> Once when it's confirmed to work from user-space, we can think of the
> kernel-side implementation, too. Instead of setting up the whole
> complex i2c subsystem, we may wire up the existing stuff in
> sound/i2c/*, too.
>
Okay
You should try to initialize over i2c over HD-audio GPIO pins using a
> user-space program at first. The GPIO pins can be read/written via
> hda-verb as I already mentioned, hence you can access to i2c bus from
> the user-space directly.
I have written the following bash script,
> #!/bin/bash
> # DIR 0 (low) = out 40 (high) = in
> # low to write, high to read
> # SCL == 0x40 SDA == 0x80
> function send() {
> str1=$1
> str2=$2
> str3=$3
> hda-verb /dev/snd/hwC0D0 0x01 SET_GPIO_MASK 0x$str1
> # we send 0 to bus by enabling gpio_dir
> hda-verb /dev/snd/hwC0D0 0x01 SET_GPIO_DIR 0x$str2
> # we send data=0 to send to the bus
> hda-verb /dev/snd/hwC0D0 0x01 SET_GPIO_DATA 0x$str3
> }
> # reads the values I set, no different return value from i2c/codec
> function recv() {
> hda-verb /dev/snd/hwC0D0 0x01 GET_GPIO_MASK 0x$str1
> hda-verb /dev/snd/hwC0D0 0x01 GET_GPIO_DIR 0x$str2
> hda-verb /dev/snd/hwC0D0 0x01 GET_GPIO_DATA 0x$str3
> }
>
>
> function send_sequence() {
> data=$1
> #split hexes by coma to be able to send 1 by 1
> hexes=$(echo $data|tr "," "\n")
> for hex in $hexes; do
> echo 'sending hex: ' $hex
> send 40 0 0 # 0 to scl
>
mask of SCL enabled, data 0 , dir 0, is that correct ?
> sleep 0.003
> send 80 0 $hex # send 0x28 to sda if $hex=28
>
mask of SDA enabled, direction 0, hex to data
> sleep 0.003
> send 0 40 40 # 1 to scl
>
mask of SCL disabled, direction 1, data 1
> sleep 0.003
> echo sent
> done
> }
>
below i'm sending the hexes from Win10ini but in the exact same order,
which worries me a bit, maybe they need to be reversed 4by4?
like 01,90,02,00,11,01,02 could become: 00,02,90,01,02,01,11 .. because for
the InitVerbs i did that reversing 4by4 and it works only correctly if the
hexes are reversed 4by4. (at the end of the email i am attaching the
exitverbs conversion which is perfect).
> #initi2c
> send_sequence
> "01,90,3a,00,10,10,b0,00,1d,01,00,02,06,00,11,07,01,00,10,09,02,07,03,00,12,01,00,08,13,05,ff,06,00,07,20,02,0d,00,2a,02,02,03,00,04,00,05,02,06,00,07,20,08,02,09,00,0a,80,0b,02,0c,00,0d,a0,01,0c,00,29,02,01,03,02,04,00,05,00,01,01,00,11,01,0a,02,84,00,23,01,00,03,00,02,3f,00,20,01,03,00,1b,75,b6,73,c2,00,11,29,01,21,f3,03,20,05,00,12,00,13,80,00,1c,03,c0"
> #streamstarti2c
> send_sequence "01,90,02,00,11,01,02"
> #powerup-amps
> send_sequence "04,28,2a,2c,2e,07,00,81,01,11,02,32,03,48,04,11,05,10,00,80"
> send_sequence "01,28,01,05,00,01,2a,01,05,02,01,2c,01,05,01,01,2e,01,05,03"
> #streamstopi2c
> send_sequence "01,90,02,00,11,01,0a"
> #echo read
> #recv 0 0 0
>
For example something that works is
"ExitVerbs"=hex:00,05,17,00,01,00,75,04,00,00,74,04,82,00,75,04,00,00,74,04,03,\
00,75,04,00,80,74,04,04,00,75,04,01,28,74,04,06,00,75,04,00,80,74,04,07,00,\
75,04,01,28,74,04,65,00,75,04,00,00,74,04,00,03,77,04,03,05,17,00
> hda-verb /dev/snd/hwC0D0 0x01 0x705 0x00
> hda-verb /dev/snd/hwC0D0 0x47 0x500 0x01
> hda-verb /dev/snd/hwC0D0 0x47 0x400 0x00
> hda-verb /dev/snd/hwC0D0 0x47 0x500 0x82
> hda-verb /dev/snd/hwC0D0 0x47 0x400 0x00
> hda-verb /dev/snd/hwC0D0 0x47 0x500 0x03
> hda-verb /dev/snd/hwC0D0 0x47 0x480 0x00
> hda-verb /dev/snd/hwC0D0 0x47 0x500 0x04
> hda-verb /dev/snd/hwC0D0 0x47 0x428 0x01
