Re: [PATCH v2] ASoC: sun4i-i2s: move code from startup/shutdown hooks into pm_runtime hooks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Oct 17, 2018 at 08:36:26AM -0700, Vasily Khoruzhick wrote:
> On Wednesday, October 17, 2018 8:25:23 AM PDT Maxime Ripard wrote:
> > On Wed, Oct 17, 2018 at 07:41:55AM -0700, Vasily Khoruzhick wrote:
> > > On Wed, Oct 17, 2018 at 12:45 AM Maxime Ripard
> > > 
> > > <maxime.ripard@xxxxxxxxxxx> wrote:
> > > > On Tue, Oct 16, 2018 at 08:08:41PM -0700, Vasily Khoruzhick wrote:
> > > > > On Tue, Oct 16, 2018 at 12:16 AM Maxime Ripard
> > > > > 
> > > > > <maxime.ripard@xxxxxxxxxxx> wrote:
> > > > > > On Mon, Oct 15, 2018 at 08:11:41PM -0700, Vasily Khoruzhick wrote:
> > > > > > > startup() and shutdown() hooks are called for both substreams,
> > > > > > > so stopping either substream when another is running breaks the
> > > > > > > latter.
> > > > > > > 
> > > > > > > E.g. playback breaks if capture is stopped when playback is
> > > > > > > running.
> > > > > > > 
> > > > > > > Move code from startup() and shutdown() to resume() and suspend()
> > > > > > > hooks respectively to fix this issue
> > > > > > > 
> > > > > > > Signed-off-by: Vasily Khoruzhick <anarsoul@xxxxxxxxx>
> > > > > > > ---
> > > > > > > v2: - rename from "ASoC: sun4i-i2s: don't try to start up
> > > > > > > 
> > > > > > >                  or shut down DAI if it's active"
> > > > > > >     
> > > > > > >     - move code from startup/shutdown hooks into pm_runtime
> > > > > > >  
> > > > > > >  sound/soc/sunxi/sun4i-i2s.c | 61
> > > > > > >  +++++++++++++++----------------------
> > > > > > >  1 file changed, 25 insertions(+), 36 deletions(-)
> > > > > > > 
> > > > > > > diff --git a/sound/soc/sunxi/sun4i-i2s.c
> > > > > > > b/sound/soc/sunxi/sun4i-i2s.c
> > > > > > > index a4aa931ebfae..daa6c08cffbc 100644
> > > > > > > --- a/sound/soc/sunxi/sun4i-i2s.c
> > > > > > > +++ b/sound/soc/sunxi/sun4i-i2s.c
> > > > > > > @@ -644,40 +644,6 @@ static int sun4i_i2s_trigger(struct
> > > > > > > snd_pcm_substream *substream, int cmd,> > > > > 
> > > > > > >       return 0;
> > > > > > >  
> > > > > > >  }
> > > > > > > 
> > > > > > > -static int sun4i_i2s_startup(struct snd_pcm_substream *substream,
> > > > > > > -                          struct snd_soc_dai *dai)
> > > > > > > -{
> > > > > > > -     struct sun4i_i2s *i2s = snd_soc_dai_get_drvdata(dai);
> > > > > > > -
> > > > > > > -     /* Enable the whole hardware block */
> > > > > > > -     regmap_update_bits(i2s->regmap, SUN4I_I2S_CTRL_REG,
> > > > > > > -                        SUN4I_I2S_CTRL_GL_EN,
> > > > > > > SUN4I_I2S_CTRL_GL_EN);
> > > > > > > -
> > > > > > > -     /* Enable the first output line */
> > > > > > > -     regmap_update_bits(i2s->regmap, SUN4I_I2S_CTRL_REG,
> > > > > > > -                        SUN4I_I2S_CTRL_SDO_EN_MASK,
> > > > > > > -                        SUN4I_I2S_CTRL_SDO_EN(0));
> > > > > > > -
> > > > > > > -
> > > > > > > -     return clk_prepare_enable(i2s->mod_clk);
> > > > > > > -}
> > > > > > > -
> > > > > > > -static void sun4i_i2s_shutdown(struct snd_pcm_substream
> > > > > > > *substream,
> > > > > > > -                            struct snd_soc_dai *dai)
> > > > > > > -{
> > > > > > > -     struct sun4i_i2s *i2s = snd_soc_dai_get_drvdata(dai);
> > > > > > > -
> > > > > > > -     clk_disable_unprepare(i2s->mod_clk);
> > > > > > > -
> > > > > > > -     /* Disable our output lines */
> > > > > > > -     regmap_update_bits(i2s->regmap, SUN4I_I2S_CTRL_REG,
> > > > > > > -                        SUN4I_I2S_CTRL_SDO_EN_MASK, 0);
> > > > > > > -
> > > > > > > -     /* Disable the whole hardware block */
> > > > > > > -     regmap_update_bits(i2s->regmap, SUN4I_I2S_CTRL_REG,
