The driver already has support for setting the FDRB bit in the CONFA register through platform data, but there was no property to set it in the device-tree bindings. Signed-off-by: Daniel Mack <daniel@xxxxxxxxxx> --- Documentation/devicetree/bindings/sound/st,sta32x.txt | 3 +++ sound/soc/codecs/sta32x.c | 2 ++ 2 files changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/sound/st,sta32x.txt b/Documentation/devicetree/bindings/sound/st,sta32x.txt index 255de3ae5b2f..ff4a685a4303 100644 --- a/Documentation/devicetree/bindings/sound/st,sta32x.txt +++ b/Documentation/devicetree/bindings/sound/st,sta32x.txt @@ -39,6 +39,9 @@ Optional properties: - st,thermal-warning-recover: If present, thermal warning recovery is enabled. + - st,fault-detect-recovery: + If present, fault detect recovery is enabled. + - st,thermal-warning-adjustment: If present, thermal warning adjustment is enabled. diff --git a/sound/soc/codecs/sta32x.c b/sound/soc/codecs/sta32x.c index d5035f2f2b2b..22de1593443c 100644 --- a/sound/soc/codecs/sta32x.c +++ b/sound/soc/codecs/sta32x.c @@ -1038,6 +1038,8 @@ static int sta32x_probe_dt(struct device *dev, struct sta32x_priv *sta32x) of_property_read_u8(np, "st,ch3-output-mapping", &pdata->ch3_output_mapping); + if (of_get_property(np, "st,fault-detect-recovery", NULL)) + pdata->fault_detect_recovery = 1; if (of_get_property(np, "st,thermal-warning-recovery", NULL)) pdata->thermal_warning_recovery = 1; if (of_get_property(np, "st,thermal-warning-adjustment", NULL)) -- 2.17.1 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
