On Mon, Dec 03, 2018 at 12:23:11AM +0300, Mesih Kilinc wrote: > DMA of Allwinner suniv F1C100s is similar to sun4i. It has 4 NDMA, 4 > DDMA channels and endpoints are different. Also F1C100s has reset bit > for DMA in CCU. Add support for it. > > Signed-off-by: Mesih Kilinc <mesihkilinc@xxxxxxxxx> > --- > drivers/dma/Kconfig | 4 ++-- > drivers/dma/sun4i-dma.c | 60 +++++++++++++++++++++++++++++++++++++++++++++++++ > 2 files changed, 62 insertions(+), 2 deletions(-) > > diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig > index de511db..f8a65d2 100644 > --- a/drivers/dma/Kconfig > +++ b/drivers/dma/Kconfig > @@ -163,8 +163,8 @@ config DMA_SA11X0 > > config DMA_SUN4I > tristate "Allwinner A10 DMA SoCs support" > - depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I > - default (MACH_SUN4I || MACH_SUN5I || MACH_SUN7I) > + depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUNIV > + default (MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUNIV) > select DMA_ENGINE > select DMA_VIRTUAL_CHANNELS > help > diff --git a/drivers/dma/sun4i-dma.c b/drivers/dma/sun4i-dma.c > index d267ff9..c0452c9 100644 > --- a/drivers/dma/sun4i-dma.c > +++ b/drivers/dma/sun4i-dma.c > @@ -36,7 +36,11 @@ > #define SUN4I_DMA_CFG_SRC_ADDR_MODE(mode) ((mode) << 5) > #define SUN4I_DMA_CFG_SRC_DRQ_TYPE(type) (type) > > +#define SUNIV_DMA_CFG_DST_DATA_WIDTH(width) ((width) << 24) > +#define SUNIV_DMA_CFG_SRC_DATA_WIDTH(width) ((width) << 8) > + > #define SUN4I_MAX_BURST 8 > +#define SUNIV_MAX_BURST 4 > > /** Normal DMA register values **/ > > @@ -44,6 +48,9 @@ > #define SUN4I_NDMA_DRQ_TYPE_SDRAM 0x16 > #define SUN4I_NDMA_DRQ_TYPE_LIMIT (0x1F + 1) > > +#define SUNIV_NDMA_DRQ_TYPE_SDRAM 0x11 > +#define SUNIV_NDMA_DRQ_TYPE_LIMIT (0x17 + 1) Also, you're not using that define anywhere > + > /** Normal DMA register layout **/ > > /* Dedicated DMA source/destination address mode values */ > @@ -57,6 +64,9 @@ > #define SUN4I_NDMA_CFG_BYTE_COUNT_MODE_REMAIN BIT(15) > #define SUN4I_NDMA_CFG_SRC_NON_SECURE BIT(6) > > +#define SUNIV_NDMA_CFG_CONT_MODE BIT(29) > +#define SUNIV_NDMA_CFG_WAIT_STATE(n) ((n) << 26) > + Or those two. > /** Dedicated DMA register values **/ > > /* Dedicated DMA source/destination address mode values */ > @@ -69,6 +79,9 @@ > #define SUN4I_DDMA_DRQ_TYPE_SDRAM 0x1 > #define SUN4I_DDMA_DRQ_TYPE_LIMIT (0x1F + 1) > > +#define SUNIV_DDMA_DRQ_TYPE_SDRAM 0x1 This is the same value > +#define SUNIV_DDMA_DRQ_TYPE_LIMIT (0x9 + 1) > + And this one isn't used > /** Dedicated DMA register layout **/ > > /* Dedicated DMA configuration register layout */ > @@ -122,6 +135,11 @@ > #define SUN4I_DMA_NR_MAX_VCHANS \ > (SUN4I_NDMA_NR_MAX_VCHANS + SUN4I_DDMA_NR_MAX_VCHANS) > > +#define SUNIV_NDMA_NR_MAX_CHANNELS 4 > +#define SUNIV_DDMA_NR_MAX_CHANNELS 4 > +#define SUNIV_NDMA_NR_MAX_VCHANS (24 * 2 - 1) > +#define SUNIV_DDMA_NR_MAX_VCHANS 10 > + I'm not sure we need those, you can just use the raw value in the structure. Also, how was the number of vchans calculated? Maxime -- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
Attachment:
signature.asc
Description: PGP signature
_______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