> > > > > > > -                        SUN4I_I2S_CTRL_GL_EN, 0);
> > > > > > > -}
> > > > > > > -
> > > > > > > 
> > > > > > >  static int sun4i_i2s_set_sysclk(struct snd_soc_dai *dai, int
> > > > > > >  clk_id,
> > > > > > >  
> > > > > > >                               unsigned int freq, int dir)
> > > > > > >  
> > > > > > >  {
> > > > > > > 
> > > > > > > @@ -695,8 +661,6 @@ static const struct snd_soc_dai_ops
> > > > > > > sun4i_i2s_dai_ops = {> > > > > 
> > > > > > >       .hw_params      = sun4i_i2s_hw_params,
> > > > > > >       .set_fmt        = sun4i_i2s_set_fmt,
> > > > > > >       .set_sysclk     = sun4i_i2s_set_sysclk,
> > > > > > > 
> > > > > > > -     .shutdown       = sun4i_i2s_shutdown,
> > > > > > > -     .startup        = sun4i_i2s_startup,
> > > > > > > 
> > > > > > >       .trigger        = sun4i_i2s_trigger,
> > > > > > >  
> > > > > > >  };
> > > > > > > 
> > > > > > > @@ -869,6 +833,21 @@ static int sun4i_i2s_runtime_resume(struct
> > > > > > > device *dev)> > > > > 
> > > > > > >               goto err_disable_clk;
> > > > > > >       
> > > > > > >       }
> > > > > > > 
> > > > > > > +     /* Enable the whole hardware block */
> > > > > > > +     regmap_update_bits(i2s->regmap, SUN4I_I2S_CTRL_REG,
> > > > > > > +                        SUN4I_I2S_CTRL_GL_EN,
> > > > > > > SUN4I_I2S_CTRL_GL_EN);
> > > > > > > +
> > > > > > 
> > > > > > So this is definitely needed
> > > > > > 
> > > > > > > +     /* Enable the first output line */
> > > > > > > +     regmap_update_bits(i2s->regmap, SUN4I_I2S_CTRL_REG,
> > > > > > > +                        SUN4I_I2S_CTRL_SDO_EN_MASK,
> > > > > > > +                        SUN4I_I2S_CTRL_SDO_EN(0));
> > > > > > > +
> > > > > > > +     ret = clk_prepare_enable(i2s->mod_clk);
> > > > > > > +     if (ret) {
> > > > > > > +             dev_err(dev, "Failed to enable module clock\n");
> > > > > > > +             goto err_disable_clk;
> > > > > > > +     }
> > > > > > 
> > > > > > But we really don't want to enable the module clock before the
> > > > > > playback / capture actually starts. And I'm guessing it would make
> > > > > > more sense to keep the output enable configuration there as well,
> > > > > > since it's likely that we will have support for it in the future,
> > > > > > and
> > > > > > we'll need additional information from ASoC when we'll do.
> > > > > 
> > > > > Should we go with v1 version of my patch then? I see no reason to
> > > > > shuffle code around if we keep startup() and shutdown() hooks.
> > > > 
> > > > I'd go for something in between. runtime_pm already provides whether
> > > > the device is active or not, so you can just move the
> > > > SUN4I_I2S_CTRL_GL_EN write to the runtime_resume and runtime_suspend
> > > > functions, and that should fix your issue.
> > > 
> > > I still need to guard enabling output line with "if (dai->active)
> > > return", so it doesn't fix the issue unfortunately.
> > 
> > Why? The configuration is static, so it probably doesn't change much?
> 
> startup() and shutdown() are called once for each substream, i.e. for capture 
> and playback.
> 
> If we start playback and capture and the stop either we end up with calling 
> startup() twice and then shutdown() once. Since it disables I2S output it 
> breaks substream that is still working.

Ah, right, I forgot that case. In this case, yeah, your patch makes sense

Acked-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>

Thanks!
Maxime

-- 
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel



[Index of Archives]     [ALSA User]     [Linux Audio Users]     [Pulse Audio]     [Kernel Archive]     [Asterisk PBX]     [Photo Sharing]     [Linux Sound]     [Video 4 Linux]     [Gimp]     [Yosemite News]

  Powered by Linux