or m if you have such a device. This is a recommended option.
If unsure select "N".
+endif ## SND_SOC_INTEL_SKL
+
+if SND_SOC_INTEL_APL
+
config SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH
tristate "Broxton with DA7219 and MAX98357A in I2S Mode"
depends on MFD_INTEL_LPSS && I2C && ACPI
@@ -239,6 +243,10 @@ config SND_SOC_INTEL_BXT_RT298_MACH
Say Y or m if you have such a device. This is a recommended option.
If unsure select "N".
+endif ## SND_SOC_INTEL_APL
+
+if SND_SOC_INTEL_KBL
+
config SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH
tristate "KBL with RT5663 and MAX98927 in I2S Mode"
depends on MFD_INTEL_LPSS && I2C && ACPI
@@ -303,6 +311,10 @@ config SND_SOC_INTEL_KBL_RT5660_MACH
create an alsa sound card for RT5660 I2S audio codec.
Say Y if you have such a device.
+endif ## SND_SOC_INTEL_KBL
+
+if SND_SOC_INTEL_GLK
+
config SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH
tristate "GLK with RT5682 and MAX98357A in I2S Mode"
depends on MFD_INTEL_LPSS && I2C && ACPI
@@ -317,7 +329,7 @@ config SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH
Say Y if you have such a device.
If unsure select "N".
-endif ## SND_SOC_INTEL_SKYLAKE
+endif ## SND_SOC_INTEL_GLK
if SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC
diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c
index f9888b1d5521..5abd35ca4e41 100644
--- a/sound/soc/intel/skylake/skl.c
+++ b/sound/soc/intel/skylake/skl.c
@@ -1142,24 +1142,36 @@ static void skl_remove(struct pci_dev *pci)
/* PCI IDs */
static const struct pci_device_id skl_ids[] = {
+#if IS_ENABLED(CONFIG_SND_SOC_INTEL_SKL)
/* Sunrise Point-LP */
{ PCI_DEVICE(0x8086, 0x9d70),
.driver_data = (unsigned long)&snd_soc_acpi_intel_skl_machines},
+#endif
+#if IS_ENABLED(CONFIG_SND_SOC_INTEL_APL)
/* BXT-P */
{ PCI_DEVICE(0x8086, 0x5a98),
.driver_data = (unsigned long)&snd_soc_acpi_intel_bxt_machines},
+#endif
+#if IS_ENABLED(CONFIG_SND_SOC_INTEL_KBL)
/* KBL */
{ PCI_DEVICE(0x8086, 0x9D71),
.driver_data = (unsigned long)&snd_soc_acpi_intel_kbl_machines},
+#endif
+#if IS_ENABLED(CONFIG_SND_SOC_INTEL_GLK)
/* GLK */
{ PCI_DEVICE(0x8086, 0x3198),
.driver_data = (unsigned long)&snd_soc_acpi_intel_glk_machines},
+#endif
+#if IS_ENABLED(CONFIG_SND_SOC_INTEL_CNL)
/* CNL */
{ PCI_DEVICE(0x8086, 0x9dc8),
.driver_data = (unsigned long)&snd_soc_acpi_intel_cnl_machines},
+#endif
+#if IS_ENABLED(CONFIG_SND_SOC_INTEL_CFL)
/* CFL */
{ PCI_DEVICE(0x8086, 0xa348),
.driver_data = (unsigned long)&snd_soc_acpi_intel_cnl_machines},
+#endif
{ 0, }
};
MODULE_DEVICE_TABLE(pci, skl_ids);
--
2.17.1
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
