From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
"DACn Zero Flag" and "ADCn Overflow Flag" are read-only status
register. There is no detail explanation of these register on
datasheet, but, judging from it behavior, it seems these register
needs clock to reading.
Therefor, amixer command will be failed under non working timing.
Let's ignore these from snd_kcontrol_new so far, but keep it under #if 0.
Without this patch, amixer command offten failed and can't sound settings.
This patch is tested on R-Car H3 ulcb-kf board, SSI3/4 TDM sound.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
---
sound/soc/codecs/pcm3168a.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/sound/soc/codecs/pcm3168a.c b/sound/soc/codecs/pcm3168a.c
index 52cc950..29eaf9d 100644
--- a/sound/soc/codecs/pcm3168a.c
+++ b/sound/soc/codecs/pcm3168a.c
@@ -133,10 +133,13 @@ static const struct snd_kcontrol_new pcm3168a_snd_controls[] = {
SOC_DOUBLE("DAC2 Invert Switch", PCM3168A_DAC_INV, 2, 3, 1, 0),
SOC_DOUBLE("DAC3 Invert Switch", PCM3168A_DAC_INV, 4, 5, 1, 0),
SOC_DOUBLE("DAC4 Invert Switch", PCM3168A_DAC_INV, 6, 7, 1, 0),
+#if 0
+ /* read-only status register needs clocks */
SOC_DOUBLE_STS("DAC1 Zero Flag", PCM3168A_DAC_ZERO, 0, 1, 1, 0),
SOC_DOUBLE_STS("DAC2 Zero Flag", PCM3168A_DAC_ZERO, 2, 3, 1, 0),
SOC_DOUBLE_STS("DAC3 Zero Flag", PCM3168A_DAC_ZERO, 4, 5, 1, 0),
SOC_DOUBLE_STS("DAC4 Zero Flag", PCM3168A_DAC_ZERO, 6, 7, 1, 0),
+#endif
SOC_ENUM("DAC Volume Control Type", pcm3168a_dac_volume_type),
SOC_ENUM("DAC Volume Rate Multiplier", pcm3168a_dac_att_mult),
SOC_ENUM("DAC De-Emphasis", pcm3168a_dac_demp),
@@ -176,9 +179,12 @@ static const struct snd_kcontrol_new pcm3168a_snd_controls[] = {
SOC_DOUBLE("ADC1 Mute Switch", PCM3168A_ADC_MUTE, 0, 1, 1, 0),
SOC_DOUBLE("ADC2 Mute Switch", PCM3168A_ADC_MUTE, 2, 3, 1, 0),
SOC_DOUBLE("ADC3 Mute Switch", PCM3168A_ADC_MUTE, 4, 5, 1, 0),
+#if 0
+ /* read-only status register needs clocks */
SOC_DOUBLE_STS("ADC1 Overflow Flag", PCM3168A_ADC_OV, 0, 1, 1, 0),
SOC_DOUBLE_STS("ADC2 Overflow Flag", PCM3168A_ADC_OV, 2, 3, 1, 0),
SOC_DOUBLE_STS("ADC3 Overflow Flag", PCM3168A_ADC_OV, 4, 5, 1, 0),
+#endif
SOC_ENUM("ADC Volume Control Type", pcm3168a_adc_volume_type),
SOC_ENUM("ADC Volume Rate Multiplier", pcm3168a_adc_att_mult),
SOC_ENUM("ADC Overflow Flag Polarity", pcm3168a_adc_ov_pol),
--
2.7.4
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxx
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
