On Wed, 14 Nov 2018, Clément Péron wrote: > > > The AK4118A is a digital audio transceiver supporting 8 input channels > > > at 192kHz and with 24bits resolution. > > > It converts the S/PDIF signal to I2S format and is configurable over I2C. > > > > > > This driver introduce a minimal support of the AK4118, like selecting the > > > input channel, reading input frequency and detecting some errors. > > > > I'm curious, from what it seems, there is no checking that the input > > sample rate actually matches the configured sample rate? It's perfectly > > understandable for a driver which has 'minimal support', but it's > > something a user must be aware of; for instance if someone does > > > > arecord -r 48000 output.wav > > > > when the input data actually has a rate of 44100 Hz then the file will be > > written with a header specifying 44100 Hz but the data will actually be > > 48000 Hz. > > > > It's not an objection on my part, just an observation. I don't know how > > ALSA could enforce this in any way; ideally (barring automatic sample rate > > conversion) one would want an error message that the sample rate specified > > when opening the stream does not match the sample rate of the S/PDIF input > > data. > > I'm quite new with linux audio driver but adding in ak4118_hw_params a > check like if params_rate(params) == ak4118_rate should do the job no It will if the SPDIF stream is already running when the driver is started up, but if for some reason the sample rate changes or the SPDIF source is not transmitting anything when the stream is started it won't work to do it hw_params. A changing sample rate might be an unusual usecase, but one could imagine having an SPDIF source which is silent (e.g. not even plugged in) when the stream is set up. Like I said, it might not be a problem in many applications. And I'm not really sure how to solve it. Perhaps someone else knows. ALSA likes to be in control of parameters such as the sample rate, but it can't with an external device controlling the sample rate of the SPDIF receiver. /Ricard -- Ricard Wolf Wanderlof ricardw(at)axis.com Axis Communications AB, Lund, Sweden www.axis.com Phone +46 46 272 2016 Fax +46 46 13 61 30 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
