Thank you for the offer! I run gentoo, but your github guide is very useful. I can't seem to bind my audio driver to a pci-stud. Is the Sound card still supposed to function as normal when I (think I) have bound it to a stud. -Håvard Den tir. 11. sep. 2018 kl. 20:26 skrev Connor McAdams <conmanx360@xxxxxxxxx >: > One thing you could try, is using the program I used to reverse > engineer the Sound Blaster Z series of cards, QemuHDADump. If your > processor supports pci-passthrough with a virtual machine, you could > run a Windows virtual machine with the sound card in it and capture > the commands. I'd be willing to look through the dumps to see if there > are any special verbs or anything. > > You can find the program here: https://github.com/Conmanx360/QemuHDADump > > Let me know. > > On Tue, Sep 11, 2018 at 2:15 PM, Håvard <hovardslill@xxxxxxxxx> wrote: > > Sorry, my gmail didn't update so I wrote my response before I read your > > last one. > > > > It is a separate mic port as the G751JT doesn't have any headset > multijacks. > > > > I'll try and dig around in the kernel! Thanks for the tip! > > > > -Håvard > > > > Den tir. 11. sep. 2018 kl. 20:09 skrev Håvard <hovardslill@xxxxxxxxx>: > > > >> Thank you for taking your time and trying to help! :) > >> > >> Do you know where I can ask around for more help on the issue? I don't > >> want to give up yet. > >> > >> -Håvard > >> > >> Den tir. 11. sep. 2018 kl. 20:02 skrev Takashi Iwai <tiwai@xxxxxxx>: > >> > >>> On Tue, 11 Sep 2018 19:14:37 +0200, > >>> Håvard wrote: > >>> > > >>> > Yes, microphone gets detected instantly and it automatically changes > to > >>> it > >>> > in pavucontrol. > >>> > >>> Then it likely requires some additional initialization outside > >>> HD-audio. It's hard to know, as it's pretty much vendor-specific. > >>> You can dig down the Windows, but I have no idea about Windows > >>> implementation, so can't give any hints, unfortunately. > >>> > >>> > >>> Takashi > >>> > >>> > > >>> > Den tir. 11. sep. 2018 kl. 18:52 skrev Takashi Iwai <tiwai@xxxxxxx>: > >>> > > >>> > > On Tue, 11 Sep 2018 18:40:23 +0200, > >>> > > Håvard wrote: > >>> > > > > >>> > > > Thank you for replying! > >>> > > > > >>> > > > Enabling loopback in alsamixer: > >>> > > > http://i.imgur.com/lNo6e7T.png > >>> > > > > >>> > > > And unmuting more and more things in "Mic Playback Volume" in > >>> > > hdaanalyzer: > >>> > > > http://i.imgur.com/H0HiOhy.png > >>> > > > made white noise come from the headset. However it did not > change or > >>> > > react > >>> > > > at all when I talked or even muted the microphone physically. > >>> > > > > >>> > > > I couldn't find "Mic Playback Switch" anywhere in either > alsamixer > >>> or > >>> > > > hdaanalyzer. > >>> > > > >>> > > It's a mixer mute switch. > >>> > > > >>> > > > The microphone works perfectly fine under Windows, so I don't > think > >>> it is > >>> > > > the mic pin. > >>> > > > >>> > > But the fact above indicates the possibility of the wrong pin, too. > >>> > > > >>> > > Does the jack detection of the ext mic pin work? > >>> > > > >>> > > > >>> > > Takashi > >>> > > > >>> > > > > >>> > > > -Håvard > >>> > > > > >>> > > > Den man. 10. sep. 2018 kl. 22:39 skrev Takashi Iwai < > tiwai@xxxxxxx > >>> >: > >>> > > > > >>> > > > > On Thu, 06 Sep 2018 20:44:30 +0200, > >>> > > > > Håvard wrote: > >>> > > > > > > >>> > > > > > Additional relevant info: > >>> > > > > > > >>> > > > > > A similar issue was also discussed three years ago on Sun Jun > >>> > > 17:15:54 > >>> > > > > CEST > >>> > > > > > 2015 and was about his surround sound setup, but did not > touch > >>> on the > >>> > > > > > external microphone problem: > >>> > > > > > > >>> > > > > > >>> > > > >>> > http://mailman.alsa-project.org/pipermail/alsa-devel/2015-June/093317.html > >>> > > > > > > >>> > > > > > alsa-info.sh: > >>> > > > > > > >>> > > > > > >>> > > > >>> > http://www.alsa-project.org/db/?f=1d8616ba5977308e03db6c3a86e36e9e9b38d6f0 > >>> > > > > > > >>> > > > > > Graph of ALC668 chipset from hdaanalyzer: > >>> > > > > > http://i.imgur.com/c08DNJW.png > >>> > > > > > > >>> > > > > > setting alsa-mode[1-8] does nothing to help the issue. > >>> > > > > > > >>> > > > > > There are several of similar bug reports around the web > >>> experiencing > >>> > > > > > similar issues, and on different distros. > >>> > > > > > > >>> > > > > > Microphone works perfectly in windows > >>> > > > > > > >>> > > > > > I have a ASUS ROG G751JT, but this problem seems to happen > with > >>> all > >>> > > > > laptops > >>> > > > > > under the G751 name. > >>> > > > > > >>> > > > > When you enable the loopback volume and switch, and > unmute/adjust > >>> "Mic > >>> > > > > Playback Volume", and "Mic Playback Switch", do you hear the > input > >>> > > > > from the ext mic? It's a route directly from NID 0x18 to the > >>> mixer > >>> > > > > NID 0x0b, then output mixer NID 0x0c, then outputs. So this > can > >>> be > >>> > > > > used to verify the hardware routing. > >>> > > > > > >>> > > > > If you don't hear via this route, it means that the input from > >>> the ext > >>> > > > > mic pin itself is broken, and it implies that something outside > >>> > > > > HD-audio codec. > >>> > > > > > >>> > > > > > >>> > > > > Takashi > >>> > > > > > >>> > > > [2 <text/html; UTF-8 (quoted-printable)>] > >>> > > > > >>> > > > >>> > [2 <text/html; UTF-8 (quoted-printable)>] > >>> > > >>> > >> > > _______________________________________________ > > Alsa-devel mailing list > > Alsa-devel@xxxxxxxxxxxxxxxx > > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel > _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
