On 12/3/18 10:53 AM, Ayman Bagabas wrote: > This driver adds support for missing hotkeys on some Huawei laptops. > Laptops such as the Matebook X have non functioning hotkeys. Whereas > newer laptops such as the Matebook X Pro come with working hotkeys out > of the box. > > Old laptops, such as the Matebook X, report hotkey events through ACPI > device "\WMI0". However, new laptops, such as the Matebook X Pro, > does not have this WMI device. > > All the hotkeys on the Matebook X Pro work fine > without this patch except (micmute, wlan, and huawei key). These keys > and the brightness keys report events to "\AMW0" ACPI device. One > problem is that brightness keys on the Matebook X Pro work without this > patch. This results in reporting two brightness key press > events one is captured by ACPI and another by this driver. > > A solution would be to check if such event came from the "\AMW0" WMI driver > then skip reporting event. Another solution would be to leave this to > user-space to handle. Which can be achieved by using "hwdb" tables and > remap those keys to "unknown". This solution seems more natural to me > because it leaves the decision to user-space. > > Signed-off-by: Ayman Bagabas <ayman.bagabas@xxxxxxxxx> > --- > drivers/platform/x86/Kconfig | 16 +++ > drivers/platform/x86/Makefile | 1 + > drivers/platform/x86/huawei-wmi.c | 226 ++++++++++++++++++++++++++++++ > 3 files changed, 243 insertions(+) > create mode 100644 drivers/platform/x86/huawei-wmi.c > > diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig > index 87f70e8f4dd0..27db3ce7a1e1 100644 > --- a/drivers/platform/x86/Kconfig > +++ b/drivers/platform/x86/Kconfig > @@ -1292,6 +1292,22 @@ config INTEL_ATOMISP2_PM > To compile this driver as a module, choose M here: the module > will be called intel_atomisp2_pm. > > +config HUAWEI_WMI > + tristate "Huawei WMI hotkeys driver" > + depends on ACPI_WMI > + depends on INPUT > + select INPUT_SPARSEKMAP > + select LEDS_CLASS but LEDS_CLASS is only available if NEW_LEDS is set/enabled, so it either depends on LEDS_CLASS... or it needs to select NEW_LEDS, which is what other drivers in this Kconfig file do, even though our b.d. has said a few times that any one driver should not "select" => enable an entire subsystem, so they all should be "depends on NEW_LEDS" IMHO. > + select LEDS_TRIGGERS > + select LEDS_TRIGGER_AUDIO > + help > + This driver provides support for Huawei WMI hotkeys. > + It enables the missing keys and adds support to the micmute > + LED found on some of these laptops. > + > + To compile this driver as a module, choose M here: the module > + will be called huawei-wmi. > + > endif # X86_PLATFORM_DEVICES > > config PMC_ATOM -- ~Randy _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel