On 11/12/2018 7.35, Tony Lindgren wrote:
> * Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx> [181211 05:16]:
>>
>> Hi Tony
>>
>>>> This looks a little bit strange for me.
>>>> Can you show me your DT for it ?
>>>
>>> Sure, adding also Sebastian to Cc. Here's what I currently have for droid 4
>>> dts with two codecs on I2S. Please just ignore the GNSS parts there..
>>>
>>> The TDM configuration is all done in the cpcap_audio_codec via set_tdm_slot().
>>> The modem voice call codec is a serdev driver :) I'll need some more time to
>>> be able to post patches but it's basically working for voice calls.
>>
>> Hmm... it seems strange...
>> I guess you are using "ti,omap4-mcbsp" driver (= linux/sound/soc/omap/omap-mcbsp.c)
>> Is this correct ?
>
> Yes.
>
>> If so, your driver is registering component as
>>
>> ret = devm_snd_soc_register_component(&pdev->dev,
>> &omap_mcbsp_component,
>> &omap_mcbsp_dai, 1);
>>
>> Your driver has only 1 DAI.
>
> Yes I have a patch for omap-mcbsp.c too :)
>
>>> mcbsp3_port: port {
>>> - cpu_dai3: endpoint {
>>> + cpu_dai3: endpoint@0 {
>>> dai-format = "dsp_a";
>>> frame-master = <&cpcap_audio_codec1>;
>>> bitclock-master = <&cpcap_audio_codec1>;
>>> remote-endpoint = <&cpcap_audio_codec1>;
>>> };
>>> + cpu_dai_mdm: endpoint@1 {
>>> + dai-format = "dsp_a";
>>> + frame-master = <&cpcap_audio_codec1>;
>>> + bitclock-master = <&cpcap_audio_codec1>;
>>> + remote-endpoint = <&mot_mdm6600_audio_codec0>;
>>> + };
>>
>> And here, you have 1 port, 2 endpoint.
>> Then, asoc_simple_card_get_dai_id() should return 1.
>>
>> And, your [2/2] patch,
>> I guess you are misunderstanding about "port" vs "endpoint",
>> or omap-mcbsp driver side need to update ?
>
> Yes omap-mcbsp driver needs to be updated for multiple endpoints.
>
> Adding Jarkko and Peter also to Cc, below is the WIP patch that I'm
> currently using for omap-mcbsp to add more DAIs.
Hrm.
McBSP have single DX and single DR pin. Iow each McBSP have single DAI.
>
> So far nothing else to do in the omap-mcbsp as it's the cpcap hardware
> that configures the TDM timeslots. And I'm currently assuming the
> first instance is the master, I guess that should be parsed from the
> the frame-master dts property instead.
>
> Regards,
>
> Tony
>
> 8< ----------------------
> diff --git a/sound/soc/omap/omap-mcbsp-priv.h b/sound/soc/omap/omap-mcbsp-priv.h
> --- a/sound/soc/omap/omap-mcbsp-priv.h
> +++ b/sound/soc/omap/omap-mcbsp-priv.h
> @@ -262,6 +262,8 @@ struct omap_mcbsp {
> struct omap_mcbsp_platform_data *pdata;
> struct omap_mcbsp_st_data *st_data;
> struct omap_mcbsp_reg_cfg cfg_regs;
> + struct snd_soc_dai_driver *dais;
> + int dai_count;
> struct snd_dmaengine_dai_dma_data dma_data[2];
> unsigned int dma_req[2];
> int dma_op_mode;
> diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
> --- a/sound/soc/omap/omap-mcbsp.c
> +++ b/sound/soc/omap/omap-mcbsp.c
> @@ -28,6 +28,7 @@
> #include <linux/pm_runtime.h>
> #include <linux/of.h>
