Add regulator support to turn on cpvdd and avdd in probe.
If a regulator is not given from device tree, a dummy regulator will be
used.
Signed-off-by: Cheng-Yi Chiang <cychiang@xxxxxxxxxxxx>
---
sound/soc/codecs/rt5663.c | 68 +++++++++++++++++++++++++++++++++++----
1 file changed, 61 insertions(+), 7 deletions(-)
diff --git a/sound/soc/codecs/rt5663.c b/sound/soc/codecs/rt5663.c
index 2444fad7c2dfe..7e9c1901a0a67 100644
--- a/sound/soc/codecs/rt5663.c
+++ b/sound/soc/codecs/rt5663.c
@@ -17,6 +17,7 @@
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/acpi.h>
+#include <linux/regulator/consumer.h>
#include <linux/workqueue.h>
#include <sound/core.h>
#include <sound/pcm.h>
@@ -33,6 +34,9 @@
#define RT5663_DEVICE_ID_2 0x6451
#define RT5663_DEVICE_ID_1 0x6406
+#define RT5663_POWER_ON_DELAY_MS 300
+#define RT5663_SUPPLY_CURRENT_UA 500000
+
enum {
CODEC_VER_1,
CODEC_VER_0,
@@ -48,6 +52,11 @@ struct impedance_mapping_table {
unsigned int dc_offset_r_manual_mic;
};
+static const char *const rt5663_supply_names[] = {
+ "avdd",
+ "cpvdd",
+};
+
struct rt5663_priv {
struct snd_soc_component *component;
struct rt5663_platform_data pdata;
@@ -56,6 +65,7 @@ struct rt5663_priv {
struct snd_soc_jack *hs_jack;
struct timer_list btn_check_timer;
struct impedance_mapping_table *imp_table;
+ struct regulator_bulk_data supplies[ARRAY_SIZE(rt5663_supply_names)];
int codec_ver;
int sysclk;
@@ -3480,7 +3490,7 @@ static int rt5663_i2c_probe(struct i2c_client *i2c,
{
struct rt5663_platform_data *pdata = dev_get_platdata(&i2c->dev);
struct rt5663_priv *rt5663;
- int ret;
+ int ret, i;
unsigned int val;
struct regmap *regmap;
@@ -3497,6 +3507,37 @@ static int rt5663_i2c_probe(struct i2c_client *i2c,
else
rt5663_parse_dp(rt5663, &i2c->dev);
+ for (i = 0; i < ARRAY_SIZE(rt5663->supplies); i++)
+ rt5663->supplies[i].supply = rt5663_supply_names[i];
+
+ ret = devm_regulator_bulk_get(&i2c->dev,
+ ARRAY_SIZE(rt5663->supplies),
+ rt5663->supplies);
+ if (ret) {
+ dev_err(&i2c->dev, "Failed to request supplies: %d\n", ret);
+ return ret;
+ }
+
+ /* Set load for regulator. */
+ for (i = 0; i < ARRAY_SIZE(rt5663->supplies); i++) {
+ ret = regulator_set_load(rt5663->supplies[i].consumer,
+ RT5663_SUPPLY_CURRENT_UA);
+ if (ret) {
+ dev_err(&i2c->dev,
+ "Failed to set regulator %s, ret: %d\n",
+ rt5663->supplies[i].supply, ret);
+ }
+ }
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(rt5663->supplies),
+ rt5663->supplies);
+
+ if (ret) {
+ dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret);
+ return ret;
+ }
+ msleep(RT5663_POWER_ON_DELAY_MS);
+
regmap = devm_regmap_init_i2c(i2c, &temp_regmap);
if (IS_ERR(regmap)) {
ret = PTR_ERR(regmap);
@@ -3527,7 +3568,8 @@ static int rt5663_i2c_probe(struct i2c_client *i2c,
dev_err(&i2c->dev,
"Device with ID register %#x is not rt5663\n",
val);
- return -ENODEV;
+ ret = -ENODEV;
+ goto err_enable;
}
if (IS_ERR(rt5663->regmap)) {
@@ -3632,20 +3674,30 @@ static int rt5663_i2c_probe(struct i2c_client *i2c,
ret = request_irq(i2c->irq, rt5663_irq,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING
| IRQF_ONESHOT, "rt5663", rt5663);
- if (ret)
+ if (ret) {
dev_err(&i2c->dev, "%s Failed to reguest IRQ: %d\n",
__func__, ret);
+ goto err_enable;
+ }
}
ret = devm_snd_soc_register_component(&i2c->dev,
&soc_component_dev_rt5663,
rt5663_dai, ARRAY_SIZE(rt5663_dai));
- if (ret) {
- if (i2c->irq)
- free_irq(i2c->irq, rt5663);
- }
+ if (ret)
+ goto err_irq;
+ return 0;
+
+err_irq:
+ if (i2c->irq)
+ free_irq(i2c->irq, rt5663);
+
+err_enable:
+ dev_err(&i2c->dev,
+ "%s: Disable regulator after probe error\n", __func__);
+ regulator_bulk_disable(ARRAY_SIZE(rt5663->supplies), rt5663->supplies);
return ret;
}
@@ -3656,6 +3708,8 @@ static int rt5663_i2c_remove(struct i2c_client *i2c)
if (i2c->irq)
free_irq(i2c->irq, rt5663);
+ regulator_bulk_disable(ARRAY_SIZE(rt5663->supplies), rt5663->supplies);
+
return 0;
}
--
2.19.1.568.g152ad8e336-goog
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
