On Wed, 07 Nov 2018 09:44:25 +0100, Geert Uytterhoeven wrote: > > Hi Iwai-san, > > On Tue, Nov 6, 2018 at 5:18 PM Takashi Iwai <tiwai@xxxxxxx> wrote: > > On Tue, 06 Nov 2018 02:04:47 +0100, > > Randy Dunlap wrote: > > > > > > On 11/5/18 2:12 PM, Geert Uytterhoeven wrote: > > > > On Mon, Nov 5, 2018 at 11:07 PM Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> wrote: > > > >> Below is the list of build error/warning regressions/improvements in > > > >> v4.20-rc1[1] compared to v4.19[2]. > > > >> > > > >> Summarized: > > > >> - build errors: +3/-0 > > > >> - build warnings: +449/-2712 > > > >> > > > >> Happy fixing! ;-) > > > >> > > > >> Thanks to the linux-next team for providing the build service. > > > >> > > > >> [1] http://kisskb.ellerman.id.au/kisskb/branch/linus/head/651022382c7f8da46cb4872a545ee1da6d097d2a/ (all 240 configs) > > > >> [2] http://kisskb.ellerman.id.au/kisskb/branch/linus/head/84df9525b0c27f3ebc2ebb1864fa62a97fdedb7d/ (all 240 configs) > > > >> > > > >> > > > >> *** ERRORS *** > > > >> > > > >> + /kisskb/src/sound/pci/hda/patch_ca0132.c: error: implicit declaration of function 'pci_iomap' [-Werror=implicit-function-declaration]: => 8799:3 > > > > > > > > sh4-all{mod,yes}config > > > > > > > > Looks like d9b84a15892c0233 ("ALSA: hda: Fix implicit definition of > > > > pci_iomap() on SH") > > > > is not sufficient? > > > > > > Different problem. This is about "select": > > > > > > config SND_SOC_ALL_CODECS > > > tristate "Build all ASoC CODEC drivers" > > > > > > That enables (sets): > > > select SND_SOC_HDAC_HDA > > > which selects SND_HDA even though CONFIG_PCI is not enabled. > > > > Actually it is OK to enable CONFIG_SND_HDA_CODEC_CA0132 without > > CONFIG_PCI. IIRC, there was a system like that, too. > > The commit above should have covered the build failure on SH, but > > apparently isn't enough for some arch setups, as it seems. > > > > The cause is clear now: pci_iomap() is defined in > > asm-generic/pci_iomap.h only when CONFIG_GENERIC_PCI_IOMAP is > > defined. Including asm/io.h doesn't help unless CONFIG_PCI is set. > > > > Below is a quick fix for this. > > > > > > thanks, > > > > Takashi > > > > -- 8< -- > > > > From: Takashi Iwai <tiwai@xxxxxxx> > > Subject: [PATCH] ALSA: hda/ca0132 - Yet more fix on build breakage without PCI > > support > > > > The recent change in CA0132 codec driver for supporting more > > Creative boards includes the pci_iomap() call to get the extra > > register accesses. This is supposed to work on all archs and setups, > > by the implicit assumption that every arch would provide a dummy > > function returning NULL when no PCI is available. But the reality > > bites, of course; as Geert's regular build test shows, some configs > > (at least SH4 without CONFIG_PCI) leads to a build error due to the > > implicit function declaration. > > > > So this is another attempt to fix the issue: now we add an ifdef > > CONFIG_PCI line, so that pci_iomap() won't be called unless PCI is > > really usable. This should fall back to the standard quirk again with > > a warning. > > > > Fixes: d9b84a15892c0233 ("ALSA: hda: Fix implicit definition of pci_iomap() on SH") > > Reported-by: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> > > Cc: <stable@xxxxxxxxxxxxxxx> > > Signed-off-by: Takashi Iwai <tiwai@xxxxxxx> > > Thanks for your patch! > > > --- a/sound/pci/hda/patch_ca0132.c > > +++ b/sound/pci/hda/patch_ca0132.c > > @@ -8796,7 +8796,13 @@ static int patch_ca0132(struct hda_codec *codec) > > } > > > > if (spec->use_pci_mmio) { > > + /* > > + * ifdef below needed due to lack of pci_iomap() decleration > > + * for some archs when no PCI is defined > > + */ > > +#ifdef CONFIG_PCI > > spec->mem_base = pci_iomap(codec->bus->pci, 2, 0xC20); > > +#endif > > I'm sorry, but that is not a proper fix. > This should be fixed in the SH-specific code, to behave like other > architectures. OK, this is the thing I didn't want to go deeply, as the problem is messy... The top of iceberg is that asm/pci_iomap.h defines the dummy function of pci_iomap() only when CONFIG_PCI=n && CONFIG_GENERIC_PCI_IOMAP=y. This has been so for long time since the commit 97a29d59fc22 [PARISC] fix compile break caused by iomap: make IOPORT/PCI mapping function s conditional Before that point, the header defined pci_iomap() and pci_ioumap() whenever CONFIG_PCi=n. And, looking at other arch codes, most of them define CONFIG_GENERIC_PCI_IOMAP no matter whether CONFIG_PCI is set or not. Actually this is supposedly OK, as the generic code (lib/pci_iomap.c) contains a large ifdef CONFIG_PCI in it, so essentially it's empty when CONFIG_PCI=n. So, one possible fix would be to convert all fallout archs (alpha, powerpc and sh) to define always CONFIG_GENERIC_PCI_IOMAP. I'm not 100% sure whether this is safe, but we may try. Another fix would be to revert the commit 97a29d59fc22, and let asm/pci_iomap.h providing the dummy functions whenever CONFIG_PCi=n. Along with it, we need to fix the arch side, the duplicated (and useless) definitions in arch/parisc/lib/iomap.c. Through a quick look, arch/sparc also has the pci_iounmap() definition without CONFIG_PCI check, so this needs to be fixed as well. And, what makes the situation messy is that the handling of pci_iounmap() is totally different from pci_iomap(). pci_iomap() is covered by CONFIG_GENERIC_PCI_IOMAP while pci_iounmap() is by CONFIG_GENERIC_IOMAP. And, yet there are multiple dummy function definitions of pci_iounmap(). Once in include/asm-generic/iomap.h, and once in include/asm-generic/io.h. Overall, there are a few rooms of cleanups / fixes, yeah. thanks, Takashi _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