> #include <linux/of_device.h>
> +#include <linux/of_graph.h>
> #include <sound/core.h>
> #include <sound/pcm.h>
> #include <sound/pcm_params.h>
> @@ -1318,23 +1319,53 @@ static int omap_mcbsp_remove(struct snd_soc_dai *dai)
> return 0;
> }
>
> -static struct snd_soc_dai_driver omap_mcbsp_dai = {
> - .probe = omap_mcbsp_probe,
> - .remove = omap_mcbsp_remove,
> - .playback = {
> - .channels_min = 1,
> - .channels_max = 16,
> - .rates = OMAP_MCBSP_RATES,
> - .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE,
> - },
> - .capture = {
> - .channels_min = 1,
> - .channels_max = 16,
> - .rates = OMAP_MCBSP_RATES,
> - .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE,
> - },
> - .ops = &mcbsp_dai_ops,
> -};
> +static int omap_mcbsp_init_dais(struct omap_mcbsp *mcbsp)
> +{
> + struct device_node *np = mcbsp->dev->of_node;
> + int i;
> +
> + if (np)
> + mcbsp->dai_count = of_graph_get_endpoint_count(np);
> +
> + if (!mcbsp->dai_count)
> + mcbsp->dai_count = 1;
> +
> + mcbsp->dais = devm_kcalloc(mcbsp->dev, mcbsp->dai_count,
> + sizeof(*mcbsp->dais), GFP_KERNEL);
> + if (!mcbsp->dais)
> + return -ENOMEM;
> +
> + for (i = 0; i < mcbsp->dai_count; i++) {
> + struct snd_soc_dai_driver *dai = &mcbsp->dais[i];
> +
> + dai->name = devm_kasprintf(mcbsp->dev, GFP_KERNEL, "%s-dai%i",
> + dev_name(mcbsp->dev), i);
> +
> + if (i == 0) {
> + dai->probe = omap_mcbsp_probe;
> + dai->remove = omap_mcbsp_remove;
> + dai->ops = &mcbsp_dai_ops;
> + }
> + dai->playback.channels_min = 1;
> + dai->playback.channels_max = 16;
> + dai->playback.rates = OMAP_MCBSP_RATES;
> + if (mcbsp->pdata->reg_size == 2)
> + dai->playback.formats = SNDRV_PCM_FMTBIT_S16_LE;
> + else
> + dai->playback.formats = SNDRV_PCM_FMTBIT_S16_LE |
> + SNDRV_PCM_FMTBIT_S32_LE;
> + dai->capture.channels_min = 1;
> + dai->capture.channels_max = 16;
> + dai->capture.rates = OMAP_MCBSP_RATES;
> + if (mcbsp->pdata->reg_size == 2)
> + dai->capture.formats = SNDRV_PCM_FMTBIT_S16_LE;
> + else
> + dai->capture.formats = SNDRV_PCM_FMTBIT_S16_LE |
> + SNDRV_PCM_FMTBIT_S32_LE;
I prefer to have the 'if (mcbsp->pdata->reg_size == 2)' grouped for
playback and capture in one place.
> + }
> +
> + return 0;
> +}
>
> static const struct snd_soc_component_driver omap_mcbsp_component = {
> .name = "omap-mcbsp",
> @@ -1423,18 +1454,17 @@ static int asoc_mcbsp_probe(struct platform_device *pdev)
> mcbsp->dev = &pdev->dev;
> platform_set_drvdata(pdev, mcbsp);
>
> - ret = omap_mcbsp_init(pdev);
> + ret = omap_mcbsp_init_dais(mcbsp);
> if (ret)
> return ret;
>
> - if (mcbsp->pdata->reg_size == 2) {
> - omap_mcbsp_dai.playback.formats = SNDRV_PCM_FMTBIT_S16_LE;
> - omap_mcbsp_dai.capture.formats = SNDRV_PCM_FMTBIT_S16_LE;
> - }
> + ret = omap_mcbsp_init(pdev);
> + if (ret)
> + return ret;
>
> ret = devm_snd_soc_register_component(&pdev->dev,
> &omap_mcbsp_component,
> - &omap_mcbsp_dai, 1);
> + mcbsp->dais, mcbsp->dai_count);
> if (ret)
> return ret;
>
>
- Péter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
