From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx> R-Car datasheet is indicating that WS output settings of SSICR::SWSP is inverted on TDM mode from non TDM mode settings. But, it is meaning that TDM should use 0 here. Without this patch, sound input/output 1ch will be 2ch, 2ch will be 3ch ..., be jumbled on I2S + TDM settings. This patch fixup it. This patch is tested on R-Car H3 ulcb-kf board, SSI3/4 TDM sound. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx> --- sound/soc/sh/rcar/ssi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c index b42a0e0..fcb4df2 100644 --- a/sound/soc/sh/rcar/ssi.c +++ b/sound/soc/sh/rcar/ssi.c @@ -392,7 +392,7 @@ static void rsnd_ssi_config_init(struct rsnd_mod *mod, if (rdai->bit_clk_inv) cr_own |= SCKP; - if (rdai->frm_clk_inv ^ is_tdm) + if (rdai->frm_clk_inv && !is_tdm) cr_own |= SWSP; if (rdai->data_alignment) cr_own |= SDTA; -- 2.7.4 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