> hda-verb /dev/snd/hwC0D0 0x47 0x500 0x06
> hda-verb /dev/snd/hwC0D0 0x47 0x480 0x00
> hda-verb /dev/snd/hwC0D0 0x47 0x500 0x07
> hda-verb /dev/snd/hwC0D0 0x47 0x428 0x01
> hda-verb /dev/snd/hwC0D0 0x47 0x500 0x65
> hda-verb /dev/snd/hwC0D0 0x47 0x400 0x00
> hda-verb /dev/snd/hwC0D0 0x47 0x703 0x00
> hda-verb /dev/snd/hwC0D0 0x01 0x705 0x03
>
> Also InitVerbs from windows10ini and ExitVerbs from windows10ini reversed
hexes 4by4 sent with hda-verb work perfect. They initiate the CS8409 codec
or shut it down properly as i can see in the codec#0 status changing from
D3 to D0 and D0 to D3.
But the above exitverbs are sent to the widgets AFG node and the 0x47
widget, (InitVerbs have a few more widgets).
I tried to do the same for the InitI2C hexes, but apperently they are not
supposed to be send as hexes directly to the widgets like InitVerbs or
ExitVerbs. All the I2C related stuff are strictly I2C related for executing
on the SDA/SCL GPIO7/6.
So my idea is, do I need to reverse the hexes 4 by 4, when sending to the
SDA ?
And if you have any examples how can i get a read value from the SDA please.
Btw:
root@debian:~# cat /proc/asound/card0/codec#0 |head -n 25|tail -n 8
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[7]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
the default values are IO7 which is GPIO7 which is SDA. is enabled=0 dir=0
data=0
root@debian:~# hda-verb /dev/snd/hwC0D0 0x01 SET_GPIO_MASK 0x80
nid = 0x1, verb = 0x716, param = 0x80
value = 0x0
root@debian:~# hda-verb /dev/snd/hwC0D0 0x01 SET_GPIO_DIR 0x0
nid = 0x1, verb = 0x717, param = 0x0
value = 0x0
root@debian:~# hda-verb /dev/snd/hwC0D0 0x01 SET_GPIO_DATA 0x28
nid = 0x1, verb = 0x715, param = 0x28
value = 0x0
After i send the above, data becomes data=1 but i sent 0x28.
root@debian:~# cat /proc/asound/card0/codec#0 |head -n 25|tail -n 8
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[5]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[6]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[7]: enable=1, dir=0, wake=0, sticky=0, data=1, unsol=0
But if i read GPIO_DATA,
root@debian:~# hda-verb /dev/snd/hwC0D0 0x01 GET_GPIO_DATA 0x0
nid = 0x1, verb = 0xf15, param = 0x0
value = 0x80
the value returned is 0x80.
Which leads me to the idea the only type of data you can send is either
0x40 for 1 on SCL, 0x80 for 1 on SDA, or 0x00 for 0 on both( if you enable
mask of SCL it will send 0 to SCL only, and if you enable mask of SDA it
will send 0 to SDA only).
If thats true, you can only send 0/1 to the GPIOs, which means if i have to
send the address of 1st SSM3515 "0x28", I have to send it as "101000" to
the SDA.
How could I try to read register 0x00 of I2C address 0x28 (one of the four
SSM3515 amplifier) ? It should return value 0x83 according to the
documentation of SSM3515 as a "reset value for register 0x00".
If it is true that I can read data with GET_GPIO_DATA will it return as
well only one bit of data like 0/1 at a time? If I need get a value of
0x83 thru the GPIO7 its binary value should be 10000011 , so this means
that If i execute GET_GPIO_DATA 8 times in a row i will receive this
piece by piece 1, 0 , 0 , 0 , 0 , 0 , 1, 1. Meanwhile I try to execute 8
times GET_GPIO_DATA should i be sending to the SCL (GPIO6) each time a
clock value 0 ? or also a SET_GPIO_DATA value to the GPIO7 with value 0 for
reading?
Please advise.
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
