On certain platforms, Display HDMI HDA codec was not going to sleep state after the use when links are powered down after turning off the display power. As per the HW recommendation, links are powered down before turning off the display power to ensure that the codec goes to sleep state. This patch was updated from an earlier version submitted upstream [1] which conflicted with the changes merged for HDaudio codec support with the Intel DSP. [1] https://patchwork.kernel.org/patch/10540213/ Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@xxxxxxxxx> Signed-off-by: Sanyog Kale <sanyog.r.kale@xxxxxxxxx> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx> --- v2: fix copy/paste in error handling. sound/soc/codecs/hdac_hdmi.c | 11 +++++------ sound/soc/intel/skylake/skl.c | 12 ++++++------ 2 files changed, 11 insertions(+), 12 deletions(-) diff --git a/sound/soc/codecs/hdac_hdmi.c b/sound/soc/codecs/hdac_hdmi.c index 4e9854889a95..e63d6e33df48 100644 --- a/sound/soc/codecs/hdac_hdmi.c +++ b/sound/soc/codecs/hdac_hdmi.c @@ -2187,11 +2187,6 @@ static int hdac_hdmi_runtime_suspend(struct device *dev) */ snd_hdac_codec_read(hdev, hdev->afg, 0, AC_VERB_SET_POWER_STATE, AC_PWRST_D3); - err = snd_hdac_display_power(bus, false); - if (err < 0) { - dev_err(dev, "Cannot turn on display power on i915\n"); - return err; - } hlink = snd_hdac_ext_bus_get_link(bus, dev_name(dev)); if (!hlink) { @@ -2201,7 +2196,11 @@ static int hdac_hdmi_runtime_suspend(struct device *dev) snd_hdac_ext_bus_link_put(bus, hlink); - return 0; + err = snd_hdac_display_power(bus, false); + if (err < 0) + dev_err(dev, "Cannot turn off display power on i915\n"); + + return err; } static int hdac_hdmi_runtime_resume(struct device *dev) diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c index ebab04b51bc1..ac0b4ff21acc 100644 --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -811,6 +811,12 @@ static void skl_probe_work(struct work_struct *work) } } + /* + * we are done probing so decrement link counts + */ + list_for_each_entry(hlink, &bus->hlink_list, list) + snd_hdac_ext_bus_link_put(bus, hlink); + if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI)) { err = snd_hdac_display_power(bus, false); if (err < 0) { @@ -820,12 +826,6 @@ static void skl_probe_work(struct work_struct *work) } } - /* - * we are done probing so decrement link counts - */ - list_for_each_entry(hlink, &bus->hlink_list, list) - snd_hdac_ext_bus_link_put(bus, hlink); - /* configure PM */ pm_runtime_put_noidle(bus->dev); pm_runtime_allow(bus->dev); -- 2.17.1 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
