On Thu, Nov 22, 2018 at 11:48 PM Maxime Ripard <maxime.ripard@xxxxxxxxxxx> wrote: > > On Thu, Nov 22, 2018 at 11:41:57PM +0800, Chen-Yu Tsai wrote: > > On Thu, Nov 22, 2018 at 11:33 PM Maxime Ripard > > <maxime.ripard@xxxxxxxxxxx> wrote: > > > > > > On Thu, Nov 22, 2018 at 06:23:18PM +0800, Chen-Yu Tsai wrote: > > > > On the Allwinner A64 SoC, the audio codec has a built-in headphone > > > > amplifier. This amplifier has a power supply separate from the rest of > > > > the analog audio circuitry. > > > > > > > > Add a regulator supply property to handle this. > > > > > > > > Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx> > > > > --- > > > > Documentation/devicetree/bindings/sound/sun50i-codec-analog.txt | 2 ++ > > > > 1 file changed, 2 insertions(+) > > > > > > > > diff --git a/Documentation/devicetree/bindings/sound/sun50i-codec-analog.txt b/Documentation/devicetree/bindings/sound/sun50i-codec-analog.txt > > > > index 4f8ad0e04d20..056a098495cc 100644 > > > > --- a/Documentation/devicetree/bindings/sound/sun50i-codec-analog.txt > > > > +++ b/Documentation/devicetree/bindings/sound/sun50i-codec-analog.txt > > > > @@ -4,9 +4,11 @@ Required properties: > > > > - compatible: must be one of the following compatibles: > > > > - "allwinner,sun50i-a64-codec-analog" > > > > - reg: must contain the registers location and length > > > > +- cpvdd-supply: Regulator supply for the headphone amplifier > > > > > > I guess we should make this optional, since even if it's missing, it's > > > going to create a dummy regulator. and that allows to have backward > > > compatibility. > > > > > > For the rest of the series, > > > Acked-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxx> > > > > This one (not sun8i-codec-analog) is new for the next release, so there's > > no backward compatibility to consider. Plus none of the device tree changes > > for A64 have been merged. > > Ok, that works for me then. Well, I misspoke. The driver was introduced in 4.20-rc1, and these changes will end up in 4.21. But again, since we don't have any device tree changes already merged, we should be fine. Implementation wise, there really isn't a "required" variant of the regulator API. The API will use the dummy regulator if it's missing. ChenYu _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
